Soporte de parede para TV inclinable Rocketfish

Introdución

This instruction manual provides detailed guidance for the safe and proper installation, operation, and maintenance of your Rocketfish Tilting TV Wall Mount. This mount is designed to securely hold flat-panel TVs ranging from 32 to 90 inches, with a maximum weight capacity of 130 lbs. Please read this manual thoroughly before beginning installation.

Información importante de seguridade

AVISO: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, contact customer support or a qualified installer.

• Do not install this product if you cannot understand the installation instructions.
• Asegúrate de que a superficie de montaxe poida soportar con seguridade o peso combinado do soporte e do televisor.
• Use only the provided hardware. Do not use the mount for any purpose not expressly specified by the manufacturer.
• Este produto está pensado só para uso en interiores.
• Always ensure the TV is securely attached to the mount before releasing.

Contido do paquete

Verify that all components are present and undamaged. If any parts are missing or damaged, do not attempt to install the mount. Contact Rocketfish customer service for assistance.

• Montaxe da placa de parede
• Soportes para TV (2)
• Kit de ferraxes de montaxe (varios parafusos, arandelas, espazadores, ancoraxes)
• Manual de instrucións (este documento)

Image: Main components of the Rocketfish Tilting TV Wall Mount, including the wall plate and two TV brackets.

Imaxe: Desmontada view of the Rocketfish Tilting TV Wall Mount, showing the wall plate and the two vertical TV mounting arms.

Configuración e instalación

Proper installation is crucial for the safety and performance of your TV mount. It is highly recommended to have at least two people for installation.

Ferramentas necesarias (non incluídas):

• Buscador de pernos
• Broca
• Nivel
• Destornillador Phillips
• Lapis
• Cinta métrica

Instalación paso a paso:

1. Prepara a televisión: Lay your TV face down on a soft, clean surface. Attach the two TV brackets to the back of your TV using the appropriate screws and spacers from the hardware kit. Ensure the brackets are centered and securely fastened to the VESA mounting holes.
2. Localizar montantes de parede: Use a stud finder to locate the center of two adjacent wooden studs in your desired mounting location. Mark these locations with a pencil. For concrete or brick walls, use appropriate anchors (not always included, check hardware kit).
3. Colocar a placa de parede: Hold the wall plate against the wall, aligning the mounting holes with the marked stud centers. Use a level to ensure the wall plate is perfectly horizontal. Mark the drill hole locations.
4. Perforar buratos piloto: Drill pilot holes at the marked locations. The size of the drill bit will depend on the type of wall and the lag bolts being used. Refer to the hardware kit instructions for specific drill bit sizes.
5. Fixar a placa de parede: Secure the wall plate to the wall using the lag bolts and washers. Tighten all bolts firmly, but do not overtighten.
6. Colgar a televisión: With assistance, carefully lift the TV and hook the TV brackets onto the top edge of the wall plate. Gently lower the TV until the brackets engage with the wall plate.
7. Asegurar o televisor: Locate the safety screws or locking mechanisms on the bottom of the TV brackets. Tighten these to secure the TV to the wall plate and prevent accidental dislodgement.

Operating the Tilting Feature

The Rocketfish Tilting TV Wall Mount allows for easy adjustment of your TV's vertical viewángulo de ing.

• To tilt the TV, gently push or pull the bottom edge of the TV to achieve the desired angle. The mount is designed for smooth, fingertip tilt action.
• The maximum tilt angle is approximately 10 degrees.
• Ensure all cables are clear and not pinched when adjusting the tilt.

Mantemento

Un mantemento regular garante a lonxevidade e o funcionamento seguro do soporte do teu televisor.

• Limpeza: Limpa o soporte cun pano suave e seco. Non empregues produtos de limpeza abrasivos nin solventes.
• Comprobacións periódicas: Revisa periodicamente todos os parafusos e bulóns para asegurarte de que permanecen axustados. Co paso do tempo, as vibracións ou os axustes poden facer que os elementos de fixación se afrouxen.
• Límite de peso: Nunca exceda a capacidade de peso máxima de 130 lb (58.9 kg).

Resolución de problemas

Especificacións

• Modelo: RF-TVMLPT03
• Dimensións do produto: 1.9 x 28.5 x 17.5 polgadas
• Peso do artigo: 6 libras
• Material: Metal
• Tipo de montaxe: Soporte de parede
• Tipo de movemento: Inclinación
• Minimum Compatible TV Size: 32 polgadas
• Tamaño máximo de TV compatible: 90 polgadas
• Capacidade máxima de peso: Ata 130 libras (58.9 kg)
• Ángulo de inclinación máximo: 10 graos
• Cor: Negro

Garantía e Soporte

For warranty information or technical support, please refer to the official Rocketfish websitio web ou póñase en contacto co seu departamento de atención ao cliente. Garde o recibo de compra para reclamacións de garantía.

Exención de responsabilidade legal: Up to 130 lbs. for sturdy support. (Product packaging may indicate compatibility with 32" - 56" flat-panel TVs.)