VOX BC108 Black Cab Series Amparmario lifier

1. Introdución

The VOX BC108 Black Cab Series Amplifier Cabinet is a compact and portable speaker cabinet designed to deliver quality sound for guitar amplification. Featuring an 8-inch speaker and 25 Watts of power handling, it is ideal for practice, studio use, and small venues. This manual provides essential information for the safe and effective use of your BC108 cabinet, ensuring optimal performance and longevity.

Figura 1: Fronte view of the VOX BC108 Amplifier Cabinet.

2. Precaucións de seguridade

To prevent electric shock, fire, or damage to the unit, please read and follow all instructions carefully.

• Fonte de enerxía: This cabinet is passive and does not require direct power. Ensure any connected amplifier is properly grounded and uses the correct voltage.
• Ventilación: Do not block any ventilation openings. Ensure adequate airflow around the cabinet.
• Auga e humidade: Non expoña a unidade á choiva, á humidade ou a un exceso de humidade. Non coloque obxectos cheos de líquidos enriba ou preto da unidade.
• Calor: Manteña a unidade lonxe de fontes de calor como radiadores, reixas de calor, estufas ou outros aparellos que produzan calor.
• Limpeza: Limpar só cun pano seco. Non utilice produtos de limpeza líquidos nin produtos de limpeza en aerosois.
• Servizo: Non intente atender este produto vostede mesmo. Remita todo o servizo a persoal de servizo cualificado.
• Colocación: Place the cabinet on a stable, level surface to prevent it from falling.
• Cables de altofalantes: Use high-quality speaker cables with appropriate gauge for connections to prevent signal loss or damage.

3. Contido do paquete

Verifica que todos os elementos estean presentes no paquete:

• VOX BC108 Amparmario lifier
• Speaker Cable (may vary by region/retailer)
• Manual de instrucións (este documento)

4. Configuración

Follow these steps to set up your VOX BC108 amplifier cabinet:

1. Colocación: Position the BC108 cabinet on a stable surface. For optimal sound projection, consider placing it on the floor or on a sturdy stand.
2. Conectando a un Amplifier Head:

   Locate the speaker output jack on your amplifier head and one of the input jacks on the rear of the BC108 cabinet. Use a high-quality speaker cable to connect these two points. Ensure both the amplifier and the cabinet are powered off before making connections.

   

   Figure 2: The BC108 cabinet paired with an MV50 ampcabeza lificadora.

   

   Figure 3: Rear panel of the BC108, illustrating the parallel speaker jacks.

3. Adaptación de impedancia: The BC108 has an impedance of 8 Ohms. Ensure your amplifier head's output impedance setting matches or is compatible with the cabinet's impedance to prevent damage to your ampmáis vivo.
4. Parallel Speaker Jacks: The BC108 features two parallel speaker jacks. One jack serves as the input from your amplifier, and the other can be used to connect an additional speaker cabinet in parallel. When connecting two 8-Ohm cabinets in parallel, the total impedance presented to the amplifier will be 4 Ohms. Ensure your amplifier can safely operate at this lower impedance.

5. Funcionamento

The BC108 is a passive speaker cabinet and its operation is directly controlled by the connected ampcabeza lificadora.

• Encendido/apagado: Acende o teu amplifier head after all connections are securely made. Turn off the amplifier head before disconnecting any cables.
• Control de volume: Adjust the volume and tone settings directly on your ampcabeza lificadora.
• Daisy-Chaining (Connecting Multiple Cabinets): If you wish to connect a second 8-Ohm cabinet, use a speaker cable to connect the second parallel jack on the BC108 to the input of the additional cabinet. Remember that this configuration will result in a 4-Ohm load for your ampmáis vivo.


Figure 4: Two BC108 cabinets stacked, demonstrating a potential multi-cabinet setup.

6. Mantemento

Proper maintenance ensures the longevity and performance of your BC108 cabinet.

• Limpeza: Wipe the exterior of the cabinet with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish.
• Almacenamento: When not in use for extended periods, store the cabinet in a dry, temperature-controlled environment, away from direct sunlight and extreme temperatures.
• Inspección: Periodically check speaker cables for any signs of wear or damage. Replace damaged cables immediately.

7 Solución de problemas

If you encounter issues with your BC108 cabinet, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact VOX customer support or a qualified service technician.

8. Especificacións

9. Información da garantía

The VOX BC108 Amplifier Cabinet comes with a 1 ano de garantía limitada from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, unauthorized repair, or normal wear and tear.

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VOX websitio.

10. Atención ao cliente

If you have any questions, require technical assistance, or need to arrange for service, please contact VOX customer support:

• Websitio: Visit the official VOX websitio web con preguntas frecuentes, recursos de asistencia e información de contacto.
• Contacto: Refer to the contact section on the VOX websitio para obter números de teléfono ou asistencia por correo electrónico.
• Concesionario: Contact your authorized VOX dealer for local support and service options.