1. Produto rematadoview
The BSEED Surge Protector Outlet is designed to safeguard your home appliances from electrical damage caused by voltage fluctuations, power surges, and brownouts. This adjustable voltage regulator provides reliable protection for 220V systems, with a maximum capacity of 4400W. It features LED indicators for status monitoring and a built-in delay function to ensure stable power re-establishment after interruptions.
Figura 1: Fronte view of the BSEED 220V Surge Protector Outlet, showing the outlet and LED indicators.
2. Información de seguridade
Lea e comprenda todas as instrucións de seguridade antes de usar este produto. O incumprimento destas instrucións pode provocar descargas eléctricas, incendios ou lesións graves.
- Non desmonte nin modifique o dispositivo.
- Asegurar o voltage e wattage of your appliance do not exceed the protector's specifications (220V, 4400W).
- Non o use en ambientes húmidos nin preto da auga.
- Manter fóra do alcance dos nenos.
- Se o dispositivo parece danado, deixe de usar inmediatamente.
- Este dispositivo está pensado só para uso en interiores.
3. Características do produto
- Vol. axustabletage Regulamento: Customize minimum and maximum voltage thresholds between 170V and 265V to suit your specific needs.
- Protección integral: Guards against high and low voltage, brownouts, spikes, instant surges, power failures, voltage fluctuations, and load shedding.
- Aplicación ampla: Suitable for various home appliances including air conditioners, freezers, ice makers, washing machines, ovens, microwave ovens, dishwashers, coffee machines, bread machines, water heaters, and electric fans.
- Safety Cycle & Delay Function: After a power event, the device initiates a 3-minute delay to confirm voltage stability before restoring power, indicated by a SAFETY CYCLE light turning green.
- Indicadores LED: Clearly displays operational status (Normal Voltage, Waiting Cycle, Over Voltage, Vol. Baixotage).
4. Configuración e instalación
Follow these steps to install your BSEED Surge Protector Outlet:
- Desempaquetar o dispositivo: Retire con coidado o protector de sobretensións da súa embalaxe.
- Identify the Voltage Axuste: Locate the adjustable voltage knob on the back of the unit.
- Axustar Voltage Thresholds (Optional): Using a small screwdriver, carefully turn the knob to set your desired minimum and maximum voltage protection levels (default range is 170V to 265V). Refer to the markings on the back of the unit for guidance.
- Conectar: Insert the surge protector directly into a standard 220V wall outlet.
- Conectar o dispositivo: Plug your appliance into the outlet on the front of the surge protector.
- Encendido: Flip the power switch on the side of the surge protector to the 'ON' position.
Figura 2: Atrás view of the surge protector, highlighting the adjustable voltage regulation knob.
Video 1: Official BSEED video demonstrating the US Plug Home Appliance Surge Protector (220V) and its features.
5. Instrucións de funcionamento
The surge protector operates automatically once plugged in and switched on. Its LED indicators provide real-time status information:
Figure 3: Close-up of the LED indicators on the BSEED Surge Protector.
| Indicador | Estado | Descrición |
|---|---|---|
| Normal Voltage (verde) | Lit | Power is stable and within acceptable voltage range. Appliance is receiving power. |
| Waiting Cycle (Yellow) | Lit | After a power interruption or voltage anomaly, the device is in a 3-minute delay period to stabilize voltage before restoring power. |
| Máis de Voltage (Red) | Lit | Vol. De entradatage is too high. Power to the appliance is cut off for protection. |
| Baixo Voltage (Red) | Lit | Vol. De entradatage is too low (brownout). Power to the appliance is cut off for protection. |
Durante un voltage anomaly (over or low voltage), the corresponding red LED will light up, and power to the connected appliance will be interrupted. Once the voltage returns to a normal range, the 'Waiting Cycle' (yellow) indicator will light up, initiating a 3-minute delay. After this delay, if the voltage remains stable, the 'Normal Voltage' (green) indicator will light up, and power will be restored to your appliance.
6. Mantemento
The BSEED Surge Protector Outlet requires minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:
- Limpeza: Disconnect the surge protector from the wall outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
- Inspección: Periodically inspect the device for any signs of damage, such as cracks in the casing, frayed wires, or discoloration. If any damage is observed, discontinue use and replace the unit.
- Ambiente: Ensure the surge protector is used in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
7 Solución de problemas
If you encounter issues with your surge protector, refer to the following table:
| Problema | Causa posible | Solución |
|---|---|---|
| Appliance not receiving power. | Surge protector is off. | Ensure the power switch on the side is in the 'ON' position. |
| Appliance not receiving power, 'Over Voltage' or 'Low Voltage' LED is lit. | Vol. De entradatage is outside the safe range. | The protector is functioning as designed. Wait for voltage to normalize. If the issue persists, consult an electrician. |
| Appliance not receiving power, 'Waiting Cycle' LED is lit. | Device is in delay mode after a voltage evento. | This is normal. Wait for the 3-minute delay to complete and for the 'Normal Voltage' LED to light up. |
| No LEDs are lit, and no power to appliance. | No power from wall outlet or device malfunction. | Check the wall outlet with another device. If the outlet is functional, the surge protector may be faulty and needs replacement. |
| Vol. axustabletage knob does not seem to change protection levels. | Incorrect adjustment or misunderstanding of function. | Ensure you are using a small screwdriver and turning the knob firmly. The adjustment sets the thresholds, not the output voltage. |
8. Especificacións
| Característica | Detalle |
|---|---|
| Marca | BSEED |
| Número de modelo | BSSP010220V1P-1 |
| Voltage | 220 voltios |
| Corrente máxima | 20 A |
| Clasificación de protección contra sobretensiones | 4400 vatios |
| Total de tomas de corrente | 1 |
| Vol. axustabletage Alcance | 170V - 265V |
| Función de retardo | minutos 3 |
| Tipo de enchufe | Tipo B - 3 pines (norteamericano) |
| Material | Plástico |
| Dimensións do artigo (L x W) | 4.72" de longo x 3.15" de ancho |
9. Garantía e soporte
This BSEED Surge Protector Outlet comes with a 2 ano de garantía from the date of purchase, covering defects in materials and workmanship under normal use. This warranty does not cover damage caused by misuse, accident, unauthorized modification, or external causes.
For technical support, warranty claims, or further assistance, please contact BSEED customer service through the retailer where the product was purchased or visit the official BSEED websitio para información de contacto.