Introdución
Thank you for choosing the Artemide Crazy Wall/Ceiling Lamp, Model 1638020A. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
Instrucións de seguridade importantes
To ensure safe operation and prevent damage, always follow these precautions:
- Seguridade eléctrica: Always disconnect power at the main circuit breaker before installing, servicing, or cleaning the fixture. Ensure all electrical connections comply with local codes and regulations. If you are unsure about wiring, consult a qualified electrician.
- Instalación: This fixture is designed for wall or ceiling mounting. Ensure the mounting surface is structurally sound and can support the weight of the lamp (approximately 7 kg). Do not install in damp ou lugares húmidos.
- Manexo: Manexa o lamp con coidado. Evite deixalo caer nin sometelo a impactos fortes.
- LED integrado: Este lamp features an integrated LED light source. Do not attempt to replace the LED bulbs yourself. Contact qualified service personnel if the light source requires attention.
- Limpeza: Use only a soft, dry cloth for cleaning. Avoid abrasive cleaners or solvents that may damage the finish or electrical components.
Contido do paquete
Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:
- Artemide Crazy Lamp (1 unidade)
- Ferramentas de montaxe (parafusos, ancoraxes)
- Manual de instrucións (este documento)
Configuración e instalación
Installation should be performed by a qualified professional or a person with sufficient electrical knowledge.
Ferramentas necesarias (non incluídas)
- Desaparafusador (cabeza Phillips)
- Perforar coas brocas adecuadas
- Descascados de fíos
- Voltagprobador
- Pencil and measuring tape
Instrucións de montaxe
- Apagar a enerxía: Localiza o disyuntor que controla a localización da luminaria e desconecta a alimentación. Verifica que a alimentación estea desconectada usando un volímetro.tagprobador.
- Preparar superficie de montaxe: Marca a localización desexada para a lamp on the wall or ceiling. Use the mounting bracket as a template to mark drill holes.
- Perforación: Drill pilot holes at the marked locations. Insert wall anchors if necessary for secure mounting.
- Fixar o soporte de montaxe: Fixe o soporte de montaxe á parede ou ao teito usando os parafusos proporcionados.
- Conexión eléctrica: Conecte coidadosamente o lamp's electrical wires to the household wiring. Typically, connect the live (black/brown) wire from the lamp to the live wire from the wall, the neutral (white/blue) wire from the lamp to the neutral wire from the wall, and the ground (green/yellow) wire to the ground wire. Ensure all connections are secure with wire nuts.
- Adxunta Lamp Fixación: Aliñar coidadosamente a lamp fixture with the mounting bracket and secure it in place using the provided screws. Ensure no wires are pinched.
- Restaurar enerxía: Unha vez que o lamp estea instalado de forma segura e comprobadas todas as conexións, restableza a alimentación no disxuntor.
Image: The Artemide Crazy Wall/Ceiling Lamp, mostrarasing its design and taupe color. This image illustrates the general appearance of the product after installation.
Nota sobre os vídeos: No official product installation videos were available from the seller for this model. Please refer to the detailed written instructions above.
Operando a Lamp
The Artemide Crazy Lamp está deseñado para un funcionamento sinxelo.
- Activar/Desactivar: Operar o lamp using a standard wall switch connected to its electrical circuit.
- Fonte de luz: O lamp features an integrated LED light source, providing consistent illumination.
Coidados e Mantemento
Proper care will ensure the longevity and appearance of your Artemide Crazy Lamp.
- Limpeza: Before cleaning, ensure the power to the fixture is turned off at the circuit breaker. Use a soft, dry, lint-free cloth to gently wipe the surface of the lamp. For stubborn marks, a slightly damp cloth may be used, followed immediately by a dry cloth.
- Evitar produtos químicos: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the ABS/Polycarbonate/Technopolymer material and finish.
- LED integrado: The LED light source is integrated and designed for a long lifespan. It does not require routine replacement. If the light source fails, contact customer support.
Resolución de problemas
Se tes problemas co teu lamp, consulte a seguinte táboa para ver os problemas e as solucións máis habituais.
| Problema | Causa posible | Solución |
|---|---|---|
| Lamp non se ilumina. | Sen fonte de alimentación. Conexión eléctrica solta. Interruptor de parede avariado. | Comprobe se o disxuntor está activado. Asegúrate de que todas as conexións dos cables estean seguras (coa alimentación desconectada). Proba o interruptor de parede ou consulta cun electricista. |
| Luz parpadea. | Conexión eléctrica solta. Incompatible dimmer switch (if applicable, though not specified for this model). | Comprobe todas as conexións eléctricas (coa alimentación desconectada). Asegurar o lamp is connected to a compatible circuit. |
| Lamp está danado. | Impacto físico. Defecto de fabricación. | Discontinue use. Contact customer support for assistance. |
Especificacións técnicas
Detailed specifications for the Artemide Crazy Wall/Ceiling Lamp:
| Característica | Especificación |
|---|---|
| Número de modelo | 1638020A |
| Marca | Artemida |
| Deseñador | Ernesto Gismondi |
| Dimensións (L x W x H) | 70 x 0.1 x 10 cm |
| Peso | 7 quilogramos |
| Material | ABS/Polycarbonate/Technopolymer, Acrylonitrile Butadiene Styrene |
| Cor | Taupe (Shade color: White) |
| Tipo de montaxe | Montaxe en parede ou teito |
| Tipo de fonte de luz | LED integrado |
| Número de fontes de luz | 1 |
| Wattage | 35 vatios |
| Eficacia luminosa | 3310 lúmenes |
| Temperatura da cor | 2700 Kelvin |
| Etiqueta enerxética | A++ |
| Fonte de enerxía | Cable eléctrico |
| Fabricante | Eden Illuminizione |
Garantía e Atención ao Cliente
Artemide products are manufactured to high-quality standards and are covered by a limited warranty against manufacturing defects. Please refer to the warranty card included with your purchase or visit the official Artemide websitio web para obter información detallada sobre os termos e condicións da garantía.
For technical assistance, replacement parts, or any questions regarding your Artemide Crazy Lamp, please contact your authorized Artemide dealer or customer service department. Contact information can typically be found on the official Artemide websitio web ou na documentación da súa compra.