1. Introdución
Thank you for choosing the CALEX 965254 Retro Pendant Lamp. This instruction manual provides important information for the safe installation, operation, and maintenance of your new pendant lampLea este manual detidamente antes da instalación e gárdeo para futuras consultas.
The CALEX Retro Pendant Lamp features a bronze E27 fitting designed to accommodate lamps with a thicker neck and longer base. Its larger holder with two adjustable rings ensures a secure and proper fit for various E27 bulbs. The cord length is 2 meters.
2. Instrucións de seguridade
- Seguridade eléctrica: Installation must be performed by a qualified electrician or in accordance with local electrical codes. Always disconnect power at the main circuit breaker before installation, maintenance, or bulb replacement.
- Compatibilidade con lámpadas: Empregue só lámpadas con base E27. Non exceda a potencia máximatage especificado na lamp holder (if applicable).
- Manexo: Manexa o lamp and bulb with care. Avoid dropping or subjecting them to impact.
- Ambiente: Este lamp Está deseñado só para uso en interiores. Non o expoña á humidade nin a temperaturas extremas.
- Limpeza: Asegurar o lamp is switched off and cool before cleaning. Use a soft, dry cloth.
3. Contido do paquete
Desembala a caixa con coidado e asegúrate de que todos os compoñentes estean presentes e estean intactos. Se falta algunha peza ou está danada, non procedas coa instalación e ponte en contacto co teu vendedor.
- 1x CALEX Retro Pendant Lamp, Bronze E27 fitting with 2-meter cord
This image shows the CALEX 965254 Retro Pendant Lamp, E27 Bronze fitting, packaged in its retail box. The box highlights the 'Cord set' and '1x E27' compatibility, along with the '2 METRES' cord length.
4. Configuración e instalación
Siga estes pasos para a instalación correcta:
- Preparación para a instalación: Turn off the main power supply to the installation area at the circuit breaker.
- Montar o colgante: Securely attach the pendant lamp's ceiling rose (not explicitly detailed in product info, assume standard mounting) to the ceiling junction box using appropriate screws and anchors. Ensure all electrical connections are made correctly (Live, Neutral, Earth) according to local wiring regulations.
- Insira a lámpada: Carefully screw an E27 base bulb into the lamp holder. The bronze fitting features two adjustable rings; ensure they are positioned to securely hold the bulb's neck and base.
- Axustar a lonxitude do cable: If necessary, adjust the cord length by shortening it within the ceiling rose or by using a cord grip.
- Restaurar enerxía: Unha vez completada a instalación e todas as conexións estean seguras, restableza a alimentación no disxuntor.
5. Funcionamento
The CALEX Retro Pendant Lamp operates via a standard wall switch connected to its electrical circuit. Simply toggle the switch to turn the lamp on ou off.
- Substitución da lámpada: To replace the bulb, first turn off the power at the wall switch and, if possible, at the main circuit breaker. Allow the bulb to cool completely. Unscrew the old bulb and carefully screw in a new E27 bulb. Ensure the adjustable rings are correctly positioned for the new bulb.
6. Mantemento
Un mantemento regular axudará a preservar a aparencia e a funcionalidade do seu colgante.amp.
- Limpeza: Disconnect power before cleaning. Use a soft, dry, lint-free cloth to wipe the bronze fitting and cord. Do not use abrasive cleaners, solvents, or polishes, as these may damage the finish.
- Inspección: Periodically inspect the cord and fitting for any signs of wear or damage. If any damage is observed, discontinue use and consult a qualified electrician.
7 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Lamp non se ilumina. | Sen fonte de alimentación. | Comprobe o disxuntor e o interruptor de parede. |
| Bombilla defectuosa. | Replace the bulb with a new, working E27 bulb. | |
| Conexión solta. | (WARNING: Disconnect power first) Check bulb seating and wiring connections. Consult an electrician if unsure. | |
| O bulbo parpadea. | Lámpada solta ou lámpada incompatible. | (WARNING: Disconnect power first) Tighten the bulb. Ensure the bulb is E27 and compatible with the lampespecificacións de. |
8. Especificacións
- Modelo: CALEX 965254
- Tipo de axuste: E27
- Material: Glass (bulb not included), Bronze (fitting)
- Cor: Bronce
- Lonxitude do cable: 2 metros
- Voltage: 240 voltios
- Tipo de montaxe: Surface-mounted (Aufputz)
- País de orixe: China
- GTIN: 08712879135357
9. Garantía e soporte
Para obter información sobre a garantía ou asistencia técnica, consulte a documentación incluída coa súa compra ou póñase en contacto co seu vendedor. Garde o comprobante de compra para calquera reclamación de garantía.