Candy CI642CTT
CANDY CI642CTT Induction Hob
Manual de usuario
1. Introdución
Thank you for choosing the CANDY CI642CTT Induction Hob. This manual provides essential information for the safe and efficient use of your new appliance. Please read it thoroughly before installation and operation, and keep it for future reference.
1.1 Instrucións de seguridade
Siga sempre as precaucións de seguridade básicas ao usar electrodomésticos para reducir o risco de incendio, descarga eléctrica, queimaduras ou lesións.
- Asegúrese de que o aparello sexa instalado por un técnico cualificado de acordo coa normativa local.
- Do not operate the hob if the ceramic glass surface is cracked or broken. Contact customer service immediately.
- Manteña os nenos lonxe do aparello durante o funcionamento, xa que as superficies poden quentarse.
- Non garde materiais inflamables enriba ou preto da placa de cocción.
- Empregue só utensilios de cociña aptos para indución.
- Nunca deixes cociñar sen vixilancia, especialmente cando uses axustes de temperatura alta.
- Limpa a placa de cocción con regularidade para evitar a acumulación de graxa, que pode supoñer un perigo de incendio.
- Desconecte o aparello da fonte de alimentación antes da limpeza ou mantemento.
2. Produto rematadoview
2.1 Compoñentes
The CANDY CI642CTT Induction Hob features four independent cooking zones and a sleek ceramic glass surface.

Figura 2.1: Arriba view of the CANDY CI642CTT Induction Hob, showing the four cooking zones and control panel.
The hob is designed for seamless integration into your kitchen countertop, offering a modern aesthetic and efficient cooking performance.
2.2 Panel de control
The touch-sensitive control panel allows for precise management of each cooking zone and access to special functions.

Figure 2.2: Close-up of the control panel, displaying touch controls for power, heat settings, and special functions like Boost and Stop-&-Go.
The panel includes individual power level indicators for each zone, a timer function, and dedicated buttons for activating special features.
3. Instalación
Unha instalación axeitada é fundamental para o rendemento seguro e óptimo da súa placa de indución. Debe ser instalada por un electricista ou técnico cualificado.
3.1 Colocación e dimensións
Ensure adequate ventilation around the appliance. Refer to the diagram below for precise cutout dimensions for your countertop.

Figure 3.1: Installation diagram showing the required cutout dimensions for the countertop and the hob's overall size.
| Medición | Valor |
|---|---|
| Dimensións do produto (L x W x H) | 59 cm x 52 cm x 5.5 cm |
| Ancho de corte | 56 cm |
| Profundidade de corte | 49 cm |
| Peso | 8.6 kg |
3.2 Conexión eléctrica
The hob requires a dedicated electrical circuit. Ensure the power supply matches the specifications on the rating plate of the appliance. The connection must be made using an electric cable by a qualified professional.
- Verifique que o voltage and frequency of your electrical supply match those indicated on the hob's rating label.
- Install an all-pole disconnection switch with a contact separation of at least 3mm in the fixed wiring.
- O aparello debe estar conectado a terra.
4. Funcionamento
4.1 Primeiro uso
Before first use, clean the ceramic glass surface with a damp cloth. Ensure all packaging materials are removed. The hob may emit a slight odor during its first few uses; this is normal and will dissipate.
4.2 Cociña básica
- Place suitable induction-compatible cookware centrally on the desired cooking zone.
- Toca o botón de acendido para acender a placa.
- Seleccione a zona de cocción que desexa activar.
- Adjust the heat level using the '+' and '-' touch controls. The display will show the selected power level.
- To turn off a cooking zone, select it and reduce the power level to '0' or press the dedicated off button if available.
- To turn off the entire hob, touch the main power button.
4.3 Funcións especiais
The CANDY CI642CTT Induction Hob is equipped with advanced features to enhance your cooking experience.
- Función de impulso: This function temporarily increases the power of a selected cooking zone to its maximum level, ideal for rapidly boiling water or searing food. Activate by selecting the zone and pressing the 'Boost' button (if available) or by quickly increasing the power to the highest setting. The booster will automatically reduce power after a set time to prevent overheating.
- Stop-&-Go Function: This feature allows you to pause all active cooking zones and then resume them with the same settings. This is useful if you need to step away from the hob temporarily. Press the 'Stop-&-Go' button to activate and deactivate.
- Función de temporizador: Each cooking zone can be set with an independent timer. Once the set time expires, the cooking zone will automatically switch off.
5. Limpeza e Mantemento
Unha limpeza e un mantemento regulares garantirán a lonxevidade e o rendemento óptimo da súa placa de indución.
5.1 Limpeza diaria
- Asegúrate sempre de que a placa estea fría antes de limpala.
- Wipe the ceramic glass surface with a soft cloth or sponge and warm soapy water.
- Para manchas difíciles, use un limpador especializado para placas de vitrocerámica.
- Enxágüe ben e seque cun pano limpo para evitar marcas de auga.
5.2 Limpeza profunda
- For burnt-on food or melted plastic, use a hob scraper designed for ceramic glass surfaces. Hold the scraper at a shallow angle to avoid scratching.
- Apply a small amount of ceramic hob cleaner and rub gently with a paper towel.
- Polish the surface with a clean, dry cloth for a streak-free finish.
- Evita produtos de limpeza abrasivos, estropajos ou produtos químicos agresivos, xa que poden danar a superficie.
6 Solución de problemas
Antes de contactar co servizo de atención ao cliente, consulte a seguinte táboa para ver os problemas máis habituais e as súas solucións.
| Problema | Causa posible | Solución |
|---|---|---|
| A placa non se acende. | Sen subministración eléctrica; bloqueo infantil activado. | Check circuit breaker; deactivate child lock (refer to control panel section). |
| A zona de cocción non quenta. | Cookware not induction-compatible or not properly placed. | Use induction-compatible cookware; ensure cookware is centered on the zone. |
| A pantalla mostra un código de erro. | Erro interno específico. | Apague a placa, agarde uns minutos e volva a acender. Se o erro persiste, póñase en contacto co servizo de atención ao cliente. |
| Hob makes a buzzing noise. | Funcionamento normal da tecnoloxía de indución; calidade dos utensilios de cociña. | This is normal. Some cookware may amplify the sound. Ensure cookware has a flat, thick base. |
| A placa apágase inesperadamente. | Overheating protection activated; spill on control panel. | Allow hob to cool down; clean control panel and ensure it's dry. |
7. Especificacións técnicas
Detailed technical data for the CANDY CI642CTT Induction Hob.
| Característica | Detalle |
|---|---|
| Marca | Doce |
| Número de modelo | CI642CTT (8016361990081) |
| Dimensións do produto (L x W x H) | 59 cm x 52 cm x 5.5 cm |
| Peso | 8.6 kg |
| Elementos calefactores | 4 Zonas de indución |
| Material da superficie | Vidro cerámico |
| Cor | Negro |
| Fonte de enerxía | Cable eléctrico |
| Características especiais | Boost Function, Stop-&-Go Function |
| Sistema de ignición | Electrónica |
For more detailed product information and energy efficiency data, please refer to the official EPREL database: https://eprel.ec.europa.eu/qr/1221884
8. Garantía e soporte
Your CANDY CI642CTT Induction Hob comes with a manufacturer's warranty. Please refer to the warranty card provided with your appliance for specific terms and conditions, including the warranty period and coverage details.
Para obter asistencia técnica, pezas de reposto ou para programar unha cita de servizo, póñase en contacto co servizo de atención ao cliente de Candy. Os datos de contacto adoitan atoparse na páxina oficial do fabricante. websitio web ou na documentación da súa compra.
When contacting support, please have your product model number (CI642CTT) and serial number (if applicable) ready to expedite the service process.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.