SONICAKE RockStage Multi-Effects Guitar Pedal Instruction Manual

1. Introdución

Grazas pola compraasing the SONICAKE RockStage Multi-Effects Guitar Pedal. This device is designed to provide essential guitar effects in a compact and user-friendly format, ideal for classic rock musicians. It integrates Distortion, Chorus, Delay, and Reverb effects, along with a built-in cabinet simulator for versatile sound routing.

2. Características clave

One-stop gig solution for classic rock players with all necessary core effects.
Analog Plexi-style distortion for 80s/90s hard rock tones.
Analog BBD-style chorus for warm, dreamy soundscapes.
500ms analog voice delay and high-quality reverb for expansive, spacy tones.
Integrated cabinet simulation for direct connection to PA systems, mixers, or audio interfaces.

3. Que hai na caixa

SONICAKE RockStage Multi-Effects Guitar Pedal (QCE-10)
Cable XLR
Adaptador de alimentación (9 V CC)
Manual de usuario

4. Instrucións de configuración

4.1 Conexión de alimentación

Connect the provided 9V DC power adapter to the 'DC 9V' input jack on the pedal. Ensure the power source meets the pedal's requirements (9V DC, 20mA minimum) to prevent damage.

4.2 Conexións de audio

Entrada de guitarra: Connect your guitar to the 'IN' jack on the right side of the pedal using a standard 1/4-inch instrument cable.
Saída a Amplifier/PA: Connect the 'OUT' jack on the left side of the pedal to your guitar amplifier's input or a PA system/mixer using a standard 1/4-inch instrument cable or the provided XLR cable if using the cabinet simulation.
Saída de auriculares: For silent practice, connect headphones to the 'PHONES' jack.

SONICAKE RockStage pedal with input and output jacks — Figura 1: Máisview of the SONICAKE RockStage pedal, showing input, output, and power connections.

SONICAKE RockStage pedal connected to guitar and ampmáis vivo — Figure 2: The RockStage pedal connected to a guitar and an amplifier, illustrating typical setup.

5. Instrucións de funcionamento

The RockStage pedal features four main effects: Chorus, Rock Amp (Distortion), Delay, and Reverb. Each effect has dedicated footswitches and control knobs.

5.1 Effect Modules

SONICAKE RockStage pedal showing four effects: Chorus, Rock Amp, Delay, Reverb — Figure 3: The four main effects modules of the RockStage pedal: Chorus, Rock Amp, Delay, and Reverb.

Coro: Controls for SPEED and DEPTH to adjust the modulation intensity and rate.
Rock Amp (Distortion): Controls for VOL (Volume), TONE, and GAIN to shape the distortion character and output level.
Atraso: Controls for BLEND (mix), REPEAT (feedback), and TIME to set the delay parameters.
Reverb: A single MIX knob to adjust the wet/dry balance of the reverb effect.

5.2 Activación/Desactivación de efectos

Each effect module has a dedicated footswitch. Press the footswitch to toggle the corresponding effect on or off. The LED indicator above each footswitch will illuminate when the effect is active.

5.3 Cabinet Simulation

The RockStage pedal includes a built-in cabinet simulator. This feature allows you to connect the pedal directly to a PA system, mixer, or audio interface without needing a traditional guitar amplifier. The 'CABINET SIM' switch (OFF/ON) is located between the Reverb and Delay modules.

SONICAKE RockStage pedal with Cabinet Sim switch highlighted — Figure 4: The Cabinet Sim switch, enabling direct connection to PA systems or audio interfaces.

5.4 LED Knobs

The control knobs for each effect feature LED backlighting, which clearly indicates the working status of the effect, especially useful in low-light stage ambientes.

SONICAKE RockStage pedal showing illuminated LED knobs — Figure 5: Illuminated LED knobs provide clear visual feedback on effect status.

5.5 Portabilidade

The compact size and lightweight design of the RockStage pedal make it highly portable and road-ready, fitting easily into gig bags or backpacks.

SONICAKE RockStage pedal fitting into a gig bag — Figure 6: The compact design allows for easy transport and setup.

6. Especificacións

Característica	Detalle
Marca	SONICAKE
Nome do modelo	ROCASTAGE (QCE-10)
Dimensións	40L x 7l x 5.5H cm
Voltage	9 voltios
Ampera	20 millónsampere
Efectos de saída de audio	Overdrive, Distortion, Chorus, Reverb, Delay
Tipo de control	Botón, pomo
Fonte de enerxía	Eléctrico con cable
Interface de hardware	Multiple Audio
Formato de sinal	Analóxico
Tipo de conector	Conector de audio de 3.5 mm
País de Orixe	China

7. Mantemento

Limpeza: Use a soft, dry cloth to clean the pedal. Avoid using abrasive cleaners or solvents.
Almacenamento: Garda o pedal nun lugar fresco e seco, lonxe da luz solar directa e de temperaturas extremas.
Manexo: Evite deixar caer o pedal ou sometelo a impactos fortes.
Potencia: Always disconnect the power adapter when the pedal is not in use or during electrical storms.

8 Solución de problemas

Sen son:
- Asegúrese de que todos os cables estean conectados de forma segura.
- Verify the power adapter is correctly plugged in and providing power.
- Check your guitar and amplifier volume settings.
- Proba con diferentes cables para descartar conexións defectuosas.
Ruído/zunido non desexado:
- Ensure you are using the correct power adapter.
- Proba a usar unha toma de corrente diferente.
- Keep the pedal away from other electronic devices that may cause interference.
Effect Not Activating:
- Press the footswitch firmly. The LED should illuminate.
- Check the knob settings for the specific effect; some effects may be subtle at low settings.

9. Garantía e soporte

The SONICAKE RockStage Multi-Effects Guitar Pedal comes with a 1 anos de garantía do produto desde a data de compra.

For technical support, troubleshooting assistance, or warranty claims, please contact SONICAKE customer service. Refer to the contact information provided on the product packaging or the official SONICAKE websitio.