1. Introdución
The eXuby Tiny Dog Training Collar is designed to assist in training small dogs weighing 5-15 lbs. It offers sound, vibration, and static shock modes with 9 intensity levels, controlled by a pocket-sized remote. The collar is water-resistant and features a long-lasting rechargeable battery for convenience and durability.
Image 1.1: The eXuby Tiny Dog Training Collar in various usage scenarios with small dogs.
2. Que hai na caixa
Please ensure all components are present upon unboxing:
- 1x Tiny Shock Collar Unit
- 2x Colored Face Plates (Teal is pre-installed)
- 1x Mando a distancia
- 1x Remote Strap
- 1x Reflective Vinyl Strap
- 2x Long Metal Probes
- 2x Short Metal Probes
- 2x Long Rubber Probe Covers
- 2x Short Rubber Probe Covers
- 1x Plastic Bracket
- 1 x adaptador de CA
- 1x Dual Charging Cord
- 1x Shock Tester
- 1X Probe Wrench/Spanner
- 1 x Manual de usuario
Image 2.1: All included accessories and the eXuby Tiny Dog Training Collar components.
3. Configuración
3.1. Carga dos dispositivos
The collar unit and remote control both feature built-in rechargeable batteries. Use the provided dual charging cord and AC adapter to charge both devices simultaneously. A fast charger is included to minimize charging time.
3.2. Attaching Probes and Covers
Select the appropriate metal probes (long for long-haired dogs, short for short-haired dogs) and screw them into the collar unit. For added comfort and to prevent skin irritation, place the corresponding rubber probe covers over the metal probes.
3.3. Adjusting the Collar Strap
The reflective vinyl strap is adjustable to ensure a snug yet comfortable fit for your dog. Ensure the probes make proper contact with your dog's skin without being too tight. The collar dimensions are approximately 2” width, 1” depth, and 1.5” height for the main unit.
3.4. Powering On/Off and Pairing
Press and hold the power button on both the remote and the collar unit to turn them on. The devices are factory-paired. Refer to the video below for visual guidance on powering on and mode switching.
Video 3.1: Instructions on how to power on the remote and collar, and switch between training modes.
Image 3.1: Detailed diagram highlighting features of the eXuby Tiny Dog Training Collar remote and collar unit.
4. Modos de funcionamento
The eXuby Tiny Dog Training Collar offers three distinct training modes: sound, vibration, and static shock. Each mode has adjustable intensity levels to suit your dog's temperament and training needs.
4.1. Modo de son
The sound mode provides an audible cue to your dog. This can be used as a warning or to gain your dog's attention. The remote allows for adjustment of sound intensity.
4.2. Modo de vibración
The vibration mode delivers a gentle tactile sensation. This is often effective for dogs that respond well to subtle cues. There are 9 intensity levels for vibration.
4.3. Static Shock Mode
The static shock mode provides a mild static correction. This mode should be used cautiously and at the lowest effective setting. There are 9 intensity levels for static shock. Always start with the lowest level and increase only if necessary.
4.4. Testing the Shock Function
To ensure the static shock function is working correctly, use the provided shock tester. Place the tester over the probes and activate the shock mode on the remote. The tester will illuminate if the shock is functioning.
Video 4.1: Demonstrates how to test the static shock mode using the provided test lamp.
Video 4.2: Visual guide on using the test light for the shock function.
5. Mantemento
5.1. Limpeza
Hand wash the collar strap with water as needed and allow it to air dry. Regularly inspect the probes and the collar unit for any dirt or debris and clean gently with a soft, damp pano.
5.2. Coidado da batería
The collar and remote feature long-lasting rechargeable Lithium Ion batteries. To prolong battery life, avoid fully discharging the devices frequently. Recharge as needed using the provided dual charging cord.
6 Solución de problemas
- O colar non responde: Ensure both the remote and collar unit are powered on and fully charged. Check if they are properly paired.
- No correction felt: Verify the probes are making good contact with your dog's skin. Adjust the strap or use longer probes if your dog has thick fur. Use the shock tester to confirm the function is active.
- Activación accidental: The remote features a lock button on the back to prevent unintended commands. Utilize this feature when not actively training.
- Can que non responde á corrección: Adjust the intensity level of the chosen mode. Ensure the correction is noticeable but not overly harsh. Consistency in training is key.
7. Especificacións
| Característica | Detalle |
|---|---|
| Número de modelo | EXBTZ812 |
| Marca | eXuby |
| Dimensións do produto | 5.08 x 2.54 x 3.81 cm (Collar Unit); 5.1L x 2.5W Centimetres (Collar Strap) |
| Peso do elemento | 56.7 g (2 onzas) |
| Baterías | 1 baterías de iones de litio (incluídas) |
| Material | Plástico |
| Tipo de peche | Fibela |
| Recomendación de raza | Small Dogs (5-15 lbs) |
| Resistencia á auga | Si |
| UPC | 850004603253 |
8. Garantía e soporte
For warranty information, technical support, or any product-related inquiries, please refer to the contact details provided in the packaging or visit the official eXuby websitio. Conserve o recibo de compra para reclamacións de garantía.