1. Introdución
This manual provides instructions for the installation, operation, and maintenance of the BougeRV EV Charger Holster Dock. This product is designed to securely hold your Electric Vehicle (EV) charger connector when not in use, ensuring a tidy and organized charging area.
The holster is constructed from durable, injection-molded material and is compatible with all SAE J1772 type connectors. Its design facilitates easy insertion and removal of the charger nozzle.
Figure 1: BougeRV EV Charger Holster Dock with an EV charger connector securely in place.
2. Contido do paquete
- 1 x BougeRV EV Charger Holster Dock
- 4 x parafusos de montaxe
Figure 2: The BougeRV EV Charger Holster Dock and included mounting screws.
3. Configuración e instalación
The BougeRV EV Charger Holster Dock is designed for quick and simple installation, suitable for both indoor and outdoor environments. Ensure the mounting surface is stable and appropriate for drilling.
Ferramentas necesarias (non incluídas):
- Broca
- Drill bit appropriate for mounting surface and screw size
- Desaparafusador (recoméndase o de cabeza Phillips)
- Lapis ou rotulador
Pasos de instalación:
- Seleccionar localización: Choose a convenient location near your EV charging station. Ensure there is enough space for the charger cable and that the holster will not obstruct pathways.
- Marcar puntos de perforación: Place the holster against the desired mounting surface. Use a pencil or marker to mark the four screw hole locations.
- Perforar buratos piloto: Using an appropriate drill bit, carefully drill pilot holes at the marked locations. The depth and diameter of the pilot holes should be suitable for the provided mounting screws and the material of your mounting surface.
- Montar a funda: Align the holster with the pilot holes. Insert the four provided mounting screws and tighten them securely with a screwdriver. Do not overtighten to avoid damaging the holster or the mounting surface.
Figura 3: detallada views of the holster's mounting points and construction.
4. Instrucións de funcionamento
Using the BougeRV EV Charger Holster Dock is straightforward.
- Storing the Charger: When your EV charger is not in use, align the SAE J1772 connector nozzle with the opening of the holster. Gently push the connector into the holster until it clicks or feels securely seated. The design allows for easy engagement.
- Extracción do cargador: To retrieve your charger, simply pull the SAE J1772 connector firmly out of the holster.
Figure 4: Demonstrating the insertion of an SAE J1772 connector into the holster.
5. Mantemento
The BougeRV EV Charger Holster Dock requires minimal maintenance to ensure its longevity and proper function.
- Limpeza: Periodically wipe the holster with a soft, damp cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners, as these may damage the material.
- Inspección: Regularly inspect the holster for any signs of damage, such as cracks or loose mounting screws. If any damage is observed, ensure the holster is still securely mounted and functioning correctly.
6 Solución de problemas
If you encounter any issues with your BougeRV EV Charger Holster Dock, refer to the following common problems and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| Charger connector does not fit or is loose. | Incorrect connector type or improper insertion. | Ensure your EV charger uses an SAE J1772 connector. Verify the connector is aligned correctly before inserting. |
| Holster feels unstable after installation. | Loose mounting screws or unsuitable mounting surface. | Check and tighten all mounting screws. Ensure the holster is mounted on a solid, appropriate surface. |
7. Especificacións
| Característica | Detalle |
|---|---|
| Marca | BougerRV |
| Modelo | EV Charger Holster Dock |
| Compatibilidade | SAE J1772 EV Charger Connectors |
| Material | Injection-molded plastic |
| Cor | Black (EV charger holder) |
| Número de portos | 1 |
| Dimensións (aproximadas) | 2.83 inches (width) x 2.83 inches (height) x 0.31 inches (thickness of mounting plate) |
| ASIN | B07F119GBF |
Figure 5: Approximate dimensions of the BougeRV EV Charger Holster Dock.
8. Garantía e soporte
Specific warranty information for the BougeRV EV Charger Holster Dock is not provided within this manual. For details regarding warranty coverage or technical support, please refer to the product packaging, the official BougeRV website, or contact BougeRV customer service directly.
Fabricante: BougerRV
9. Recursos de vídeo
Non hai vídeos oficiais de produtos do vendedor dispoñibles para inserir neste manual.