Lexmark MX722ade Monochrome Laser Multifunction Printer User Manual

1. Produto rematadoview

The Lexmark MX722ade is a high-performance monochrome laser multifunction printer designed for large workgroup environments. It integrates printing, copying, and scanning functionalities into a single device, offering efficiency and reliability.

Key features include a fast output of up to 70 pages per minute (ppm), rapid first-page-out time, and a powerful 1.2 GHz Quad-Core processor with 2 GB of memory. The printer also supports single-pass two-sided scanning at up to 150 images per minute (ipm) and features a 200-page automatic document feeder. With a standard input capacity of up to 650 sheets and high-yield toner cartridges (up to 55,000 pages), the MX722ade is built for sustained productivity and minimal maintenance.

Figure 1: Lexmark MX722ade Monochrome Laser Multifunction Printer. This image displays the front view of the printer, highlighting its compact design and control panel.

2. Guía de configuración

2.1 Desembalaxe da impresora

1. Retire coidadosamente a impresora da súa embalaxe.
2. Remove all packing materials, tapes, and protective films from the exterior and interior of the printer. Refer to the quick setup guide included in the box for specific locations of packing materials.
3. Coloque a impresora sobre unha superficie estable e nivelada con ventilación axeitada.

2.2 Installing Toner Cartridge and Imaging Unit

1. Abra a porta de acceso frontal da impresora.
2. Unpack the imaging unit and toner cartridge.
3. Insert the imaging unit into the printer until it clicks into place.
4. Insert the toner cartridge into the imaging unit until it locks securely.
5. Peche a porta de acceso frontal.

2.3 Carga de papel

1. Pull out the paper tray until it stops.
2. Axuste as guías do papel para que coincidan co tamaño do papel que se vai cargar.
3. Load paper with the print side facing up. Do not overfill the tray.
4. Empurre con coidado a bandexa de papel de volta na impresora.

2.4 Conectar a impresora

1. Conecte o cable de alimentación á impresora e despois a unha toma de corrente con conexión a terra.
2. Para a conectividade de rede, conecte un cable Ethernet desde o porto Ethernet da impresora ao enrutador ou conmutador de rede.
3. Power on the printer using the power button.

2.5 Instalación do controlador

After connecting the printer, install the necessary drivers on your computer. Drivers can typically be found on the Lexmark support website by searching for the MX722ade model.

3. Instrucións de funcionamento

3.1 Impresión de documentos

1. Ensure the printer is powered on and connected to your network.
2. Abre o documento que queres imprimir no teu ordenador.
3. Seleccione File > Imprimir (ou o comando equivalente na túa aplicación).
4. Choose the Lexmark MX722ade from the list of available printers.
5. Adjust print settings such as paper size, orientation, and number of copies as needed. For duplex printing, select the two-sided printing option.
6. Fai clic Imprimir.

3.2 Copia de documentos

1. Place the document face-up in the automatic document feeder (ADF) or face-down on the scanner glass.
2. No panel de control da impresora, seleccione a opción Copiar función.
3. Adjust settings such as number of copies, darkness, and two-sided copying.
4. Preme o Comeza botón para comezar a copiar.

3.3 Escanear documentos

1. Place the document face-up in the automatic document feeder (ADF) or face-down on the scanner glass.
2. No panel de control da impresora, seleccione a opción Escanear función.
3. Choose the scan destination (e.g., network folder, email, USB drive).
4. Adjust scan settings such as resolution, file formato e modo de cor.
5. Preme o Comeza botón para comezar a dixitalizar.

4. Mantemento

4.1 Substitución do cartucho de tóner

When the printer indicates a low toner level or print quality degrades, it's time to replace the toner cartridge. The Lexmark MX722ade uses high-yield cartridges capable of up to 55,000 pages.

1. Open the front access door.
2. Remove the old toner cartridge by pulling it out.
3. Desembale o novo cartucho de tóner e axíteo suavemente para distribuír o tóner.
4. Insert the new cartridge into the imaging unit until it clicks into place.
5. Peche a porta de acceso frontal.

4.2 Limpeza da impresora

• Exterior: Limpe as superficies exteriores cun suave, damp, pano que non solte fiapos. Non empregue produtos de limpeza abrasivos nin disolventes.
• Cristal do escáner: Limpar o cristal do escáner cun pano suave e sen fiaposampened with glass cleaner. Ensure no residue is left.
• Rodillos do alimentador automático de documentos (ADF): Periodically clean the ADF rollers to prevent paper jams and misfeeds. Refer to the printer's on-screen instructions or the full user guide for detailed steps.

4.3 Actualizacións de firmware

Regularly check the Lexmark support websitio para actualizacións de firmware. Manter o firmware da impresora actualizado garante un rendemento óptimo e acceso ás últimas funcións e melloras de seguridade.

5 Solución de problemas

This section provides solutions to common issues. For more complex problems, refer to the full user guide or contact Lexmark support.

5.1 Atascos de papel

• Síntoma: Printer stops printing, error message indicates a paper jam.
• Solución:
  1. Open all access doors and trays as indicated by the printer's control panel.
  2. Carefully remove any jammed paper, pulling in the direction of the paper path.
  3. Ensure no small pieces of paper remain.
  4. Close all doors and trays. The printer should resume operation.

5.2 Mala calidade de impresión

• Síntoma: Faded prints, streaks, or uneven toner distribution.
• Solución:
  1. Check toner cartridge level and replace if low.
  2. Ensure the imaging unit is properly seated.
  3. Perform a print quality test from the printer's control panel and follow any calibration instructions.
  4. Limpe o cristal do escáner se o problema ocorre durante a copia ou a dixitalización.

5.3 A impresora non responde

• Síntoma: Printer is online but does not print, or is not detected by the computer.
• Solución:
  1. Verify all cables (power, Ethernet) are securely connected.
  2. Reinicie a impresora e o ordenador.
  3. Check network connectivity. Ensure the printer has a valid IP address.
  4. Reinstala ou actualiza os controladores da impresora no teu ordenador.

6. Especificacións técnicas

7. Garantía e soporte

7.1 Garantía do produto

The Lexmark MX722ade Monochrome Laser Multifunction Printer is covered by a Garantía limitada de por vida. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and limitations, please refer to the warranty documentation included with your product or visit the official Lexmark websitio.

7.2 Atención ao cliente

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Lexmark Customer Support. Support resources, including drivers, manuals, and FAQs, are available on the official Lexmark support websitio.

• Soporte en liña: Visit the official Lexmark support websitio.
• Asistencia telefónica: Refer to the contact information provided on the Lexmark websitio para a súa rexión.