IRIS OHYAMA Handy Powerful Futon Cleaner IC-FAC3 User Manual

1. Introdución e presentación do produtoview

The IRIS OHYAMA Handy Powerful Futon Cleaner IC-FAC3 is designed to efficiently remove dust mites, pollen, and other allergens from your futons and bedding. It combines high-speed vibration with powerful suction and a unique cyclone airflow system to lift and capture microscopic particles. The integrated dust mite sensor provides visual feedback on the cleanliness of your bedding, ensuring thorough cleaning.

Image: The IRIS OHYAMA Handy Powerful Futon Cleaner IC-FAC3, showcasing its compact design and dust mite sensor indicator.

2. Características clave

• High-Speed Beating Function: The cleaner features an ultra-wide beating pad that vibrates approximately 6,500 times per minute, effectively dislodging dust mites and dirt embedded deep within fabric fibers.


Image: Close-up of the ultra-wide beating pad, illustrating its high-speed vibration mechanism.

• Double Cyclone Airflow: A unique vertical and horizontal cyclone airflow system powerfully suctions up dislodged allergens without damaging the fabric. This system achieves a dust mite removal rate of over 98%.


Image: Diagram illustrating the double cyclone airflow, showing how dust and mites are drawn into the cleaner.

• High-Sensitivity Dust Mite Sensor: A sensor detects the amount of dust and mites, indicating the cleanliness level with a color-changing lamp (red for high, yellow for medium, green for low). This allows you to visually confirm cleaning effectiveness.


Image: The dust mite sensor lamp on the cleaner, changing color to indicate the level of dust and mites detected.

• Warm Air Drying Function: While cleaning, the unit blows warm air onto the futon, helping to dry it and create an environment less conducive to dust mite growth.


Image: The cleaner in use on a futon, demonstrating the warm air drying feature.

• Deseño lixeiro e ergonómico: Weighing approximately 1.6 kg, the cleaner is easy to handle and maneuver, reducing fatigue during extended cleaning sessions. Its low center of gravity design enhances operability.


Image: A person holding the lightweight futon cleaner, highlighting its ease of use.

• Potencia con cable: Provides consistent and powerful suction for thorough cleaning without interruption.


Image: The cleaner with its power cord, emphasizing its continuous power supply.

• Almacenamento compacto: The handle can be adjusted to allow for compact storage, fitting easily beside a bed or in small spaces.


Image: The cleaner in its compact storage position, demonstrating space-saving design.

3. Instrucións de configuración

1. Desembalar o limpador: Carefully remove all components from the packaging. Ensure all accessories are present: the main cleaner unit, dust collection filter (pre-set in unit), exhaust filter (pre-set in unit), and 25 disposable filters (1 pre-set in unit).
2. Comprobar filtros: Verify that the dust collection filter and exhaust filter are correctly installed in the main unit. One disposable filter should also be pre-installed in the dust cup.
3. Conectar enerxía: Plug the power cord into a standard AC 100V (50/60Hz) electrical outlet.
4. Axustar a manivela: Adjust the handle to a comfortable angle for operation. The handle has a movable range of 75 degrees.

4. Instrucións de funcionamento

1. Encendido: Preme o botón de acendido para acender a limpeza.
2. Observe Dust Mite Sensor: As you begin cleaning, the dust mite sensor lamp will illuminate. The color indicates the amount of dust and mites detected:
   • Vermello: High amount of dust/mites.
   • amarelo: Medium amount of dust/mites.
   • Verde: Low amount of dust/mites (clean).
3. Técnica de limpeza: Move the cleaner slowly and evenly across the surface of your futon or mattress. Ensure the entire surface is covered, paying extra attention to areas where the sensor indicates higher levels of dust.
4. Warm Air Function: The warm air function operates automatically during cleaning, helping to dry the futon and inhibit dust mite growth.
5. Apagado: Once cleaning is complete and the sensor consistently shows green, press the power button again to turn off the cleaner.

5. Mantemento

Regular maintenance ensures optimal performance and longevity of your futon cleaner.

1. Baleirar o vaso de po:
   • After each use, or when the dust cup appears full, detach it from the main unit.
   • Remove the disposable filter from the dust cup and discard it along with the collected dust.
   • Install a new disposable filter before reattaching the dust cup.
2. Cleaning the Dust Cup and Filter Set:
   • The dust cup and the internal filter set (excluding disposable filters) are washable.
   • Rinse them thoroughly with water.
   • Ensure all parts are completely dry before reassembling them into the cleaner.

Image: Visual guide for detaching, emptying, and washing the dust cup and filter components.

6 Solución de problemas

• Sen enerxía:
  • Comprobe se o cable de alimentación está ben conectado á toma de corrente.
  • Asegúrate de que a toma de corrente funciona probándoa con outro electrodoméstico.
• Potencia de succión reducida:
  • Comprobe se o depósito de po está cheo e precisa ser baleirado.
  • Inspect the disposable filter for excessive clogging and replace if necessary.
  • Ensure the dust cup and internal filter set are clean and properly assembled.
  • Check the suction inlet for any blockages.
• Dust Mite Sensor Not Responding:
  • Ensure the sensor window is clean and free from dust or debris.
  • If the sensor remains unresponsive after cleaning, contact customer support.

If you encounter issues not listed here or if the problem persists after attempting the suggested solutions, please contact IRIS OHYAMA customer support.

7. Especificacións

Image: Diagram showing the cleaner's dimensions and included accessories.

8. Garantía e soporte

This IRIS OHYAMA product comes with a 1 anos de garantía do fabricante desde a data de compra. Conserve o comprobante de compra para reclamacións de garantía.

The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.

For technical assistance, warranty service, or to purchase replacement parts (such as disposable filters), please contact IRIS OHYAMA customer support through their official websitio web ou o vendedor onde se comprou o produto.

Always refer to the official IRIS OHYAMA websitio para obter a información de soporte e os datos de contacto máis actualizados.