1. Produto rematadoview
The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.
Características principais:
- Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
- Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
- Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
- Capacidade de corte: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
- Garda de seguridade: A protective guard for the cutting disc ensures user safety from chips and dust.
2. Instrucións de seguridade
Lea e comprenda sempre todos os avisos de seguridade, instrucións, ilustracións e especificacións que se inclúen con esta ferramenta eléctrica. O incumprimento de todas as instrucións que se indican a continuación pode provocar descargas eléctricas, incendios ou lesións graves.
Avisos xerais de seguridade:
- Usar equipos de protección individual (EPI) axeitados, incluíndo lentes de seguridade, protección auditiva e luvas.
- Asegúrate de que a área de traballo estea limpa, ben iluminada e libre de obstáculos.
- Manteña os nenos e os espectadores afastados mentres manexa a ferramenta.
- Never operate the tool if the power cord or plug is damaged.
- Always disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
- Use a folla correcta para o material a cortar.
- Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.
3. Compoñentes Overview
Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:
- Cutting Table (Stainless Steel)
- Diamond Cutting Disc (180 mm diameter)
- Unidade motora
- Depósito de auga
- Cutting Guide with Scale
- Angle Stop (-45° to +45°)
- Protector de follas
- Interruptor On/Off
- Asa de transporte
Figura 1: Máisview of the Einhell TC-TC 800 Tile Cutter with its main parts.
4. Configuración
Before operating the tile cutter, ensure proper setup for safety and optimal performance.
4.1 Desembalaxe e inspección
- Retire coidadosamente todos os compoñentes da embalaxe.
- Inspect the tool for any signs of damage during transit. Do not operate if damaged.
- Asegúrate de que estean presentes todos os compoñentes listados.
4.2 Encher o depósito de auga
The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.
- Locate the water reservoir beneath the cutting table.
- Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
- Regularly check the water level during operation and refill as needed.
Figure 2: Filling the water reservoir for wet cutting.
4.3 Adjusting the Cutting Guide and Angle Stop
For accurate cuts, adjust the cutting guide and angle stop as required.
- The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
- For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.
Figure 3: Adjustable angle stop for miter cuts.
5. Instrucións de funcionamento
Follow these steps for safe and effective tile cutting.
5.1 Acendido/Apagado
- Connect the tile cutter to a suitable power outlet (240 Volts).
- To turn on, press the green 'ON' button.
- To turn off, press the red 'OFF' button.
Figure 4: Power switch for turning the machine on and off.
5.2 Facer un corte
- Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
- Ensure the water pump is active and water is flowing to the blade.
- Turn on the tile cutter.
- Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
- Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.
Figure 5: Demonstrating a tile being cut with the machine.
5.3 Official Product Video: How to Use
Video 1: This video demonstrates the basic operation and usage of a tile cutter, including setup and cutting techniques.
6. Mantemento
Regular maintenance ensures the longevity and performance of your tile cutter.
6.1 Limpeza do depósito de auga
After each use, clean the water reservoir to prevent buildup of tile dust and debris.
- Desconecte a fonte de alimentación.
- Remove the cutting table or access panel to reach the reservoir.
- Empty the dirty water and thoroughly clean the reservoir with fresh water.
- Volve montar os compoñentes.
6.2 Substitución da folla
Replace the diamond cutting disc when it becomes dull or damaged.
- Asegúrate de que a ferramenta estea desconectada.
- Use the provided tool to loosen the blade retaining nut.
- Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
- Tighten the retaining nut securely.
7 Solución de problemas
This section addresses common issues you might encounter with your tile cutter.
| Problema | Causa posible | Solución |
|---|---|---|
| Poor cut quality (chipping, uneven edges) | Dull or incorrect blade; insufficient water cooling; pushing too fast. | Replace blade with a suitable diamond disc; ensure water reservoir is full and pump is working; reduce feeding speed. |
| Water overflow from table | Water channels blocked; reservoir too full; uneven surface. | Clean water channels; do not overfill reservoir; ensure the machine is on a level surface. |
| A máquina non arranca | Sen subministración de enerxía; interruptor avariado; problema co motor. | Check power connection and circuit breaker; test the power outlet; contact customer support if switch or motor is faulty. |
| Rusted screws/components | Lack of proper drying/maintenance after wet use. | Regularly clean and dry all metal components after use. Apply a rust preventative lubricant (e.g., WD-40) to screws and moving parts. |
8. Especificacións
| Característica | Detalle |
|---|---|
| Marca | Einhell |
| Número de modelo | 4301185 |
| Poder | 800 vatios |
| Voltage | 240 voltios |
| Velocidade | 2950 RPM |
| Diamond Cutting Disc Diameter | 180 mm |
| Max. Cutting Height (90°) | 34 mm |
| Max. Cutting Height (45°) | 14 mm |
| Angle of Cut | 45 graos |
| Table Dimensions (L x W) | 39.6 cm x 38.5 cm |
| Dimensións do produto (L x W x H) | 39.6l. x 38.5an. x 25.5al. centimeters |
| Peso do produto | 9.1 quilogramos |
| Fonte de enerxía | Eléctrico con cable |
| Características especiais | Adjustable angle stop, parallel stop with scale |
9. Garantía e soporte
9.1 Información da garantía
This Einhell product comes with a 2 ano de garantía limitadaGarde o comprobante de compra para calquera reclamación de garantía.
9.2 Atención ao cliente
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell websitio web ou na embalaxe do produto para obter a información de contacto máis actualizada.