1. Introdución
Thank you for choosing the hykolity 4FT Linkable LED Linear Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
This LED linear light is designed for various indoor applications, including commercial offices, living rooms, restaurants, exhibition halls, garages, workshops, and storage areas. It features dimmable functionality, selectable color temperatures (3000K, 4000K, 5000K), and a linkable design for seamless connections.
2. Instrucións de seguridade
AVISO: To prevent electric shock, fire, or injury, always follow basic safety precautions when installing or using this product.
- Turn off the power at the circuit breaker before installation or maintenance.
- A instalación debe ser realizada por un electricista cualificado de acordo con todos os códigos eléctricos nacionais e locais vixentes.
- Este produto está destinado a só para uso interior. Do not use in wet or damp localizacións.
- Ensure the fixture is properly grounded to avoid potential electrical hazards.
- Do not modify the fixture or use it for purposes other than its intended use.
- Avoid looking directly into the LED light source when illuminated, as it may cause eye strain.
- Manteña os materiais de embalaxe lonxe dos nenos.
3. Contido do paquete
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact hykolity customer support.
- LED Architectural Suspended Linear Channel Light Fixture(s)
- Installation Kit (includes flexible cable mounting brackets, screws, wall anchors, and cable hanging system)
Figura 1: Product dimensions and included accessories, including mounting brackets and cables.
4. Configuración e instalación
Importante: Ensure power is OFF at the circuit breaker before starting installation.
- Adjust Cable Mounting Bracket: According to your installation requirements, adjust the linear fixture using the flexible cable mounting bracket. Double-check that the cable holds tightly and securely.
- Quitar a tapa frontal: Use appropriate tools to carefully remove the front cover of the LED linear light.
- Conectar cableado: Connect the AC (Live), N (Neutral), and GND (Ground) wires. If dimming functionality is desired, connect the dimmable wires (purple/gray, minimum 24 AWG, rated min 105°C, 300V). If dimming is not needed, these wires can be capped off. After connecting, put the back cover in place.
- Route AC and Dimmable Wires: Break through the designated hole in the cover using a cutting nipper. Route the AC wire and dimmable wire into the LED linear fixture. If dimming is unnecessary, no connection to the dimmable wire is required.
Figura 2: Detailed installation steps for the hykolity LED Linear Light.
Deseño vinculable
This fixture features a unique linkable design, allowing you to connect up to 10 lights in series seamlessly. Ensure proper electrical connections between linked units.
Figura 3: Illustration of the linkable design and connection process.
5. Instrucións de funcionamento
Encendido/apagado
Once installed and wired correctly, the light can be turned on or off using a standard wall switch connected to the fixture's power supply.
Funcionalidade de atenuación
The hykolity LED Linear Light supports 0-10V dimming, allowing brightness adjustment from 10% to 100%. For optimal performance, use compatible 0-10V dimmers such as Lutron: IP710-40F or Legrand: RH4FBL3P.
Figura 4: Smooth dimming capability of the LED linear light.
Color Temperature Selection (CCT)
This fixture offers three selectable color temperatures: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). The CCT can be adjusted via a switch located on the fixture, allowing customization to suit different environments and preferences.
6. Mantemento
Regular maintenance ensures optimal performance and longevity of your LED linear light.
- Limpeza: Ensure the power is turned off before cleaning. Wipe the fixture with a soft, dry, or slightly damp pano. Non empregue produtos de limpeza abrasivos, solventes nin produtos químicos agresivos, xa que poden danar o acabado ou os compoñentes eléctricos.
- Inspección: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, discontinue use and consult a qualified electrician or contact customer support.
- Substitución da lámpada: This fixture uses integrated LED chips and does not require bulb replacement. The expected lifespan is 50,000 hours.
7 Solución de problemas
If you encounter issues with your hykolity LED Linear Light, refer to the following troubleshooting guide:
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non se acende | Sen fonte de alimentación Cableado incorrecto Interruptor defectuoso | Comprobe o disxuntor e o interruptor de parede. Verify all wire connections (AC, Neutral, Ground) are secure and correct. Test the switch for functionality. |
| A luz parpadea ou se atenúa de xeito inconsistente | Dimmer incompatible Cableado solto Circuito sobrecargado | Ensure a 0-10V compatible dimmer is used (e.g., Lutron IP710-40F, Legrand RH4FBL3P). Check dimmable wire connections. Consult an electrician to check circuit load. |
| Cannot change color temperature (CCT) | CCT switch not set | Locate the CCT selection switch on the fixture and adjust to the desired setting (3000K, 4000K, or 5000K). |
| Multiple linked lights not working | Connection issue between units Exceeded maximum linkable units | Check the physical and electrical connections between all linked fixtures. Ensure no more than 10 units are linked in series. |
8. Especificacións
| Característica | Detalle |
|---|---|
| Marca | hikolidade |
| Nome do modelo | HBLL-FLC03 |
| Dimensións do produto | 44 cm de longo x 2.8 cm de ancho x 2.6 cm de alto |
| Peso do elemento | 5.5 Pounds (per unit) |
| Wattage | 40 vatios |
| Brillo | 4800 lúmenes |
| Temperatura de cor (CCT) | 3000K / 4000K / 5000K seleccionable |
| Regulable | 0-10V Dimmable (10%-100%) |
| Voltage | 100-277 voltios |
| Tipo de fonte de luz | LED |
| Material | Aluminio, Poliéster |
| Tipo de acabado | Pintado |
| Tipo de instalación | Suspendido |
| Uso interior/exterior | Só interior |
| Vida Media | 50,000 horas |
| Índice de reproducción da cor (CRI) | 90.0 |
| Certificacións | ETL & CE Certified |
9. Garantía e soporte
Información da garantía
This hykolity LED Linear Light comes with a Garantía ilimitada de 5 ano against any defects in materials and workmanship from the date of purchase.
Atención ao cliente
For any questions, technical assistance, warranty claims, or support needs, please contact hykolity customer service. Refer to your purchase platform for contact details or visit the official hykolity websitio para as opcións de soporte.