hykolity 4FT 40W LED Wraparound Light Instruction Manual

1. Información de seguridade

Please read and understand all instructions before beginning installation. Failure to follow these instructions may lead to electrical shock, fire, or other hazards that could cause property damage or personal injury.

• AVISO: Desconecte a alimentación no disyuntor antes da instalación ou do mantemento.
• Non manipule ningún dispositivo energizado nin intente energizar ningún dispositivo coas mans molladas ou estando de pé sobre unamp superficie.
• Ensure the fixture is mounted onto a sound structure capable of supporting its weight.
• This fixture is designed for use in 100-277VAC 60Hz based circuits.
• Product is ETL certified for superior quality, safety, and reliability.
• Este produto está deseñado só para uso en interiores.

2. Contido do paquete

Carefully unpack the fixture and components. Inspect for any damage. Keep all packaging materials until installation is complete.

• LED Wraparound Light Fixture
• Bloque de terminais
• Nuts de arame
• Ancoraxes de drywall
• M3xL10 Screws (for terminal block)
• Junction Box Machine Screws
• Parafusos autorroscantes
• Manual de instrucións

3. Especificacións

Image: Detailed product dimensions and a visual representation of the included mounting hardware.

4. Instalación

Before starting, ensure the power is turned off at the circuit breaker. This fixture can be installed using a J-Box or directly flush-mounted to the ceiling.

4.1. Preparing the Fixture

1. Remove the prismatic acrylic lens from the fixture housing. Gently squeeze the edge of the diffuser and carefully release it from the housing.
2. If using for ceiling-mounted installation, knock out the end port for power wire access.

Image: Step-by-step diagrams for diffuser removal and wire connection.

4.2. J-Box Installation

1. Measure the required length of the fixture and power wires to fit inside the J-box. Trim the wires to the correct length and secure them with the built-in wire clips.
2. Install M4x25 screws into the J-box.
3. Connect the house ground wire to the fixture's ground wire using a wire nut.
4. Connect the house white wire to the fixture's neutral wire using a wire nut.
5. Connect the house black wire to the fixture's hot wire using a wire nut.
6. Attach the fixture housing to the J-box by aligning the keyholes on the housing with the screws on the J-box. Turn the housing clockwise to lock in place and tighten the screws.
7. Finally, install the prismatic lens by carefully squeezing and inserting it into the housing.

4.3. Ceiling-Mounted Installation

1. Secure the terminal block to the fixture baseplate using the provided M3x10 screws.
2. Connect the fixture wires (ground, neutral, hot) to the terminal block.
3. Mount the light fixture to the ceiling using self-tapping screws and drywall anchors (if needed).
4. Connect the power supply wires from the ceiling to the terminal block.
5. Finally, install the prismatic lens by carefully squeezing and inserting it into the housing.

Image: Visual guide for easy and fast installation to the ceiling.

4.4. Linkable Design

This wraparound shop light features a continuous-interlocking design, allowing you to link multiple fixtures together. Up to 4 fixtures can be assembled in a line by knocking out the hole on the end of each fixture and connecting them with jumper wires (connection line not included). Secure connections with strain relief clamps.

Image: Illustration of the linkable design, showing the knock-out hole for connecting multiple units.

5. Funcionamento

Once properly installed and wired, the hykolity 4FT 40W LED Wraparound Light operates by a standard wall switch connected to the circuit. Simply toggle the switch to turn the light on or off. The fixture provides a consistent 4000K Neutral White light output.

6. Mantemento

The hykolity LED Wraparound Light is designed for minimal maintenance. The LED technology eliminates the need for bulb replacements, and the prismatic acrylic lens is durable and resistant to breakage.

• Limpeza: Para limpar o aparello, asegúrese de que a corrente estea desconectada. Use un pano suave eamp cloth to wipe the surface. Avoid abrasive cleaners or solvents that may damage the finish or lens.
• Lens Durability: The prismatic acrylic lens is engineered for impact resistance and durability.

7 Solución de problemas

If the fixture does not operate correctly, refer to the following common issues and solutions:

• A luz non se acende:
  • Comprobe o disxuntor para asegurarse de que o aparello recibe corrente.
  • Verify all wire connections are secure and correctly installed.
• Light flickers or dims:
  • Ensure all electrical connections are tight.
  • Confirmar o voltage supply is within the specified range (100-277V).
• Ruído inusual:
  • LED fixtures are generally silent. If noise occurs, check for loose components or wiring.

If issues persist after checking these points, please contact hykolity customer support.

8. Garantía e soporte

The hykolity 4FT 40W LED Wraparound Light comes with a 5 ano de garantía, ensuring quality and performance. For warranty claims, technical assistance, or any questions regarding your product, please contact hykolity customer support.

Image: Product features highlighting the 5-year warranty and ETL certification.

You can find more information and contact details on the official hykolity websitio web ou a través da túa plataforma de compra.