AEG BEWS 18-230BL-0 230mm Brushless 18V Angle Grinder User Manual

1. Introdución

Thank you for choosing the AEG BEWS 18-230BL-0 230mm Brushless 18V Angle Grinder. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new power tool. Please read this manual thoroughly before operating the tool and keep it for future reference. Proper use and adherence to safety guidelines will ensure optimal performance and extend the life of your angle grinder.

2. Información xeral de seguridade

AVISO: Lea todas as advertencias de seguridade, instrucións, ilustracións e especificacións proporcionadas con esta ferramenta eléctrica. O incumprimento de todas as instrucións que se indican a continuación pode producir descargas eléctricas, incendios e/ou lesións graves.

2.1 Seguridade da zona de traballo

• Manter a zona de traballo limpa e ben iluminada. As zonas desordenadas ou escuras invitan a accidentes.
• Non utilice ferramentas eléctricas en atmosferas explosivas, como en presenza de líquidos, gases ou po inflamables. As ferramentas eléctricas crean faíscas que poden acender o po ou os fumes.
• Manteña os nenos e os espectadores afastados mentres manexa unha ferramenta eléctrica. As distraccións poden facer que perdas o control.

2.2 Seguridade eléctrica

• Os enchufes das ferramentas eléctricas deben coincidir coa toma de corrente. Nunca modifique o enchufe de ningún xeito.
• Evite o contacto corporal con superficies conectadas a terra, como tubos, radiadores, cociñas e frigoríficos. Hai un maior risco de descarga eléctrica se o seu corpo está conectado a terra ou a terra.

2.3 Seguridade persoal

• Usa sempre protección ocular. Usa lentes de seguridade, lentes protectoras ou unha pantalla facial.
• Wear hearing protection when operating power tools for extended periods.
• Vístete correctamente. Non use roupa solta nin xoias. Manteña o cabelo e a roupa lonxe das partes móbiles.
• Mantéñase alerta, observa o que está a facer e use o sentido común ao manexar unha ferramenta eléctrica.

2.4 Angle Grinder Specific Safety

• Always use the guard provided with the tool. Ensure it is securely fastened and positioned for maximum safety.
• Use only grinding or cutting discs that are rated for the speed of the grinder and are of the correct diameter (230mm) and bore size (M14).
• Secure the workpiece. Never hold small pieces in your hand while grinding.
• Be aware of the 'Dead Man' Switch feature, which requires continuous pressure to operate, stopping the tool if released.
• The tool features Anti-Kickback Protection and an Electric Brake for enhanced safety. Familiarize yourself with these functions.
• The Anti-Restart System prevents accidental startup after a power interruption.

3. Produto rematadoview

The AEG BEWS 18-230BL-0 is a powerful 230mm brushless 18V cordless angle grinder designed for demanding cutting and grinding applications. It features a robust brushless motor for extended tool life and efficiency, and a Dual 18V system allowing operation with one or two batteries.

This image shows the AEG BEWS 18-230BL-0 230mm Brushless 18V Angle Grinder from a front-side view, highlighting its main body, disc guard, and auxiliary handle. The tool is orange and black.

3.1 Características principais

• 18V Brushless Motor: Ofrece maior potencia, eficiencia e maior vida útil das ferramentas.
• Dual 18V System: Operates with either one or two 18V batteries for flexible power options.
• 'Dead Man' Switch: Enhances user safety by stopping the tool immediately upon release.
• Anti-Kickback Protection: Reduces the risk of sudden tool movement if the disc binds.
• Freo eléctrico: Quickly stops the disc for added safety and productivity.
• Anti-Restart System: Prevents unintentional startup after a battery change or power interruption.
• Inicio suave: Ensures a smooth and controlled startup, reducing jerk.
• Rotatable Anti-Vibration Rear Handle with Soft Grip: Ofrece confort e control durante o uso prolongado.
• 3-Position Anti-Vibration Auxiliary Handle: Offers versatile and comfortable grip options.

4. Configuración

4.1 Instalación da batería

This tool is supplied without batteries or charger. Ensure you use compatible AEG 18V Lithium-ion batteries. To install, slide the battery pack(s) into the battery port(s) until it clicks into place. To remove, press the release button and slide the battery out.

4.2 Colocación da asa auxiliar

The auxiliary handle can be screwed into one of the three designated positions on the gear housing. Choose the position that provides the best control and comfort for your application. Tighten securely by hand.

4.3 Mounting and Adjusting the Guard

The guard is essential for safety. Ensure it is correctly fitted and adjusted to protect against sparks and debris. Loosen the guard clamping screw, position the guard to cover the maximum amount of the disc exposed to the operator, and then tighten the screw firmly.

4.4 Instalación do disco de amolar/cortar

1. Asegúrese de que a ferramenta estea apagada e de que a batería estea retirada.
2. Manteña premido o botón de bloqueo do eixe.
3. Coloque a brida interior no eixo.
4. Position the grinding or cutting disc onto the inner flange, ensuring it sits flat.
5. Screw the outer flange (locking nut) onto the spindle.
6. Use the supplied spanner wrench to firmly tighten the outer flange while holding the spindle lock button. Do not overtighten.

5. Instrucións de funcionamento

5.1 Activación / desactivación

• Para activar: Press and hold the 'Dead Man' switch. The tool will start with a soft start.
• Para apagar: Release the 'Dead Man' switch. The electric brake will quickly stop the disc.

5.2 Técnicas de traballo

• Always hold the angle grinder firmly with both hands, using the main handle and the auxiliary handle.
• Asegúrese de que a peza de traballo estea firmemente clampsuxeitos ou suxeitos para evitar movemento durante o funcionamento.
• For grinding, apply light pressure and move the tool evenly across the surface. Avoid excessive pressure, which can overload the tool and damage the disc.
• For cutting, use a cutting disc and make straight, controlled cuts. Do not use grinding discs for cutting.
• Allow the tool to reach full speed before engaging the workpiece.
• Be mindful of sparks and debris. Direct them away from yourself and others.

6. Mantemento

Un mantemento regular garante a lonxevidade e o funcionamento seguro da súa rebarbadora angular.

6.1 Limpeza

• Retire sempre a batería antes da limpeza.
• Keep the ventilation openings clear to prevent overheating. Use compressed air to blow out dust from the motor housing.
• Clean the tool housing with a soft, damp pano. Non use produtos químicos agresivos ou produtos de limpeza abrasivos.

6.2 Inspección

• Regularly inspect the power tool for any signs of damage, such as cracks in the housing, damaged cables, or loose components.
• Check the grinding/cutting discs for wear or damage before each use. Replace damaged discs immediately.
• Asegúrese de que a protección estea ben fixada e non estea danada.

6.3 Almacenamento

Store the tool in a dry, secure place out of reach of children. Remove the battery pack before storing for extended periods.

7 Solución de problemas

If you encounter problems with your angle grinder, refer to the following common issues and solutions:

If the problem persists after attempting these solutions, please contact AEG customer service or an authorized service center.

8. Especificacións

9. Garantía e soporte

9.1 Información da garantía

This AEG BEWS 18-230BL-0 Angle Grinder comes with a 1 ano de garantía desde a data de compra. Conserve o comprobante de compra para reclamacións de garantía. A garantía cobre defectos de materiais e fabricación en condicións de uso normal.

9.2 Dispoñibilidade de pezas de reposto

Spare parts for this product are available in the EU for a period of 5 anos from the date of manufacture. For genuine spare parts, please contact an authorized AEG service center.

9.3 Atención ao cliente

For technical assistance, service, or warranty inquiries, please contact your local AEG customer service representative or visit the official AEG website for support contact details. Always provide the model number (BEWS18-230BL-0) and serial number (if applicable) when seeking support.