TOTO Neorest AH Elongated Bidet Seat Instruction Manual

Introdución

This manual provides detailed instructions for the safe installation, operation, and maintenance of your TOTO Neorest AH Elongated Bidet Seat, Model SN989M. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.

Figure 1: TOTO Neorest AH Elongated Bidet Seat, Model SN989M, shown in Cotton finish. This image displays the sleek, closed-front design of the bidet seat.

Información importante de seguridade

Observe all safety precautions to prevent injury or property damage. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Asegúrese de desconectar a fonte de alimentación antes de realizar calquera instalación ou mantemento.
• This product must be installed by a qualified plumber or technician in accordance with local plumbing and electrical codes.
• Do not immerse the product in water or spray water directly onto electrical components.
• Do not attempt to repair or modify the product yourself. Contact qualified service personnel for assistance.
• Keep children away from the product during operation and maintenance.
• Use only genuine TOTO replacement parts and accessories.

Contido do paquete

Verifique que todos os compoñentes estean presentes e sen danos antes de comezar a instalación.

• TOTO Neorest AH Elongated Bidet Seat (Main Unit)
• Mounting Hardware Kit (bolts, washers, nuts)
• Mangueira de abastecemento de auga
• T-Connector for Water Supply
• Remote Control with Wall Mount and Batteries
• Manual de usuario (este documento)

Configuración e instalación

Professional installation is recommended for optimal performance and to ensure compliance with local codes. Ensure the toilet is clean and dry before installation.

1. Preparación: Turn off the water supply to the toilet and flush to empty the tank. Disconnect the existing water supply hose from the toilet tank.
2. Eliminar o asento existente: Remove the bolts securing the current toilet seat and lid, then remove the old seat.
3. Instalación da placa de montaxe: Position the mounting plate over the toilet bowl holes. Insert the mounting bolts through the plate and toilet holes, securing them from underneath with washers and nuts. Do not overtighten.
4. Install T-Connector: Install the T-connector onto the toilet's fill valve. Reconnect the main water supply hose to one end of the T-connector.
5. Connect Bidet Water Supply: Connect the bidet water supply hose from the T-connector to the water inlet on the side of the bidet seat.
6. Attach Bidet Seat: Slide the TOTO Neorest AH bidet seat onto the mounting plate until it clicks into place.
7. Conectar enerxía: Plug the bidet seat's power cord into a grounded electrical outlet.
8. Restaurar a auga e a electricidade: Slowly turn on the water supply to the toilet. Check for leaks. Turn on the electrical power.
9. Funcións de proba: Perform a test run of all bidet functions as described in the Operating Instructions section.

Instrucións de funcionamento

The TOTO Neorest AH Bidet Seat offers various functions controlled via the remote control. Familiarize yourself with the remote's layout for optimal use.

• Lavado traseiro: Press the "Rear" button for posterior cleansing. Adjust water pressure and temperature as desired.
• Front Wash (Feminine Wash): Press the "Front" button for feminine cleansing. Adjust water pressure and temperature.
• Oscillating/Pulsating Wash: Activate these modes for enhanced cleansing by pressing the respective buttons after initiating a wash cycle.
• Secador de aire quente: After cleansing, press the "Dryer" button to activate the warm air dryer. Adjust air temperature.
• Asento Calefacción: Use the "Seat Temp" button to adjust the seat temperature to your preference.
• Desodorizante: The integrated deodorizer automatically activates to neutralize odors.
• Lavado automático: This model may feature an automatic flushing system. Refer to the specific remote control guide for activation and settings.
• Modo de aforro de enerxía: Activate the energy saver mode to reduce power consumption when the unit is not in use.

Mantemento

Regular cleaning and maintenance will ensure the hygienic operation and longevity of your bidet seat.

• Limpeza exterior: Limpe as superficies exteriores cun suave, damp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads.
• Limpeza de boquillas: The self-cleaning nozzle function activates automatically. For manual cleaning, gently pull out the nozzle and wipe with a soft cloth. Do not use excessive force.
• Mantemento do filtro: Periodically check the water filter (if applicable) for sediment buildup. Clean or replace as recommended in the detailed product guide.
• Descalcificación: In areas with hard water, descaling may be necessary. Consult a professional or the full product manual for descaling procedures.
• Almacenamento a longo prazo: If the unit will not be used for an extended period, drain the water from the unit and disconnect power.

Resolución de problemas

Refer to this section for common issues and their solutions. If the problem persists, contact TOTO customer support.

Especificacións do produto

Garantía e Soporte

The TOTO Neorest AH Elongated Bidet Seat is covered under TOTO's Three Year Limited Warranty. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical assistance, or to purchase replacement parts, please contact TOTO customer support directly. Refer to the official TOTO websitio web ou na documentación da súa compra para obter a información de contacto máis actualizada.

Fabricante: TOTO