Broan-NuTone SPK80L Bluetooth Speaker Ventilation Fan with LED Light

1. Introdución

Thank you for choosing the Broan-NuTone SPK80L Bluetooth Speaker Ventilation Fan with LED Light. This innovative product combines efficient ventilation with a high-fidelity Bluetooth speaker and integrated LED lighting, designed to enhance comfort and air quality in your bathroom. This manual provides essential information for safe installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your unit.

2. Información de seguridade

Please read and understand all instructions before beginning installation or operation. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• Desconecte sempre a alimentación no panel de servizo antes de conectar ou realizar o mantemento da unidade.
• All wiring must be done by a qualified electrician in accordance with all applicable codes and standards, including fire-rated construction codes and standards.
• Esta unidade está deseñada só para uso xeral de ventilación. Non a empregue para extraer materiais e vapores perigosos ou explosivos.
• To reduce the risk of fire or electrical shock, do not expose this unit to water or moisture.
• This product is UL listed for use over a bathtub or shower when connected to a GFCI-protected branch circuit (ceiling mount only).

3. Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• Carcasa do ventilador de ventilación
• Grille Assembly with Integrated LED Light and Bluetooth Speaker
• Hardware de instalación
• Manual de usuario

4. Especificacións

5. Instalación

This fan is designed for easy installation, fitting 2"x8" ceiling construction. A tapered, polymeric 4-inch round duct fitting ensures a positive duct connection without metallic clatter.

Pasos xerais de instalación:

1. Preparar a zona: Ensure power is disconnected at the circuit breaker. Clear the installation area in the ceiling.
2. Montar a carcasa: Secure the fan housing to the ceiling joists. The housing dimensions are approximately 8.25" x 8" x 5.75".
3. Conectar a canalización: Attach the 4-inch round duct to the fan's duct connector. Ensure a secure and airtight connection.
4. Cablear a unidade: Connect the electrical wiring according to local electrical codes. The unit requires 120V power.
5. Install Grille Assembly: Once the housing is secured and wired, attach the grille assembly, ensuring it snaps firmly into place.

6. Instrucións de funcionamento

Fan and Light Operation:

The fan and LED light are typically controlled via a standard wall switch. Consult your electrician for specific wiring configurations if you desire separate control for the fan and light functions.

Funcionamento do altofalante Bluetooth:

The integrated Sensonic Bluetooth speaker allows you to stream audio wirelessly from any Bluetooth-enabled device.

Vincular o teu dispositivo:

1. Ensure the fan unit has power. The Bluetooth speaker will automatically enter pairing mode when powered on.
2. No teu teléfono intelixente ou noutro dispositivo compatible con Bluetooth, navega ata a configuración de Bluetooth.
3. Look for a device named "FAN SPEAKER" (or similar, refer to your device's specific instructions if different).
4. Select "FAN SPEAKER" to pair. Once paired, you will hear an audible confirmation tone from the speaker.
5. You can now stream audio from your device to the fan's speaker.

The speaker does not require a specific application for functionality.

7. Mantemento

Regular cleaning and maintenance will ensure the long-term performance and efficiency of your ventilation fan.

Limpeza da reixa:

1. Disconnect power to the fan at the service panel.
2. Gently pull down the grille assembly from the ceiling. It is typically held by spring clips.
3. Wipe the grille with a damp cloth using a mild, non-abrasive cleaning solution. Do not spray water directly onto the grille or electrical components.
4. Allow the grille to dry completely before reattaching.

Cleaning the Fan Motor and Housing:

Periodically, the fan motor and housing may accumulate dust and debris. This should be cleaned by a qualified service person.

• Disconnect power to the fan at the service panel.
• Remove the grille assembly.
• Carefully vacuum or wipe away any dust from the fan blades and interior of the housing. Avoid touching electrical components.
• Reattach the grille assembly and restore power.

8 Solución de problemas

If your fan is not operating correctly, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, please contact Broan-NuTone Customer Support.

9. Información da garantía

The Broan-NuTone SPK80L Bluetooth Speaker Ventilation Fan with LED Light is backed by a Garantía limitada de tres anos. This warranty covers defects in materials and workmanship under normal use and service. For full details regarding warranty coverage, terms, and conditions, please refer to the official warranty document included with your product or visit the Broan-NuTone websitio.

10. Información de soporte

For technical assistance, replacement parts, or further inquiries, please contact Broan-NuTone Customer Support:

• Websitio: Visita a páxina oficial de Broan-NuTone websitio para preguntas frecuentes, rexistro de produtos e recursos adicionais.
• Teléfono: Consulte a información de contacto que aparece na embalaxe do produto ou na páxina oficial websitio web con números de teléfono de atención ao cliente.

Please have your model number (SPK80L) and purchase date available when contacting support.