Maxlite SL-48231-50
Manual de instrucións da luz de taller Maxlite SL-48231-50
Model: SL-48231-50
Produto rematadoview
The Maxlite Shop Light SL-48231-50 is a 48-inch, 23W, 120V LED shop light designed for various indoor applications such as garages, workshops, and basements. It provides instant full brightness with a 5000K daylight color temperature and is ENERGY STAR certified for energy efficiency. This fixture features a built-in on/off pull chain, a 5ft power cord with a 120V plug, and is linkable with up to 4 units for extended lighting coverage.

Image: Maxlite Shop Light SL-48231-50, a white 48-inch LED fixture with a pull chain and power outlet on one end.
Información de seguridade
Always read and follow all safety instructions before installation and operation. Disconnect power before servicing. This product is intended for indoor use only. Do not modify the fixture or use it for purposes other than its intended use.
- Ensure the power supply is turned off at the circuit breaker before installation.
- Do not install near heat sources or in wet locations.
- Use appropriate mounting hardware for your installation surface.
- Do not exceed the maximum linkable units (4 units).
Configuración e instalación
The Maxlite Shop Light SL-48231-50 is designed for semi-flush ceiling mount installation. No assembly is required for the light fixture itself.
Contido do paquete:
- 1 x Maxlite Shop Light SL-48231-50
- Mounting hardware (hooks, chains, screws)
- 5ft power cord with 120V plug
Pasos de instalación:
- Prepare a zona de instalación: Choose a suitable location for mounting, such as a garage, workshop, or basement. Ensure the surface can support the weight of the fixture (approximately 15.5 ounces).
- Apagar a enerxía: Before beginning any electrical work, turn off the power to the installation area at the main circuit breaker.
- Montar o aparello:
- Mark the desired mounting points on the ceiling or wall.
- Install the provided mounting hardware (e.g., ceiling hooks or screws) securely into the marked points.
- Hang the shop light using the installed hardware. The fixture has screw holes for flush mounting.
- Conectar enerxía: Plug the 5ft power cord into a standard 120V electrical outlet.
- Link Multiple Units (Optional): If linking multiple units, connect the linking cable from the output end of one fixture to the input end of the next. Do not exceed 4 linked units.
- Restaurar enerxía: Unha vez completada a instalación e todas as conexións estean seguras, volva conectar a alimentación no disyuntor.
Instrucións de funcionamento
The Maxlite Shop Light SL-48231-50 is simple to operate using its integrated pull chain.
- Activando: Gently pull the chain extending from the fixture once to turn the light on.
- Desactivando: Gently pull the chain again to turn the light off.
The light provides instant full brightness upon activation.
Mantemento
The Maxlite Shop Light SL-448231-50 requires minimal maintenance due to its LED technology.
- Limpeza: Before cleaning, ensure the power is disconnected. Use a soft, dry cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or electrical components.
- Substitución da lámpada: This fixture uses integrated LED lighting and does not require bulb replacement. If the LEDs fail, the entire fixture typically needs to be replaced.
- Inspección: Periodically inspect the power cord and mounting hardware for any signs of wear or damage. If damage is found, discontinue use and contact a qualified electrician or the manufacturer.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non acende. |
|
|
| A luz parpadea ou esmorece. |
|
|
| Linked lights do not work. |
|
|
Especificacións
| Característica | Detalle |
|---|---|
| Marca | Maxlite |
| Número de modelo | SL-48231-50 |
| Dimensións do produto | 48 cm de longo x 2 cm de ancho x 2.5 cm de alto |
| Peso do elemento | 15.5 onzas |
| Tipo de fonte de luz | LED |
| Wattage | 23 vatios |
| Voltage | 120 voltios |
| Temperatura da cor | 5000K (luz do día) |
| Método de control | Control de cadea de tracción |
| Tipo de montaxe | Ceiling Mount (Semi Flush) |
| Uso interior/exterior | Interior |
| Fonte de enerxía | Eléctrico con cable |
| Enlazable | Ata 4 unidades |
| Certificacións | ENERGY STAR certified, ETL |
Garantía e Soporte
Información da garantía:
This Maxlite product comes with a Limited Warranty. For specific terms and conditions of the warranty, please refer to the documentation included with your purchase or visit the official Maxlite website. The provided data states "Warranty Description: N/a.", indicating general warranty information is not detailed here, but a limited warranty is offered.
Atención ao cliente:
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Maxlite customer support. Visit the official Maxlite websitio para obter a información de contacto máis actualizada.
You can also visit the Maxlite store on Amazon for more information: Maxlite Amazon Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.