BEPER 40.300 Hair Clipper User Manual

1. Introdución

This manual provides essential instructions for the safe and effective use of your BEPER 40.300 Hair Clipper. Please read all instructions carefully before operating the device and retain this manual for future reference. The BEPER 40.300 is a rechargeable hair clipper equipped with ceramic and titanium blades, designed for precise cutting and comfortable handling.

2. Información de seguridade

• Manteña o aparello seco. Non o empregue preto da auga nin en condicións húmidas.
• Non mergullo o aparello en auga ou outros líquidos.
• Manter fóra do alcance dos nenos.
• Asegúrate de que o adaptador de corrente sexa compatible coa túa fonte de alimentación local.
• Desenchufe o aparello antes da limpeza ou mantemento.
• Do not use if the blades are damaged or broken, as this may cause injury.
• Only use original accessories provided by the manufacturer.

3. Contido do paquete

Desembala a caixa con coidado e asegúrate de que todos os artigos estean presentes e en bo estado. Se falta algún artigo ou está danado, ponte en contacto co teu vendedor.

Image: The BEPER 40.300 Hair Clipper shown with all included accessories.

• BEPER 40.300 Hair Clipper
• Adaptador de carga
• Cepillo de limpeza
• Botella de aceite lubricante
• 4 Interchangeable Comb Attachments (3mm, 6mm, 9mm, 12mm)

4. Produto rematadoview

Familiarize yourself with the main components of your hair clipper before use.

Imaxe: Lateral view of the BEPER 40.300 Hair Clipper, highlighting its ergonomic design.

• Ceramic and Titanium Blades: For precise and efficient cutting.
• Adjustable Rotary Ring: Allows for fine-tuning of cutting lengths from 0.8mm to 2mm.
• Interruptor de alimentación: To turn the clipper on and off.
• Porto de carga: Para conectar o adaptador de carga.
• Mango ergonómico: Deseñado para un agarre e control cómodos.

5. Configuración

5.1 Carga da cortadora

1. Ensure the clipper is switched off.
2. Connect the charging adapter to the charging port on the clipper.
3. Enchufe o adaptador nunha toma de corrente adecuada.
4. Allow approximately 8 hours for a full charge. A fully charged clipper provides up to 60 minutes of continuous operation.
5. Do not overcharge the battery. Unplug the charger once charging is complete.

5.2 Colocación dos accesorios de peite

The clipper comes with 4 comb attachments for different cutting lengths (3mm, 6mm, 9mm, 12mm).

1. Ensure the clipper is switched off.
2. Seleccione o accesorio de peite desexado.
3. Align the comb attachment with the clipper head and slide it on until it clicks securely into place.
4. To remove, gently push the comb attachment upwards and slide it off.

6. Instrucións de funcionamento

6.1 Funcionamento básico

1. Ensure the clipper is fully charged or connected to power if using corded.
2. Select your desired cutting length using either the adjustable rotary ring or by attaching a comb guide.
3. Press the power switch to turn on the clipper.
4. Hold the clipper with the blades facing downwards and gently move it against the direction of hair growth.
5. For best results, use on clean, dry hair.
6. After use, press the power switch to turn off the clipper.

6.2 Adjusting Cutting Length (without comb attachment)

The rotary ring allows for precise adjustments of the blade length from 0.8mm to 2mm.

Image: Detail of the adjustable rotary ring on the BEPER 40.300 Hair Clipper, showing length settings.

• Rotate the ring located just below the blades to select your desired length: 0.8mm, 1.1mm, 1.4mm, 1.7mm, or 2mm.
• Ensure the ring clicks into place at the chosen setting before use.

6.3 Using Comb Attachments

For longer cutting lengths, use the provided comb attachments (3mm, 6mm, 9mm, 12mm).

• Attach the desired comb attachment as described in Section 5.2.
• The rotary ring setting will be overridden by the comb attachment.
• Move the clipper smoothly through the hair, ensuring the comb attachment remains flat against the scalp or skin.

7. Mantemento

Regular cleaning and maintenance will ensure optimal performance and extend the life of your hair clipper.

7.1 Limpeza das láminas

1. Ensure the clipper is switched off and unplugged from the charger.
2. Retire calquera guía de peite que estea instalada.
3. Use o cepillo de limpeza incluído para eliminar o pelo solto das láminas e do cabezal da cortadora.
4. For a more thorough clean, the blade set can be carefully detached (refer to specific instructions if provided with the product for blade removal). Rinse the detached blades under running water, ensuring the main body of the clipper does not get wet. Dry thoroughly before reattaching.
5. Non use produtos de limpeza ou disolventes abrasivos.

7.2 Lubricar as láminas

To maintain cutting performance, lubricate the blades regularly.

1. After cleaning, apply 1-2 drops of the provided lubricating oil to the blades.
2. Acenda a cortadora de pelo durante uns segundos para que o aceite se distribúa uniformemente.
3. Limpe o exceso de aceite cun pano suave.

8 Solución de problemas

If you encounter issues with your BEPER 40.300 Hair Clipper, refer to the following common problems and solutions:

Se o problema persiste despois de intentar estas solucións, póñase en contacto co servizo de atención ao cliente.

9. Especificacións

• Modelo: 40.300
• Marca: BEPER
• Láminas: Ceramic and Titanium
• Adjustable Cutting Lengths (without comb): 0.8 mm, 1.1 mm, 1.4 mm, 1.7 mm, 2 mm
• Accesos para peine: 3 mm, 6 mm, 9 mm, 12 mm
• Fonte de enerxía: Rechargeable Battery (1 C battery included)
• Tempo de carga: Aproximadamente 8 horas
• Tempo de funcionamento: Ata 60 minutos (completamente cargada)
• Material: Ceramic (blades)
• Dimensións: 27.6 x 20.8 x 6.2 cm (embalaxe)
• Peso: 600 g (Paquete)
• ASIN: B076DC7MGS
• GTIN: 08051772717940

10. Garantía e soporte

This product is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, spare parts, or any inquiries not covered in this manual, please contact BEPER customer service or your local retailer.

Garda o teu recibo de compra como xustificante de compra para reclamacións de garantía.