1. Introdución
Thank you for choosing the ANSMANN Powerline 4 Smart battery charger. This intelligent charger is designed to safely and efficiently recharge your NiMH AA (Mignon HR6) and AAA (Micro HR03) rechargeable batteries. Please read this manual carefully before first use to ensure proper operation and to maximize the lifespan of your batteries and charger.
2. Información de seguridade
- Use this charger only for NiMH AA and AAA rechargeable batteries. Do not attempt to charge other battery types (e.g., alkaline, lithium) as this may cause explosion, leakage, or personal injury.
- Non expoñas o cargador á choiva, á humidade nin a temperaturas extremas.
- Ensure proper polarity when inserting batteries. The charger features reverse polarity protection.
- Non desmontes nin modifiques o cargador. Encarga calquera mantemento a persoal cualificado.
- Desconecte o cargador da toma de corrente cando non o use ou antes de limpalo.
- The charger incorporates an automatic shutdown (-dU) and an 8-hour safety timer to prevent overcharging.
- Manter fóra do alcance dos nenos.
For detailed safety information, please refer to the safety document provided with your product.
3. Produto rematadoview
3.1 Características principais
- Intelligent charging: Automatically and individually charges 1 to 4 NiMH AA/AAA batteries.
- Automatic charge termination: Stops charging when batteries reach 100% capacity.
- Trickle charge: Maintains full charge once batteries are charged.
- Defective battery detection: Identifies and signals faulty rechargeable batteries.
- Accu Repair mode: Revives deeply discharged or 'tired' rechargeable batteries.
- Safety features: Reverse polarity protection, -dU automatic shutdown, 8-hour safety timer.
3.2 Contido do paquete
- 1x ANSMANN Powerline 4 Smart Battery Charger with integrated power supply (100-240V)
- 1 x Manual de usuario
3.3 Compoñentes do produto
The charger features four individual charging slots for AA or AAA batteries and LED indicators above each slot to show the charging status.
4. Configuración
4.1 Conexión do cargador
- Ensure the charger is clean and dry before connecting to power.
- Plug the integrated power plug of the ANSMANN Powerline 4 Smart charger directly into a standard wall power outlet (100-240V AC).
4.2 Inserción das baterías
- Open the battery compartment if applicable, or simply slide batteries into the slots.
- Insert 1 to 4 NiMH AA (Mignon HR6) or AAA (Micro HR03) rechargeable batteries into the charging slots.
- Ensure correct polarity (+ and -) by matching the battery terminals with the markings on the charger slots. The charger has reverse polarity protection.
5. Instrucións de funcionamento
5.1 Proceso de carga
Once batteries are correctly inserted and the charger is plugged in, the charging process begins automatically for each individual battery. The LED indicator above each slot will show the charging status:
- Verde intermitente: Pre-charge mode (initial phase of charging).
- Vermello: Fast charge mode (main charging phase).
- Verde: Ready / Trickle charge mode (battery is fully charged and maintained).
- Vermello intermitente: Defective battery detected.
The charging time for a 1000 mAh battery is approximately 2 hours and 30 minutes. For a 2500 mAh battery, it is approximately 6 hours.
5.2 Accu Repair Mode
The Powerline 4 Smart features an 'Accu Repair' function. This mode attempts to reactivate deeply discharged or 'tired' NiMH batteries, potentially extending their usable life. This process is automatic and integrated into the charging cycle.
5.3 Defective Battery Detection
The charger automatically detects defective batteries. If a faulty battery is inserted, the corresponding LED indicator will flash red, and the charging process for that specific slot will not proceed. Remove and dispose of defective batteries according to local regulations.
6. Mantemento
6.1 Limpeza
- Desconecte sempre o cargador da toma de corrente antes de limpalo.
- Use a dry, soft cloth to wipe the exterior of the charger.
- Non empregue produtos de limpeza líquidos, solventes nin materiais abrasivos.
- Ensure no dust or debris accumulates in the charging slots.
6.2 Almacenamento
- Garda o cargador nun lugar fresco e seco, lonxe da luz solar directa e de temperaturas extremas.
- When not in use for extended periods, unplug the charger.
7 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Charger not starting / No LED activity | No power supply; Charger not properly plugged in. | Check power outlet; Ensure charger is securely plugged in. |
| LED vermello parpadeante | Defective battery detected. | Remove the battery. If it continues to flash red with other batteries, the charger may be faulty. |
| A batería non se carga completamente | Battery is old or damaged; Incorrect battery type. | Try the 'Accu Repair' function (automatic). Replace old batteries. Ensure only NiMH AA/AAA batteries are used. |
| O cargador quéntase durante o funcionamento | Normal during charging. | Isto é normal. Se se quenta excesivamente ou emite fume/cheiro, desconécteo inmediatamente e póñase en contacto co servizo de asistencia. |
8. Especificacións
| Característica | Especificación |
|---|---|
| Marca | Ansmann |
| Número de modelo | 1001-0049 |
| Tipos de batería compatibles | NiMH AA/Mignon/HR6 and AAA/Micro/HR03 |
| Número de ranuras de carga | 4 |
| Vol. De entradatage | 100-240 voltios (CA) |
| Vol. De saídatage | 5 voltios (DC) |
| Intensidade actual | 500 mA |
| Typical Charging Time (1000 mAh) | 2.5 horas |
| Product Dimensions (P x L x H) | 67P x 12l x 77H millimeters (Note: The provided dimensions 67P x 12l x 77H mm seem inconsistent with the image 119mm H x 67mm W x 36mm D. Using image dimensions for clarity.) |
| Dimensións do produto (altura x ancho x profundidade) | 119 mm x 67 mm x 36 mm |
| Cor | Negro |
| Normas de seguridade | Certificado TÜV |
| País de Orixe | China |
9. Garantía e soporte
9.1 Información da garantía
The ANSMANN Powerline 4 Smart charger comes with a 3-year warranty. Please retain your proof of purchase for warranty claims. Spare parts availability in the EU is also 3 years.
9.2 Atención ao cliente
For any questions, technical assistance, or warranty claims, please contact ANSMANN customer support through their official website or the retailer where you purchased the product. Do not attempt to repair the device yourself.