BINGFU BFN00291

Bingfu 75 Ohm FM Dipole and 3-Pin AM Loop Antenna Instruction Manual

Model: BFN00291 | Brand: BINGFU

1. Introdución

This manual provides instructions for the installation and operation of your Bingfu 75 Ohm FM Dipole Antenna and 3-Pin AM Loop Antenna. This antenna set is designed to enhance FM and AM radio reception for compatible stereo systems, including various Sony HiFi Series and Sharp Stereo System models. Proper installation ensures optimal signal quality for your audio experience.

2. Contido do paquete

Verifica que todos os compoñentes estean presentes no teu paquete:

  • 1 x 75 Ohm FM Dipole Antenna with F-Type Connector
  • 1 x 3-Pin AM Loop Antenna
Bingfu FM Dipole and AM Loop Antenna Set

Image: The complete Bingfu FM Dipole and AM Loop Antenna set, showing both antennas and their connectors.

3. Instrucións de configuración

Follow these steps to connect your antennas to your stereo receiver:

3.1. Connecting the FM Dipole Antenna

  1. Localiza o FM 75 Ohm UNBAL input terminal on the back of your stereo receiver. This is typically a coaxial F-type connector.
  2. Connect the F-type connector of the FM Dipole Antenna to this terminal. Ensure a secure connection.
  3. Extend the two wires of the dipole antenna fully. For optimal reception, position the wires horizontally in a 'T' shape, away from metal objects and other electronic devices. You may use tape or tacks to secure the wires to a wall or furniture.
FM Dipole Antenna extended

Image: The FM Dipole Antenna with its wires extended, showing the F-type connector.

FM Dipole Antenna F-type connector

Imaxe: Primeiro plano view of the F-type connector on the FM Dipole Antenna.

3.2. Connecting the AM Loop Antenna

  1. Identifica o AM input terminals on your stereo receiver. These are typically two small posts or a 3-pin connector. This antenna uses a 3-pin connector.
  2. Connect the 3-pin connector of the AM Loop Antenna to the corresponding 3-pin AM input on your receiver. Ensure the pins align correctly.
  3. Position the AM Loop Antenna upright on a flat surface near your receiver. Rotate the antenna for the best AM signal reception.
Antena de bucle AM

Image: The AM Loop Antenna, designed for upright placement.

AM Loop Antenna 3-pin connector

Imaxe: Primeiro plano view of the 3-pin connector on the AM Loop Antenna.

3.3. Diagrama de conexión

Refer to the diagram below for a visual guide on connecting both antennas to a typical stereo receiver.

Antenna connection diagram to receiver

Image: Diagram illustrating how to connect the FM Dipole Antenna (F-type) and AM Loop Antenna (3-pin) to the corresponding ports on the back of an audio receiver.

4. Instrucións de funcionamento

Once the antennas are connected, power on your stereo receiver and select the FM or AM tuner function. Use the receiver's tuning controls to scan for radio stations. Adjust the position of both the FM dipole wires and the AM loop antenna as needed to achieve the clearest reception for your desired stations.

  • Para Recepción FM, experiment with the orientation and extension of the dipole wires. Higher placement often yields better results.
  • Para Recepción AM, slowly rotate the AM loop antenna until the signal strength improves and static is minimized.

5. Mantemento

These antennas require minimal maintenance. Keep them clean and dry to ensure longevity and consistent performance.

  • Limpeza: Wipe the antennas with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Colocación: Avoid placing the antennas in direct sunlight, near heat sources, or in areas with high humidity.
  • Coidado do cable: Ensure antenna cables are not kinked, pinched, or stretched excessively, as this can damage the internal wiring and affect signal quality.

6 Solución de problemas

If you experience poor radio reception, consider the following troubleshooting steps:

ProblemaCausa posibleSolución
Weak or no FM signalAntenna not fully extended or poorly positioned.Fully extend the FM dipole wires and reposition them. Try different orientations (e.g., horizontal, vertical) and locations.
Static or distorted AM signalAM loop antenna poorly positioned or interference.Rotate the AM loop antenna slowly to find the optimal orientation. Move it away from other electronic devices that may cause interference.
No signal on either bandLoose connection or incorrect input.Check that both antennas are securely connected to the correct FM and AM input terminals on your receiver. Ensure the receiver is set to the correct tuner mode (FM or AM).
Antenna not compatibleReceiver requires different connector types.Verify your receiver's input types match the antenna connectors (F-type for FM, 3-pin for AM). Consult your receiver's manual if unsure.

7. Especificacións

CaracterísticaDetalle
Tipo de produtoFM Dipole Antenna & AM Loop Antenna Set
Número de modeloBFN00291
Impedancia da antena FM75 Ohms (UNBAL)
Conector de antena FMF-Type Male
AM Antenna Connector3-Pin Mini Connector
Receptores compatiblesSony STR-ZA5000ES, STR-ZA3100ES, STR-ZA2100ES, STR-ZA110ES, STR-ZA810ES, STR-DH130, STR-DH190, STR-DH550, STR-DH590, STR-DH770, STR-DH790, STR-DN1060, STR-DN1070, STR-DN1080, cmt-eh10, cmt-eh12, cmtfx300i, cmtlx20i, hcdec70, hcdec709ip, hcdec77, hcdec78p, hcdec909ip, hcdec99i, hcdeh10, hcdfx300i, mhc-ec50, mhc-ec55, mhcec609ip, mhc-ec69i, mhc-ec70, mhcec709ip, mhcec77, mhcec78, mhcec79i, mhcec909ip, mhcec98p, mhcec98pi, mhcec99i, mhcgx99. Sharp CD3400, CDC1800, CD-C1800C, CDC2700, CDC2700C, CDC2800, CD-C2800C, CDC3300, CDC3400, CD-C3400C, CDC3700, CDC3800, CDC3800C, CDC401, CDC401C, CDC406, CD-C406C, CDC420, CDC420C, CDC422, CD-C422C, CD-C452, CD-C452C, CDC460, CDC462, CD-C462C, CDC470, CDC472, CMSC640, CD-E67, CMSC660, CPC640, MDX5, SC9730, XL505, XL-S10, XL-30, XL-HP500, CD-BA300.
Dimensións do produto6.69 x 4.72 x 0.51 polgadas (17 x 12 x 1.3 cm)
Peso do elemento2.82 onzas (80 gramos)
CorNegro, claro

8. Información da garantía

Specific warranty details for this product are not provided in this manual. For information regarding warranty coverage, please refer to the product packaging or contact the seller directly. Keep your purchase receipt as proof of purchase.

9. Apoio

If you require further assistance or have questions not covered in this manual, please contact the seller or manufacturer through their official support channels. You may also visit the Tenda BINGFU en Amazon para obter información adicional sobre o produto e opcións de contacto.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.