1. Información importante de seguridade
Read all instructions carefully before using the BEEPER FX1L electric scooter. Failure to follow these instructions may result in serious injury or damage to the product.
- Usa sempre casco e equipamento de protección axeitado (rodilleras, cóbados) cando conduzas.
- Cumpre todas as leis e regulamentos locais de tráfico.
- Do not ride in wet conditions, heavy rain, or through puddles. The scooter is not waterproof.
- Ensure the battery is not fully discharged. Maintain at least one bar of charge to prevent battery damage.
- The scooter requires a manual push-off with your foot before the accelerator can engage. This is a safety feature.
- Non exceda o límite de peso máximo de 95 kg.
- Regularly check brakes, tires, and all connections before each ride.
2. Contido do paquete
Carefully unpack your BEEPER FX1L electric scooter and check that all items are present and in good condition. If any items are missing or damaged, contact customer support immediately.
- BEEPER FX1L Electric Scooter
- Cargador de batería
- Manual de usuario
- Assembly Tools (e.g., Allen keys)
Figura 2.1: Contents of the BEEPER FX1L package. Includes the electric scooter, charger, user manual, and necessary tools for initial setup.
3. Produto rematadoview
The BEEPER FX1L is a lightweight and compact electric scooter designed for urban commutes. It features a durable aluminum frame, front suspension, and a dual braking system for enhanced safety.
Características principais:
- Deseño lixeiro: Weighs approximately 8.5 kg for easy portability.
- Plegado compacto: Quick and secure folding mechanism for storage and transport.
- Suspensión dianteira: Provides a smoother ride over uneven surfaces.
- Sistema de freo dual: Electric brake on the handlebar and mechanical foot brake on the rear wheel.
- Iluminación integrada: Front and rear lights for visibility.
Figura 3.1: Handlebar controls including bell, brake, display, and accelerator.
Figura 3.2: The scooter in its folded state, highlighting its compact design.
4. Configuración
4.1 Despregar o escúter
- Coloque o scooter nunha superficie plana.
- Localice o mecanismo de pregamento preto da base da columna de dirección.
- Release the locking lever/pin and carefully lift the steering column until it clicks into place in the upright position.
- Asegúrese de que o mecanismo de bloqueo estea ben encaixado antes do uso.
Figura 4.1: The scooter's folding mechanism, designed for quick and secure operation.
4.2 Carga inicial
Before first use, fully charge the scooter's battery. This typically takes 2 to 3 hours.
- Locate the charging port on the scooter (usually near the battery compartment).
- Conecta o cargador ao porto de carga e, a seguir, conéctao a unha toma de corrente estándar.
- O indicador luminoso do cargador normalmente acenderase en vermello durante a carga e volverase verde cando estea completamente cargado.
- Disconnect the charger once charging is complete. Do not overcharge.
5. Instrucións de funcionamento
5.1 Acendido/Apagado
- Para acender: manteña premido o botón de acendido na pantalla ata que a pantalla se ilumine.
- Para apagar: manteña premido o botón de acendido ata que a pantalla se apague.
5.2 Montar o scooter
- Ensure you are wearing all safety gear.
- Coloca un pé firmemente na plataforma do escúter.
- Push off with your other foot to gain initial momentum (the safety start feature requires this).
- Once moving, gently press the accelerator trigger on the handlebar to engage the motor.
- To brake, release the accelerator and gently squeeze the electric brake lever on the handlebar. For stronger braking, use the mechanical foot brake on the rear wheel.
5.3 Modos de velocidade
The BEEPER FX1L typically offers multiple speed modes:
- Modo 1: Approximately 6 km/h (suitable for pedestrian areas or learning)
- Modo 2: Aproximadamente 15 km/h
- Modo 3: Approximately 20 km/h (maximum speed)
Refer to your display for current speed mode indication and how to switch between modes (usually a short press of the power button or a dedicated mode button).
Figura 5.1: The scooter is capable of reaching speeds up to 20 km/h (23 km/h as per some indications).
6. Mantemento
Un mantemento regular garante a lonxevidade e o funcionamento seguro do seu scooter.
6.1 Coidado coa batería
- Cargue sempre a batería nun lugar seco e ben ventilado.
- Do not allow the battery to fully discharge. Charge it regularly, even if not in use for extended periods (e.g., once a month).
- Evite expor a batería a temperaturas extremas.
6.2 Limpeza
- Limpar o scooter con anunciosamp pano. Non empregues chorros de auga a alta presión nin mergulles o escúter na auga.
- Avoid getting water into the charging port or other electrical components.
6.3 Inspección de pneumáticos e freos
- Regularly check the tires for wear and tear.
- Ensure both the electric and mechanical brakes are functioning correctly before each ride. Adjust if necessary.
7 Solución de problemas
If you encounter issues with your BEEPER FX1L scooter, refer to the following common problems and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| A scooter non se acende | Batería baixa; Conexión solta; Problema co botón de acendido/apagado | Charge the battery; Check all visible connections; Contact support if issue persists. |
| A scooter non acelera | No initial push-off; Accelerator fault; Low battery | Ensure you push off with your foot to activate the safety start; Charge battery; Contact support. |
| Alcance ou velocidade reducidos | Low battery; Overload; Tire pressure (if applicable); Battery degradation | Fully charge battery; Ensure rider weight is within limits; Contact support for battery assessment. |
| Freos non efectivos | Necesítase un axuste do cable de freo; Pastillas de freo desgastadas | Inspect and adjust brake cables; Replace worn brake pads; Contact support for professional service. |
If the problem persists after attempting these solutions, please contact BEEPER customer support.
8. Especificacións
| Característica | Especificación |
|---|---|
| Modelo | FX1L |
| Marca | BEIPER |
| Potencia do motor | 350 W |
| Capacidade da batería | 5 Ah de iones de litio |
| Tamaño da roda | 6 polgadas |
| Peso do produto | 8.5 quilogramos |
| Rango máximo | Up to 10 Kilometers |
| Velocidade máxima | Ata 20 km / h |
| Carga máxima | 95 quilogramos |
| Dimensións despregadas (L x A x H) | 90 x 43 x 97 cm |
| Dimensións dobradas (L x W x H) | 83 x 15 x 28 cm |
| Material do marco | Aluminio |
| Tipo de freo | Electric (front), Mechanical (rear) |
| Tipo de suspensión | Suspensión dianteira |
| Tempo de carga | 2-3 horas |
Figura 8.1: The BEEPER FX1L is a lightweight scooter, weighing 8.5 kg.
Figura 8.2: The scooter offers a range of up to 10 km, suitable for short daily commutes.
9. Garantía e soporte
9.1 Información da garantía
BEEPER offers a comprehensive warranty for your FX1L electric scooter:
- Marco principal: 10 anos
- Electronics & Mechanics: 3 anos
- Batería: 12 meses
This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.
Figura 9.1: BEEPER's commitment to quality, backed by a 10-year warranty on the frame.
Figura 9.2: Assurance of spare parts availability for a minimum of 36 months.
9.2 Atención ao cliente
BEEPER provides after-sales service based in France. For any technical assistance, warranty claims, or spare parts inquiries, please contact our customer support team.
Contact information can typically be found on the BEEPER official websitio web ou na documentación da súa compra.
Figura 9.3: BEEPER's after-sales service is based in France.