Narita Electric Hot Water Dispenser (2.3L) Instruction Manual

Garantías importantes

Lea atentamente todas as instrucións antes de usar este aparello. O incumprimento destas instrucións pode provocar descargas eléctricas, incendios ou lesións graves.

• Non mergullo o aparello, o cable ou o enchufe en auga ou outros líquidos.
• Este aparello é só para uso doméstico. Non use ao aire libre.
• Always place the dispenser on a stable, flat, heat-resistant surface.
• Keep out of reach of children. Hot water can cause severe burns.
• Desenchufe da toma cando non estea en uso e antes de limpalo. Deixar arrefriar antes de poñer ou quitar pezas e antes de limpar o aparello.
• Non faga funcionar ningún aparello cun cable ou enchufe danados, ou despois de que o aparello funcione mal ou teña dano dalgún xeito.
• Non deixes que o cable de alimentación colgue sobre o bordo dunha mesa ou mostrador nin toque superficies quentes.
• Non o coloque sobre ou preto dun queimador eléctrico ou de gas quente, nin nun forno quente.
• Asegúrese sempre de que a tapa estea ben pechada durante o funcionamento.
• Do not fill above the maximum fill line.
• Use only cold, potable water in the dispenser.

Produto rematadoview

The Narita Electric Hot Water Dispenser is designed for convenient access to hot water. It features a durable stainless steel housing and inner liner, with a 2.3-liter capacity. The unit includes an automatic re-boil and keep warm function, and a 360-degree rotating base for ease of use.

Características principais:

• 3-Way Dispensing System: Air Pump, Electric Pump, and Cup Touch.
• Stainless Steel Housing and Inner Liner.
• Automatic Re-boil and Keep Warm Function.
• 360° Rotating Base.
• 2.3 Liter Capacity.

Compoñentes:

• Main Unit (Dispenser Body)
• Montaxe de tapa
• Cable de alimentación
• Indicador de nivel de auga
• Boca dosificadora
• Control Panel (Buttons for Electric Pump, Re-boil, Lock/Unlock)
• Botón da bomba de aire

Configuración e primeiro uso

1. Desembalaxe: Carefully remove the dispenser from its packaging. Retain packaging for future storage or transport.
2. Limpeza inicial: Before first use, clean the interior of the dispenser.
   • Open the lid and wipe the interior with a damp pano.
   • Fill the dispenser with clean water up to the MAX line.
   • Boil the water and dispense it completely. Discard this water.
   • Repeat this process 2-3 times to ensure thorough cleaning and remove any manufacturing residues.
3. Colocación: Place the dispenser on a stable, flat, heat-resistant surface, away from walls or other appliances to allow for proper ventilation.
4. Conexión de alimentación: Conecte o cable de alimentación a unha toma de corrente estándar de 120 V/60 Hz.

Instrucións de funcionamento

Enchendo o dispensador:

1. Asegúrese de que o dispensador estea desenchufado.
2. Abre a tapa.
3. Fill the inner pot with cold, potable water. Do not exceed the "MAX" fill line.
4. Peche a tapa firmemente ata que encaixe no seu lugar.
5. Plug the dispenser into a power outlet. The unit will automatically begin heating the water to boiling point.

Dispensing Hot Water (3 Ways):

The Narita Electric Hot Water Dispenser offers three convenient methods for dispensing hot water:

This image illustrates the three dispensing methods: Air Pump, Electric Pump, and Cup Touch. Each method is shown with a hand demonstrating the action on the dispenser.

1. Air Pump Dispensing:

   This method does not require electricity. Press the large air pump button located on the top of the lid repeatedly to manually pump water out of the spout. This is useful during power outages or when the unit is unplugged.

2. Electric Pump Dispensing:

   Ensure the dispenser is plugged in and powered on. Press the "Unlock" button (if locked) and then press and hold the "Electric Pump" button on the control panel. Water will dispense from the spout. Release the button to stop the flow.
3. Dispensación de vasos táctiles:

   Ensure the dispenser is plugged in and powered on. Press the "Unlock" button (if locked). Position your cup against the lever located behind the dispensing spout. The pressure from the cup will activate the dispenser, and water will flow. Remove the cup to stop the flow.

Re-boil and Keep Warm Function:

• After boiling, the dispenser automatically switches to the "Keep Warm" mode, maintaining the water at a hot temperature.
• If the water temperature drops below the desired level, or if you add new cold water, you can press the "Re-boil" button to bring the water back to boiling point.

Mantemento e Limpeza

Regular cleaning and maintenance will ensure the longevity and optimal performance of your hot water dispenser.

Limpeza exterior:

• Always unplug the dispenser and allow it to cool completely before cleaning.
• Limpe as superficies exteriores cun suave, damp pano.
• Non empregues produtos de limpeza abrasivos, estropaxos nin produtos químicos agresivos, xa que poden danar o acabado.
• Asegúrate de que non entre auga nos compoñentes eléctricos.

Limpeza e descalcificación interiores:

Over time, mineral deposits (limescale) can build up inside the dispenser, especially in hard water areas. Descaling is recommended every 1-3 months, depending on water hardness and usage.

1. Unplug the dispenser and empty any remaining water.
2. Fill the dispenser with a solution of water and white vinegar (e.g., 1 part vinegar to 2 parts water) or a commercial descaling agent suitable for hot water dispensers. Do not exceed the MAX fill line.
3. Close the lid and plug in the dispenser. Allow the solution to boil and then remain in the "Keep Warm" mode for approximately 1 hour.
4. Unplug the dispenser and carefully pour out the descaling solution.
5. Rinse the interior thoroughly with clean water several times to remove any residue and vinegar smell.
6. Perform an initial cleaning cycle (fill with clean water, boil, dispense, discard) 2-3 times before resuming normal use.

Resolución de problemas

Especificacións

• Modelo: B06X1CMDDX
• Marca: Narita
• Capacidade: 2.3 litros
• Voltage: 120 V
• Frecuencia: 60 Hz
• Consumo de enerxía: 750 W
• Material: Stainless Steel (Housing and Inner Liner)
• Cor: Prata
• UPC: 643108235082

Garantía e Soporte

This Narita Electric Hot Water Dispenser is covered by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your purchase or contact Narita customer service directly.

Please have your model number (B06X1CMDDX) and purchase date available when contacting support.