Lepro Industrial LED Desk Lamp

Introdución

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Este versátil lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

Lea este manual detidamente antes da instalación e o funcionamento e gárdeo para futuras consultas.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

Instrucións de seguridade

• Read all instructions carefully before using the lamp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Use só lámpadas de base E27 cunha potencia máximatage de 40W.
• Non use o lamp cun cable de alimentación ou enchufe danado.
• Este produto está destinado unicamente para uso en interiores. Non o expoña á auga nin a alta humidade.
• Manteña o lamp lonxe de materiais inflamables.
• Non intente desmontar nin reparar o lamp vostede mesmo. Póñase en contacto con persoal cualificado para o servizo técnico.

Contido do paquete

Comprobe se o paquete contén os seguintes elementos:

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• Manual de usuario

Nota: A lámpada E27 non está incluída e debe mercarse por separado.

Configuración e instalación

Sigue estes pasos para montar e instalar o teu escritorioamp:

1. Adxunta o Clamp: Suxeitar firmemente o clamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. Montar o Lamp Xefe: Instala o lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. Inserir o brazo: Insira coidadosamente o lamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. Instala a lámpada: Asegurar o lamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp enchufe. Non aperte demasiado.
5. Conectar á enerxía: Enchufe o lampo cable de alimentación nunha toma de corrente axeitada.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

Imaxe: O lamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

Instrucións de funcionamento

Encendido/apagado: Locate the rocker switch on the power cord. Press the switch to turn the lamp on ou off.

Axuste do ángulo de luz: O lamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

Imaxe: O lamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

Mantemento

Limpeza: Para limpar o lamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

Substitución da lámpada: Before replacing the bulb, ensure the lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp de novo dentro.

Resolución de problemas

• Lamp non acende:
  • Comprobe se o cable de alimentación está ben conectado á toma de corrente.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • Check the power outlet by plugging in another device.
• A luz parpadea:
  • Asegúrate de que a lámpada estea ben aparafusada.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Comprobe se hai conexións soltas no cable de alimentación ou na toma de corrente.
• Lamp é inestable:
  • Asegúrese de que o clamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • Comproba que o lamp arm is properly inserted into the clamp articulación.

Especificacións

Image: Product dimensions and key features like E27 bulb base and power cord length.

Garantía e Soporte

Garantía: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Atención ao cliente: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.