1. Instrucións de seguridade importantes
Lea todas as advertencias de seguridade, instrucións, ilustracións e especificacións proporcionadas con esta ferramenta eléctrica. O incumprimento de todas as instrucións que se indican a continuación pode producir descargas eléctricas, incendios e/ou lesións graves.
1.1 Seguridade xeral
- Always wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, heavy-duty long pants, and non-slip footwear.
- Manteña os nenos, os transeúntes e as mascotas a polo menos 15 metros (50 pés) de distancia da zona de funcionamento.
- Do not operate the brush cutter when you are tired, ill, or under the influence of drugs, alcohol, or medication.
- Inspect the work area for objects that could be thrown or entangled in the cutting attachment. Remove all debris.
1.2 Seguridade do combustible
- Manexe o combustible con extremo coidado. É altamente inflamable.
- Mix and store fuel in approved containers only.
- Do not smoke or allow flames or sparks near fuel or the brush cutter.
- Refuel outdoors only and wipe up any spills immediately.
- Deixe arrefriar o motor antes de repostar.
1.3 Seguridade no funcionamento
- Hold the brush cutter firmly with both hands during operation.
- Manter en todo momento unha posición e un equilibrio adecuados.
- Be aware of kickback, especially when using the blade.
- Never operate without the guard properly installed.
2. Produto rematadoview
The Hecht 152 BTS is a powerful gasoline-powered brush cutter designed for clearing dense grass and weeds. It features a 2-stroke engine and can be used with both a line spool head and a 3-tooth blade.
2.1 Compoñentes
- Unidade de motor
- Drive Shaft (disassemblable)
- Handlebar (adjustable)
- Throttle Control with Safety Lock
- Garda de corte
- Line Spool Head
- 3-Tooth Blade
- Arnés de mochila
- Depósito de combustible
- Corda de arranque
Image Placeholder: Product Diagram
A detailed diagram showing all labeled components of the Hecht 152 BTS brush cutter.
3. Configuración
3.1 Asemblea
- Attach the Drive Shaft: If disassembled for transport, connect the two parts of the drive shaft securely. Ensure the locking mechanism engages.
- Instalar o manillar: Mount the handlebar onto the drive shaft and tighten the clamping bolts. Adjust the angle for comfortable operation.
- Mount the Cutting Guard: Secure the cutting guard above the cutting attachment. Ensure it is firmly attached to protect against debris.
- Instalar o accesorio de corte: Choose between the line spool head or the 3-tooth blade. Follow the specific instructions for securing the chosen attachment. Ensure it is correctly seated and tightened.
- Attach Backpack Harness: Connect the backpack harness to the designated attachment points on the brush cutter. Adjust straps for a snug and balanced fit.
Image Placeholder: Assembly Diagram
Visual guide illustrating the steps for assembling the brush cutter, including attaching the shaft, handlebar, guard, and cutting head.
3.2 Abastecemento
The Hecht 152 BTS uses a 2-stroke engine and requires a specific fuel mixture of gasoline and 2-stroke engine oil. Refer to the engine oil manufacturer's instructions for the correct mixing ratio (typically 25:1 or 50:1).
- Preparación da mestura de combustible: Mix fresh unleaded gasoline with high-quality 2-stroke engine oil in an approved fuel container. Shake well.
- Open Fuel Cap: Ensure the engine is cool. Carefully open the fuel tank cap.
- Encher o depósito de combustible: Pour the mixed fuel into the tank, avoiding overfilling. Leave a small air gap.
- Tapa segura: Tightly close the fuel cap. Wipe away any spilled fuel.
4. Instrucións de funcionamento
4.1 Arranque do motor
- Prime the Carburetor: Prema a bombilla de cebado varias veces ata que se vexa o combustible.
- Axustar estrangulador: Mover a panca do estrangulador á posición "PECHADO" ou "ARRANQUE".
- Axustar o acelerador: Place the throttle lever in the 'START' or 'HALF THROTTLE' position.
- Corda de arranque: Hold the brush cutter firmly. Pull the starter rope slowly until resistance is felt, then pull sharply and quickly. Repeat until the engine fires (usually 1-3 pulls).
- Estrangulamento aberto: Once the engine fires, move the choke lever to the 'OPEN' or 'RUN' position.
- Restart (if necessary): If the engine stalls, repeat steps 4 and 5. If it runs, let it warm up for a few seconds before engaging the throttle fully.
4.2 Parar o motor
- Release Throttle: Deixe o motor en ralentí durante uns segundos.
- Press Stop Switch: Press and hold the engine stop switch until the engine completely shuts off.
4.3 Técnicas de corte
Always wear the backpack harness for balanced weight distribution and reduced fatigue.
- Line Trimmer Operation (430 mm cutting width): Use a sweeping motion from side to side. For automatic line feed, tap the cutting head gently on the ground while the engine is running at full throttle.
- Blade Operation (255 mm cutting width): For dense brush and small saplings, use the 3-tooth blade. Cut with a controlled, steady motion. Be aware of potential kickback.
- Manter o control: Always keep a firm grip on the handlebar and maintain good balance.
Image Placeholder: Operating Position
Illustration demonstrating the correct and safe operating posture with the brush cutter and backpack harness.
5. Mantemento
Regular maintenance ensures optimal performance and extends the life of your Hecht 152 BTS brush cutter. Always disconnect the spark plug wire before performing any maintenance.
5.1 Filtro de aire
- Comprobe regularmente: Inspect the air filter before each use or after every 5 hours of operation.
- Limpar/Substituír: Remove the air filter cover. Clean the filter element with warm, soapy water, rinse thoroughly, and allow to air dry completely. If heavily soiled or damaged, replace it.
5.2 Bujía
- Inspeccionar periodicamente: Check the spark plug after every 20 hours of operation.
- Limpar/Substituír: Remove the spark plug. Clean any carbon deposits with a wire brush. Check the electrode gap and adjust if necessary. Replace if electrodes are worn or insulation is cracked.
5.3 Accesorios de corte
- Line Spool Head: Replace the cutting line when it runs out. Use 2.5 mm diameter line.
- 3-Tooth Blade: Inspect the blade for damage, cracks, or dullness before each use. Sharpen or replace the blade as needed. Always ensure the blade is balanced after sharpening.
5.4 Almacenamento
- Limpar a fondo: Clean the entire brush cutter, removing all grass, dirt, and debris.
- Drenar combustible: For long-term storage (over 30 days), drain the fuel tank and run the engine until it stops to clear the carburetor.
- Almacenar de forma segura: Store the brush cutter in a dry, well-ventilventilated area, out of reach of children.
Image Placeholder: Maintenance Points
Diagram highlighting key maintenance areas such as the air filter, spark plug, and cutting head attachment points.
6 Solución de problemas
Before attempting any repairs, ensure the engine is off and the spark plug wire is disconnected.
| Problema | Causa posible | Solución |
|---|---|---|
| O motor non arranca | Sen combustible ou mestura de combustible incorrecta Estrangulador non axustado correctamente Spark plug fouled or wet Filtro de aire obstruído | Comprobar o nivel e a mestura de combustible Adjust choke to 'CLOSED' for cold start Limpar ou substituír a bujía Limpar o filtro de aire |
| Engine runs, then stalls | Abertura de ventilación da tapa de combustible bloqueada Filtro de combustible obstruído Velocidade de ralentí demasiado baixa | Clean fuel cap vent Substitúe o filtro de combustible Adjust idle speed (refer to service manual) |
| Perda de potencia durante o funcionamento | Filtro de aire obstruído Spark plug faulty Mestura de combustible incorrecta | Limpar o filtro de aire Substitúe a bujía Ensure correct fuel-oil ratio |
| Vibración excesiva | Loose cutting attachment Lámina danada ou desequilibrada Bent drive shaft | Tighten cutting attachment Replace or balance blade Póñase en contacto co centro de servizo |
7. Especificacións
| Característica | Especificación |
|---|---|
| Modelo | Hecht 152 BTS |
| Tipo de motor | Single-cylinder, 2-stroke |
| Max. Engine Power | 1.6 kW (2.2 PS) |
| Desprazamento | 52 cm³ |
| Velocidade nominal | 6500 rpm |
| Peso | 7.9 kg |
| Blade Cutting Width | 255 mm |
| Line Spool Cutting Width | 430 mm |
| Espesor da liña | 2.5 mm |
| Tipo de combustible | Gasoline/2-stroke oil mixture |
8. Garantía e soporte
Hecht products are manufactured to high-quality standards and are guaranteed against manufacturing defects. Please retain your proof of purchase for warranty claims.
The warranty period typically covers defects in materials and workmanship under normal use. It does not cover wear and tear parts, misuse, neglect, or unauthorized modifications.
For warranty service, technical support, or to order replacement parts, please contact your authorized Hecht dealer or visit the official Hecht websitio para información de contacto.
Información de contacto:
Please refer to your purchase documentation or the official Hecht website for the most up-to-date service and support contact details in your region.