Utilitech 110-Degree 1-Head Bronze Solar Powered Integrated LED Motion-Activated Flood Light with Timer User Manual

Introdución

This manual provides detailed instructions for the installation, operation, and maintenance of your Utilitech 110-Degree 1-Head Bronze Solar Powered Integrated LED Motion-Activated Flood Light with Timer. This solar-powered floodlight is designed for outdoor security lighting, offering a convenient and energy-efficient solution for illuminating areas such as front yards, backyards, gardens, pathways, and porches. It features an advanced amorphous solar panel for green energy utilization, a dusk-to-dawn sensor to prevent daytime illumination, and a selectable timer for 1 or 3 minutes of light duration.

Información de seguridade

Lea e comprenda todas as instrucións antes de instalar ou operar este produto. O incumprimento destas instrucións pode provocar descargas eléctricas, incendios ou outros perigos que poderían causar danos materiais ou lesións persoais.

• Ensure the solar panel is installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure optimal battery charging.
• Do not attempt to disassemble or modify the product. There are no user-serviceable parts inside except for battery replacement.
• Keep the solar panel and light fixture clean from dirt, snow, or debris to maintain charging efficiency and light output.
• Este produto está deseñado para uso no exterior e é resistente á auga. Non obstante, evite mergullalo na auga.
• When replacing batteries, use only the specified type and rating (two 1000 mAh 18500 lithium phosphate solar rechargeable batteries).
• Desfágase das baterías vellas segundo a normativa local.

Contido do paquete

Verifique que estean presentes todos os compoñentes antes de comezar a instalación.

• 1x LED Flood Light Unit with Motion Sensor
• 1x Solar Panel with 20-ft Cord
• Ferraxes de montaxe (parafusos, ancoraxes)
• 2x 1000 mAh 18500 Lithium Phosphate Solar Rechargeable Batteries (pre-installed or included separately)

Image: The complete Utilitech solar flood light system, showing the LED light unit with motion sensor, the separate solar panel, and the connecting cord.

Características do produto

• Alimentación solar: Easy installation without electrical wiring.
• Activado por movemento: 110-degree detection range up to 40 feet.
• LED integrado: Maintenance-free LED technology with 350 lumens brightness and 5000K cool white light.
• Sensor de solpor a amencer: Automatically prevents illumination during daylight hours.
• Temporizador axustable: Selectable light duration of 1 or 3 minutes.
• Axustable Lamp Xefe: Allows for precise light direction.
• Fonte de enerxía: Two 1000 mAh 18500 lithium phosphate solar rechargeable batteries (included).
• Instalación: Suitable for wall and eave mount.
• Lonxitude do cable: 20-ft cord connecting the solar panel to the light unit.

Configuración e instalación

Follow these steps for proper installation of your solar flood light.

1. Choose a Location for the Solar Panel: Select an outdoor location for the solar panel that receives at least 6-8 hours of direct sunlight daily. Avoid areas shaded by trees, buildings, or other obstructions. The 20-ft cord allows flexibility in placing the solar panel away from the light unit for optimal sun exposure.
   

   Imaxe: Primeiro plano view of the solar panel with its mounting base and connecting cord.

2. Montar o panel solar: Use the provided mounting hardware to securely attach the solar panel to a wall or eave. Ensure the panel is angled to maximize sun exposure.
3. Choose a Location for the Flood Light: Select a desired location for the flood light unit. This can be a wall or eave. Consider the 110-degree motion detection range and the area you wish to illuminate.
   

   Image: The Utilitech flood light unit, showing the LED light head and the motion sensor at the bottom.

4. Mount the Flood Light: Securely attach the flood light unit to the chosen surface using the appropriate mounting hardware.
5. Connect the Solar Panel to the Light Unit: Plug the 20-ft cord from the solar panel into the designated port on the flood light unit. Ensure a secure connection.
   

   Image: An installed Utilitech solar flood light and solar panel on a wall, demonstrating the connection.

6. Axuste o Lamp Head and Motion Sensor: Loosen the adjustment screws on the lamp head and motion sensor to position them for optimal coverage. Tighten the screws once adjusted.
7. Carga inicial: Allow the solar panel to charge the batteries for at least 24-48 hours in direct sunlight before initial use to ensure full battery capacity.

Instrucións de funcionamento

Your Utilitech solar flood light is designed for automatic operation.

• Operación automática: The integrated dusk-to-dawn sensor will detect ambient light levels. The flood light will only activate when motion is detected during nighttime hours.
• Detección de movemento: The motion sensor has a 110-degree detection angle and can detect movement up to 40 feet away. Position the sensor to cover the desired area.
• Configuración do temporizador: Locate the timer switch on the flood light unit. You can select between a 1-minute or 3-minute illumination duration after motion is detected.
• Adjustable Detection Sensitivity: The motion sensor sensitivity can be adjusted. Refer to the markings on the sensor for specific settings (if available on your model).

Mantemento

Un mantemento regular garante un rendemento óptimo e unha maior duración do seu foco de inundación.

• Limpeza: Periodically clean the solar panel and the LED light lens with a soft, damp cloth to remove dirt, dust, or debris. A clean solar panel ensures efficient charging.
• Substitución da batería: The flood light is powered by two 1000 mAh 18500 lithium phosphate solar rechargeable batteries. If the light output diminishes significantly or the light stops working, the batteries may need replacement. Replacement batteries (Lowe's item # 605119) are sold separately.

  Para substituír as baterías:

  1. Carefully open the battery compartment on the flood light unit.
  2. Retire as pilas antigas e bóteas correctamente.
  3. Insert new 18500 lithium phosphate solar rechargeable batteries, ensuring correct polarity.
  4. Pecha de forma segura o compartimento da batería.

• Tecnoloxía LED: The integrated LED technology is maintenance-free and does not require bulb replacement.

Resolución de problemas

If your flood light is not functioning as expected, refer to the following common issues and solutions.

Especificacións

Garantía e Soporte

For warranty information or technical support, please refer to the product packaging or contact Utilitech customer service directly. Keep your purchase receipt for warranty claims.

Replacement batteries (Lowe's item # 605119) are available for purchase separately.