1. Introdución
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Salus RT310i Smart Thermostat. Please read this manual carefully before installation and use to ensure safe and efficient operation.
The Salus RT310i is a wireless, internet-controlled thermostat designed to provide precise temperature control for your heating system, offering convenience and energy efficiency through remote access via a smartphone application.
2. Información de seguridade
Importante: Installation should only be carried out by a qualified electrician or competent person. Always isolate the mains supply before commencing any electrical work.
- Asegúrese de que a fonte de alimentación estea desconectada antes da instalación ou mantemento.
- Non expoña o dispositivo á humidade nin a temperaturas extremas.
- Manter fóra do alcance dos nenos.
- Follow all local regulations and safety standards during installation.
3. Contido do paquete
Verifica que todos os compoñentes estean presentes no paquete:
- RT310i Thermostat
- RT310i Receiver
- Internet Gateway (iTG500)
- USB Power Cable and Adapter
- Cable Ethernet
- Parafusos de montaxe e tacos de parede
- Guía de inicio rápido
4. Configuración
4.1. Instalación do receptor
The receiver connects directly to your boiler or heating system. It should be installed in a dry, accessible location, away from metal objects that could interfere with the wireless signal.
- Isolate Power: Turn off the mains power supply to your heating system at the consumer unit.
- Receptor de montaxe: Use the provided screws and wall plugs to securely mount the receiver to a wall.
- Cableado: Connect the receiver to your boiler according to the wiring diagram provided in the Quick Start Guide. Typically, this involves Live, Neutral, and Switched Live connections. Consulte cun electricista cualificado se non ten dúbidas sobre o cableado.
- Restaurar enerxía: Once wiring is complete and secure, restore the mains power supply. The receiver's LED indicators should illuminate.
No product images were provided for this section. An image showing the receiver's wiring terminals and typical boiler connections would be beneficial here.
4.2. Thermostat Placement
The RT310i thermostat is wireless and can be placed anywhere in your living space. For optimal performance, consider the following:
- Place it in a main living area, away from direct sunlight, drafts, or heat sources (e.g., radiators, TVs).
- Ensure it is at a height of approximately 1.5 meters from the floor.
- Avoid placing it behind curtains or furniture.
No product images were provided for this section. An image illustrating ideal thermostat placement in a room would enhance clarity.
4.3. Internet Gateway (iTG500) Setup
The iTG500 gateway connects your thermostat to the internet, allowing remote control.
- Conectar enerxía: Plug the USB power cable into the iTG500 gateway and then into the power adapter. Plug the adapter into a wall socket.
- Conectar ao enrutador: Use the provided Ethernet cable to connect the iTG500 gateway to an available LAN port on your internet router.
- Comprobar os LED: Once powered, the gateway's LEDs should indicate a successful connection to both power and the internet. Refer to the gateway's specific manual for LED status meanings.
No product images were provided for this section. An image showing the iTG500 gateway connected to a router and power would be helpful.
4.4. Emparellar os dispositivos
The thermostat, receiver, and gateway need to be paired to communicate.
- Receiver Pairing Mode: Press and hold the pairing button on the receiver until its LED starts flashing.
- Modo de emparellamento do termostato: On the RT310i thermostat, navigate to the pairing menu (refer to the Quick Start Guide for specific button presses).
- Gateway Pairing: Open the Salus Smart Home app on your smartphone. Follow the in-app instructions to add a new device and pair the gateway. The app will guide you through connecting the thermostat and receiver to the gateway.
- Confirmación: Once successfully paired, the LEDs on the receiver and gateway will indicate a stable connection, and the thermostat will display the current temperature.
No product images were provided for this section. Images showing the pairing buttons on the receiver and thermostat, and screenshots of the app pairing process, would be beneficial.
4.5. Instalación da aplicación e creación de conta
To control your RT310i remotely, download the Salus Smart Home app.
- Download the "Salus Smart Home" app from the Apple App Store or Google Play Store.
- Create a new user account or log in if you already have one.
- Follow the in-app instructions to add your RT310i system.
No product images were provided for this section. Screenshots of the app store pages and the app's initial setup screens would be useful.
5. Instrucións de funcionamento
5.1. Manual Control (Thermostat)
You can adjust the temperature directly on the RT310i thermostat.
- Temperatura establecida: Use the UP/DOWN buttons to adjust the desired temperature. The new setpoint will be displayed.
- Anulación temporal: If a schedule is active, manually changing the temperature will temporarily override the schedule until the next scheduled event.
- Selección de modo: Some models may have a mode button to switch between Heat, Cool (if applicable), and Off modes.
No product images were provided for this section. An image of the thermostat's display and buttons would be helpful.
5.2. Control de aplicacións
The Salus Smart Home app provides full control and scheduling capabilities.
- Estado actual: View the current room temperature and setpoint.
- Axustar a temperatura: Drag the temperature dial or use +/- buttons to change the setpoint.
- Programación: Create and modify heating schedules for different days and times.
- Modos: Switch between various operating modes (e.g., Auto, Manual, Holiday, Frost Protection).
- Geofencing: Set up geofencing to automatically adjust heating based on your proximity to home.
No product images were provided for this section. Screenshots of the app's main control screen and scheduling interface would be highly beneficial.
5.3. Programación
Program your heating schedule for optimal comfort and energy savings.
- Open the Salus Smart Home app and select your RT310i thermostat.
- Vaia á sección "Programa" ou "Programa".
- Choose the day(s) you wish to program.
- Set time periods and corresponding desired temperatures. You can typically set multiple events per day (e.g., morning, day, evening, night).
- Garda os teus cambios.
No product images were provided for this section. Screenshots of the app's scheduling interface would be very useful.
6. Mantemento
The Salus RT310i thermostat requires minimal maintenance to ensure continued optimal performance.
- Limpeza: Limpe as superficies do termostato e do receptor cun pano suave e seco. Non empregue produtos de limpeza abrasivos nin solventes.
- Battery Replacement (Thermostat): The thermostat is typically powered by AA batteries. When the low battery indicator appears on the display, replace the batteries with new alkaline batteries. Ensure correct polarity.
- Actualizacións de firmware: The gateway and thermostat firmware may be updated automatically via the internet. Ensure your gateway remains connected to the internet for these updates.
No product images were provided for this section. An image showing how to open the thermostat to replace batteries would be helpful.
7 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| No display on thermostat | Baterías agotadas | Substitúe as pilas por outras novas. |
| Heating not turning on |
|
|
| Cannot control via app |
|
|
| Lectura de temperatura inexacta | Thermostat placed in an unsuitable location (e.g., near heat source, draft). | Relocate the thermostat to a more central and stable temperature area (see Section 4.2). |
No product images or videos were provided for this section. A video demonstrating common troubleshooting steps, such as re-pairing, would be highly beneficial.
8. Especificacións
| Característica | Detalle |
|---|---|
| Fonte de alimentación (termostato) | 2 x pilas alcalinas AA |
| Fonte de alimentación (Receptor) | 230V CA 50Hz |
| Power Supply (Gateway) | 5V DC (via USB adapter) |
| Max Load (Receiver) | 16 (5) A |
| Rango de temperatura | 5 °C - 35 °C |
| Algoritmo de control | ITLC (Internal Temperature Load Compensation) |
| Comunicación | 868 MHz (Thermostat to Receiver), Ethernet (Gateway to Router) |
| Compatibilidade de aplicacións | Salus Smart Home (iOS & Android) |
9. Información da garantía
Salus Controls provides a 5-year warranty from the date of purchase against defects in materials or workmanship. This warranty does not cover damage caused by improper installation, misuse, or normal wear and tear. Proof of purchase is required for all warranty claims.
For full terms and conditions, please refer to the official Salus Controls websitio ou póñase en contacto co servizo de atención ao cliente.
10. Atención ao cliente
If you encounter any issues or have questions regarding your Salus RT310i Smart Thermostat, please contact Salus Controls customer support:
- Websitio: www.salus-controls.com
- Correo electrónico: Consulte o website for regional support email addresses.
- Teléfono: Consulte o websitio web para obter números de teléfono de asistencia rexional.
Please have your product model (RT310i) and serial number (if applicable) ready when contacting support.
