TSL Platinum Professional Level 8 Channel NVR – 4K User Manual

1. Introdución

This manual provides instructions for the installation, operation, and maintenance of your TSL Platinum Professional Level 8 Channel NVR (Network Video Recorder), Model LTN8708Q P8. This NVR supports up to 8 channels of IP camera input, with resolutions up to 8 Megapixels, and utilizes H.265/H.265+/H.264/H.264 Zip+/MPEG4 video formats for efficient storage and high-quality video. Please read this manual thoroughly before operating the device to ensure proper use and to prevent damage.

Contido do paquete

Verifique que todos os elementos que se indican a continuación estean incluídos no seu paquete. Se falta algún elemento ou está danado, póñase en contacto co seu provedor.

• TSL Platinum Professional Level 8 Channel NVR Unit
• Adaptador de alimentación
• Rato USB
• Control remoto
• SATA Cables (for hard drive connection)
• Mounting Screws (for hard drive)
• Guía de inicio rápido

Figura 1: NVR Package Contents. This image displays the power adapter, remote control, SATA data and power cables, and mounting screws that are typically included with the NVR unit.

2. Información de seguridade

Observe as seguintes precaucións de seguridade para evitar lesións ou danos no dispositivo:

• Asegúrese de que a fonte de alimentación voltage is correct before connecting the NVR.
• Do not expose the NVR to water or moisture.
• Avoid placing the NVR in direct sunlight or near heat sources.
• Install the NVR in a well-ventilated area to prevent overheating.
• Do not open the NVR casing. Encomende todo o mantemento a persoal cualificado.
• Use só accesorios especificados polo fabricante.

3. Produto rematadoview

NVR Front and Rear Panels

Figura 2: NVR Front and Rear Panels. The top image shows the front panel with power, status, and Tx/Rx indicators, along with control buttons and a USB port. The bottom image displays the rear panel with PoE ports, audio in/out, LAN, HDMI, VGA, and power input.

Front Panel Indicators and Controls:

• POTENCIA: Indicador de potencia.
• ESTADO: Indicador de estado do sistema.
• Tx/Rx: Data transmission/reception indicator.
• Botóns de control: For menu navigation and system control.
• Porto USB: For mouse or USB storage device connection.

Rear Panel Interfaces:

• PoE Ports (8 channels): Connect IP cameras directly for power and data.
• ENTRADA/SAÍDA DE AUDIO: Para dispositivos de son externos.
• Porto LAN: Connect to your network router/switch.
• Saída HDMI: Connect to a monitor for high-resolution video output (up to 4K).
• Saída VGA: Connect to a monitor for video output (up to 1080p).
• Power Input (48V): Conecte o adaptador de corrente fornecido.
• Interruptor de alimentación: To turn the NVR on/off.

Características clave

• 8 channel PoE IP camera input, supporting cameras up to 8MP with a maximum incoming bandwidth of 80Mbps.
• H.265+ / H.265 / H.264+ / H.264 video formats for efficient compression.
• 2x SATA interfaces for hard drives (hard drives are not included).
• HDMI / VGA simultaneous output. HDMI output up to 4K@30Hz, VGA output up to 1080p@60Hz.
• Apoio en directo view, storage, and playback of connected cameras.

4. Configuración

4.1 Instalación do disco duro (opcional)

The NVR requires a hard drive for video recording. Hard drives are not included and must be purchased separately. The NVR supports up to two SATA hard drives.

1. Desenrosque e retire a tapa superior do NVR.
2. Connect the SATA data cable and power cable to the hard drive and the corresponding ports on the NVR motherboard.
3. Fixe o disco duro ao chasis do NVR cos parafusos fornecidos.
4. Volva colocar a tapa superior e asegúreaa con parafusos.

4.2 Conexión de cámaras

Connect your IP cameras to the PoE ports on the rear panel of the NVR using Ethernet cables. The PoE ports provide both power and data connection to compatible cameras.

Figura 3: Camera Wiring Compatibility. This image illustrates that a standard network cable (Ethernet/PoE) is compatible for connecting cameras to this NVR, while traditional DC power and BNC video cables are not compatible.

4.3 Connecting to a Display and Network

• Conecte un monitor ao porto de saída HDMI ou VGA do NVR.
• Connect a USB mouse to one of the NVR's USB ports.
• Connect the NVR's LAN port to your network router or switch using an Ethernet cable for network access and remote viewcapacidades de ing.

4.4 Acendido

Connect the provided power adapter to the NVR's 48V power input and then plug it into a power outlet. Flip the power switch on the rear panel to the ON position. The NVR will boot up, and you should see the boot screen on your connected monitor.

5. Instrucións de funcionamento

5.1 Asistente de configuración inicial

Upon first boot, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up language, date/time, network settings, and hard drive initialization.

5.2 En directo View

After initial setup, the NVR will display the live view de cámaras conectadas. Podes cambiar entre unha soa cámara view e grella multicámara view using the on-screen controls or the remote control.

5.3 Gravación

The NVR supports continuous recording, scheduled recording, and motion-triggered recording. Configure recording schedules and settings via the main menu. Ensure your hard drive is initialized and healthy for recording.

5.4 Reprodución

Acceso gravado footage through the playback menu. You can search for recordings by date, time, and event type. Use the playback controls to fast forward, rewind, and pause.

5.5 Acceso á rede e remoto Viewing

Once the NVR is connected to your network, you can access it remotely via a web browser or a dedicated mobile application. Refer to the NVR's network settings for IP address and port information. Ensure proper port forwarding is configured on your router for external access.

6. Mantemento

6.1 Xestión do disco duro

Regularly check the status of your hard drives through the NVR's menu. Format hard drives periodically if necessary, or configure them for overwrite mode to ensure continuous recording.

6.2 Actualizacións de firmware

Consulte o do fabricante website for available firmware updates. Keeping your NVR's firmware up-to-date ensures optimal performance and security. Follow the provided instructions carefully when performing updates.

6.3 Limpeza

Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust and obstructions.

7 Solución de problemas

• Sen enerxía:

  Ensure the power adapter is securely connected to both the NVR and a working power outlet. Check the power switch on the rear panel.
• Sen saída de vídeo:

  Verify the HDMI/VGA cable is securely connected to both the NVR and the monitor. Ensure the monitor is powered on and set to the correct input source.

• Cámaras que non mostran:

  Check that cameras are properly connected to the PoE ports. Ensure cameras are powered on and compatible with the NVR. Verify network settings for IP cameras.

• Sen gravación:

  Confirm that a hard drive is installed and properly initialized. Check recording schedules and ensure there is sufficient disk space. Verify camera connections.
• Problemas de acceso remoto:

  Ensure the NVR is connected to the network and has a valid IP address. Check router settings for port forwarding and firewall rules. Verify mobile app or web configuración do navegador.

8. Especificacións

9. Garantía e soporte

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official TSL websitio. Garde o recibo da compra como xustificante de compra para reclamacións de garantía.

For further assistance, you may contact your local distributor or the manufacturer's customer service department.