Lenco L-30BK Belt Drive Turntable Instruction Manual

1. Introdución

This manual provides essential information for the safe and efficient operation of your Lenco L-30BK Belt Drive Turntable. Please read these instructions thoroughly before using the device and retain them for future reference. The Lenco L-30BK is designed for playing vinyl records at 33 and 45 RPM, featuring a built-in preamplifier and USB connectivity for digitizing your vinyl collection.

2. Información de seguridade

• Fonte de enerxía: Asegúrese de que a fonte de alimentación voltage matches the requirements specified on the unit. Use only the provided power adapter.
• Auga e humidade: Non expoña a unidade á choiva, á humidade nin a líquidos que goteen ou salpiquen. Non coloque obxectos cheos de líquido, como vasos, enriba da unidade.
• Ventilación: Asegúrese de que haxa unha ventilación axeitada. Non bloquee as aberturas de ventilación.
• Calor: Manteña a unidade lonxe de fontes de calor como radiadores, rexistros de calor, estufas ou outros aparellos (incluídos amplificadores) que producen calor.
• Limpeza: Desconecte a unidade da toma de corrente antes de limpala. Use un pano suave e seco. Non empregue produtos de limpeza líquidos nin produtos de limpeza en aerosol.
• Servizo: Non intente atender este produto vostede mesmo. Remita todo o servizo a persoal de servizo cualificado.
• Colocación: Place the turntable on a stable, level surface to prevent vibrations and ensure proper playback.

3. Contido do paquete

Please check that all items listed below are included in the package:

• Lenco L-30BK Turntable Unit
• Funda antipolvo
• Prato
• Cinto de transmisión
• Slipmat
• Adaptador de alimentación de CA.
• Cable USB
• Cable de audio RCA
• Manual de instrucións
• Pick-up Needle (pre-installed on cartridge)

4. Produto rematadoview

Familiarize yourself with the components of your Lenco L-30BK turntable.

Figura 4.1: Fronte view of the Lenco L-30BK Turntable with the dust cover open, revealing the main components including the platter, tonearm, and control buttons.

Figura 4.2: Rear panel connections of the Lenco L-30BK, including RCA audio outputs (L/R), USB port, DC12V power input, and the main power switch.

Compoñentes clave:

• Prato: The circular platform where records are placed.
• Arma: Holds the cartridge and stylus, which reads the grooves of the record.
• Cartridge and Stylus: Converts physical vibrations into electrical signals. The L-30BK features a Movable Magnet Sensor (MMC) with an individually replaceable stylus.
• Selector de velocidade: Switch to select between 33 and 45 RPM playback speeds.
• Apagado automático: Automatically stops the platter rotation at the end of a record.
• Funda antipolvo: Protexe o tocadiscos do po cando non se usa.
• Saídas de audio RCA (E/D): For connecting to an external amplifier ou altofalantes activos.
• Porto USB: For connecting to a computer to digitize vinyl records.
• Entrada de alimentación de 12 V CC: Para conectar o adaptador de alimentación.

5. Configuración

5.1 Desembalaxe e colocación

1. Retire con coidado o prato xiratorio da súa embalaxe.
2. Place the unit on a stable, level surface, away from direct sunlight, heat sources, and excessive dust or vibrations.
3. Install the dust cover by aligning its hinges with the slots on the back of the turntable.

Figura 5.1: The Lenco L-30BK Turntable with its protective dust cover closed, ready for placement.

5.2 Instalación do prato e da correa

1. Place the platter onto the turntable spindle.
2. Localiza a correa de transmisión, que normalmente se atopa debaixo do prato ou embalada por separado.
3. Carefully stretch the drive belt around the motor pulley and the inner rim of the platter. Ensure the belt is not twisted.
4. Coloca o tapete antideslizante enriba do prato.

5.3 Conexión de audio

The L-30BK has a built-in preamplifier, allowing direct connection to most audio systems.

• Connect the RCA audio cable (red for right channel, white for left channel) from the AUDIO OUT jacks on the rear of the turntable to the LINE IN or AUX IN jacks on your amplifier ou altofalantes activos.

5.4 Conexión de alimentación

• Connect the DC12V power adapter to the DC12V POWER input on the rear of the turntable.
• Conecta o adaptador de corrente a unha toma de corrente axeitada.

5.5 USB Connection (for Digitization)

• To digitize your vinyl records, connect the USB cable from the USB port on the rear of the turntable to an available USB port on your computer (PC or Mac).

6. Instrucións de funcionamento

6.1 Acendido/Apagado

• Flip the ON/OFF switch on the rear panel to the 'ON' position to power on the turntable.
• Flip the switch to 'OFF' when not in use.

6.2 Reproducindo un disco

1. Coloca un disco no prato, asegurándote de que quede centrado.
2. Select the appropriate speed (33 or 45 RPM) using the speed selector switch. For 45 RPM singles, place the included adapter on the spindle if needed.
3. Levante o brazo usando a palanca de sinalización.
4. Coloque manualmente o brazo sobre o suco inicial desexado do disco.
5. Baixa suavemente o brazo usando a palanca de referencia. O punteiro baixará sobre o disco e comezará a reprodución.
6. At the end of the record, the auto shut-off function will stop the platter rotation. Lift the tonearm and return it to its rest.

Figura 6.1: Proper technique for lowering the tonearm onto a record for playback.

Figura 6.2: Detallado view of the Movable Magnet Sensor (MMC) cartridge and stylus assembly.

6.3 Digitizing Records via USB

The L-30BK allows you to convert your vinyl records into digital audio files usando un ordenador.

1. Connect the turntable to your computer using the supplied USB cable.
2. Download and install audio recording software such as Audacity (available online for free) on your computer.
3. Open the recording software and select the USB Audio Device as the input source.
4. Start recording in the software, then begin playing your record on the turntable as described in section 6.2.
5. Once the record finishes, stop the recording in the software and save your digitized audio file.

7. Mantemento

7.1 Limpeza do prato xiratorio

• Desconecte sempre o prato xiratorio da toma de corrente antes de limpalo.
• Use a soft, dry, lint-free cloth to wipe the cabinet and dust cover.
• Non empregues produtos de limpeza abrasivos, ceras ou disolventes, xa que poden danar o acabado.

7.2 Stylus Care and Replacement

• The stylus is a delicate component. Avoid touching it with your fingers.
• Clean the stylus regularly using a soft brush, gently brushing from back to front.
• The stylus should be replaced after approximately 300-500 hours of playback, or if you notice a degradation in sound quality.
• To replace the stylus, carefully pull the old stylus assembly forward and down from the cartridge. Insert the new stylus assembly by pushing it upwards and backwards into the cartridge until it clicks into place.

8 Solución de problemas

If you encounter problems with your turntable, refer to the following common issues and solutions:

9. Especificacións

10. Garantía e soporte

Lenco products are manufactured to high quality standards. In the event of a defect, your product is covered by the terms of the warranty in your country of purchase. For detailed warranty information, please refer to the warranty card included with your product or visit the official Lenco website. For technical support or service inquiries, please contact Lenco customer service through their official channels.