Manual de usuario da bomba submerxible DAB FEKA 600 MA

1. Introdución

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your DAB FEKA 600 MA submersible pump. Please read this manual thoroughly before using the pump and keep it for future reference.

The DAB FEKA 600 MA is a robust submersible pump designed for draining and lifting light wastewater, greywater, and rainwater in domestic and residential environments. It is suitable for both fixed and mobile installations.

2. Información de seguridade

Observe sempre as seguintes precaucións de seguridade para evitar lesións persoais e danos na bomba.

• Seguridade eléctrica: Ensure the power supply matches the pump's specifications. Always disconnect power before performing any maintenance or installation. Do not operate the pump with a damaged power cord.
• Seguridade na auga: Never touch the pump or the water it is pumping while it is connected to power. This pump is designed for water only; do not use it for flammable, corrosive, or explosive liquids.
• Instalación: Install the pump in a well-ventilated area. Ensure the pump is stable and cannot tip over. Do not lift the pump by its power cable.
• Nenos e animais: Manteña os nenos e as mascotas lonxe da bomba e da súa zona de funcionamento.
• Mantemento: Only qualified personnel should perform repairs. Use only genuine replacement parts.

3. Produto rematadoview

The DAB FEKA 600 MA pump is engineered for reliability and durability, featuring high-quality materials and a robust design.

Figure 3.1: DAB FEKA 600 MA Submersible Pump - Front View.

Figure 3.2: Key Features of the DAB FEKA 600 MA Pump. This diagram highlights the automatic start/stop float arm, durable construction materials, a flow rate of 15,000 liters per hour, a maximum head of 9 meters, and the ability to handle solids up to 25mm. Note: Official specifications for flow rate and head are provided in Section 8.

3.1 Compoñentes clave

• Corpo da bomba: Constructed from technopolymer for durability.
• Suction Grille: Designed for efficient intake and handling of solids.
• Motor: Asynchronous submersible motor for continuous duty, with integrated thermal protection for single-phase versions. Made of AISI 304 stainless steel with an AISI 431 steel shaft for corrosion resistance.
• Interruptor flotante: Integrated float switch for automatic operation (in automatic versions).
• Triple Seal System: Oil bath triple seal for enhanced reliability.

3.2 Aplicacións

The FEKA 600 MA pump is suitable for various applications, including:

Figure 3.3: Common Applications for the DAB FEKA 600 MA Pump. This image illustrates its use for emptying crawl spaces, pumping dirty water, dewatering construction sites, and managing rainwater.

• Draining crawl spaces
• Pumping dirty water and greywater
• Dewatering construction sites
• Managing rainwater

4. Configuración e instalación

Unha instalación axeitada é crucial para o rendemento e a lonxevidade da bomba. Siga estes pasos atentamente.

4.1 Lista de comprobación previa á instalación

• Ensure the installation site is clear of debris and has adequate space.
• Comprobe a fonte de alimentación voltage e a frecuencia coinciden cos requisitos da bomba.
• Prepare the discharge pipe and any necessary fittings.

4.2 Pasos da instalación

1. Colocación da bomba: Place the pump on a stable, flat surface in the lowest part of the area to be drained. Ensure the suction grille is not obstructed. The minimum admission level is 38 mm.
2. Conexión do tubo de descarga: Attach a suitable discharge pipe to the pump's outlet. Ensure all connections are watertight. The pump has a 1 1/4" G threaded outlet.
3. Float Switch Adjustment (for automatic versions): Adjust the float switch cable length to set the desired ON/OFF levels. Ensure the float can move freely without obstruction.
4. Conexión de alimentación: Connect the pump to a grounded electrical outlet. Ensure the circuit is protected by a residual current device (RCD).
5. Proba: Before full operation, perform a test run to ensure the pump activates and deactivates correctly and that there are no leaks.

For detailed technical specifications and installation diagrams, refer to the official technical sheet: DAB FEKA Technical Sheet.

5. Instrucións de funcionamento

The DAB FEKA 600 MA pump is designed for straightforward operation.

5.1 Automatic Operation (with float switch)

1. Ensure the pump is properly installed and connected to power.
2. A bomba arrancará automaticamente cando o nivel da auga suba e levante o interruptor de flotador.
3. The pump will automatically stop when the water level drops and the float switch returns to its lower position.

5.2 Manual Operation (without float switch or for specific tasks)

For manual versions or when bypassing the float switch:

1. Connect the pump to power. The pump will begin operating immediately.
2. Monitor the water level to prevent the pump from running dry for extended periods. The pump can run dry for up to 1 minute without damage.
3. Disconnect the pump from power to stop operation.

Importante: Do not allow the pump to run dry for more than 1 minute. Prolonged dry running can cause damage.

6. Mantemento

Regular maintenance ensures optimal performance and extends the pump's lifespan. Always disconnect the pump from the power supply before any maintenance.

6.1 Limpeza da bomba

• Periodically inspect the suction grille for blockages from debris, leaves, or other solids. Clean as necessary.
• Rinse the pump with clean water after use, especially if pumping heavily contaminated liquids.

6.2 Almacenamento de inverno

Se a bomba non se vai usar durante un período prolongado ou a temperaturas de conxelación:

• Drain all water from the pump and discharge pipe.
• Limpar a bomba a fondo.
• Garde a bomba nun lugar seco e libre de xeadas.

6.3 Servizo profesional

For internal components, motor, or seal inspection, it is recommended to contact a qualified service technician. Do not attempt to disassemble the motor housing.

7 Solución de problemas

Antes de contactar co servizo de asistencia, volva aview os seguintes problemas comúns e as súas solucións.

8. Especificacións técnicas

Detailed specifications for the DAB FEKA 600 MA pump.

For complete technical details, please refer to the official product documentation provided by DAB PUMPS.

9. Garantía e soporte

Información sobre a garantía do produto e a atención ao cliente.

9.1 Información da garantía

Specific warranty terms and conditions are typically provided with your purchase documentation or can be found on the manufacturer's official websitio. Garde o comprobante de compra para reclamacións de garantía.

9.2 Atención ao cliente

For technical assistance, spare parts, or service inquiries, please contact your authorized DAB PUMPS dealer or visit the official DAB PUMPS websitio para información de contacto.

Official commercial profile of the Feka range: DAB FEKA Commercial Profile.