1. Produto rematadoview
The HYPERLITE 4FT 40W Vapor Tight LED Light is a durable and efficient lighting fixture designed for challenging environments. It provides bright, cool white illumination and features a robust, sealed construction for protection against dust and water.
Características principais:
- Alto Brillo: 40W, 5200 lumens, 130 lumens per watt.
- Construción duradeira: Polycarbonate material with stainless clips for a vapor-tight seal.
- Protección ambiental: IP65 rated for dust and water resistance.
- Ancho VoltagRango: Operates on 100-277V AC.
- Longa vida útil: Rated for over 50,000 hours.
- Certificacións: Listado UL por seguridade e fiabilidade.
2. Información de seguridade
Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Desconecte sempre a alimentación no disyuntor antes de instalar ou realizar o mantemento da instalación.
- Installation should be performed by a qualified electrician in accordance with national and local electrical codes.
- Do not install in areas where the operating temperature exceeds the specified range (-22°F to 113°F).
- Asegúrese de que todas as conexións estean seguras e debidamente illadas.
- Non modifiques o aparello de ningún xeito.
3. Instalación
The HYPERLITE Vapor Tight LED Light is designed for easy surface mounting on ceilings or walls. Mounting hardware is included.
3.1. Contido do paquete
- HYPERLITE 4FT 40W Vapor Tight LED Light Fixture
- Soportes de montaxe
- Parafusos e ancoraxes
- Nuts de arame
3.2. Instrucións de montaxe
- Prepare a zona de instalación: Ensure the power is off at the circuit breaker. Select a suitable location for mounting on a ceiling or wall.
- Marcar os orificios de montaxe: Use the mounting brackets as a template to mark the desired locations for drilling holes.
- Instalar soportes de montaxe: Drill pilot holes and secure the mounting brackets to the surface using the provided screws and anchors.
- Adxunta o dispositivo: Carefully snap the LED light fixture into place on the installed mounting brackets. Ensure it is securely seated.
- Reinforce (Optional): For added security, use the nut reinforcement installation method if applicable to your mounting brackets.
3.3. Cableado Eléctrico
The fixture includes a terminal block for quick and secure wiring connections.
- Connect the live (black) wire from your power source to the live terminal on the fixture.
- Connect the neutral (white) wire from your power source to the neutral terminal on the fixture.
- Connect the ground (green/bare copper) wire from your power source to the ground terminal on the fixture.
- Ensure all connections are tight and properly insulated with wire nuts.
3.4. Daisy Chain Connection
Multiple HYPERLITE Vapor Tight LED Lights can be daisy-chained together using the integrated 2-foot wire for simplified wiring. The 40W model can connect up to 17 lamps.
4. Funcionamento
Once installed and wired correctly, the HYPERLITE Vapor Tight LED Light operates by a standard electrical switch (push button type). Ensure the power supply is restored after installation.
4.1. Intended Use Environments
This fixture is suitable for both indoor and outdoor use in various demanding environments, including:
- Garages and Workshops
- Barns and Agricultural Buildings
- Cold Storage and Walk-in Freezers (operating range -22°F to 113°F)
- Outdoor Corridors and Porches
- Warehouses and Industrial Facilities
- Lavados de automóbiles
5. Mantemento
The HYPERLITE Vapor Tight LED Light requires minimal maintenance due to its durable and sealed design.
5.1. Limpeza
- Asegúrese de desconectar a alimentación antes de limpar.
- Limpar o exterior do aparello cun pano suave eamp pano.
- Do not use abrasive cleaners or solvents, as these may damage the polycarbonate material.
- The IP65 rating ensures protection against dust and water jets, making external cleaning straightforward.
5.2. Inspección
- Periodically inspect the fixture for any signs of physical damage or loose connections.
- Check the mounting brackets to ensure they remain secure.
6 Solución de problemas
If you encounter issues with your HYPERLITE Vapor Tight LED Light, refer to the following common troubleshooting steps:
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non se acende | Sen fonte de alimentación Conexión de cableado solta Interruptor defectuoso | Comprobe o disyuntor e a fonte de alimentación Verificar que todas as conexións de cableado estean seguras Proba ou substitúe o interruptor |
| A luz é tenue ou parpadea | Vol. incorrectotage Conexión solta Fixture damage | Garantir voltage is within 100-277V range Comprobe as conexións do cableado Ponte en contacto co servizo de atención ao cliente se está danado |
| Water or dust inside fixture | Instalación incorrecta Damage to seal | Ensure all seals and clips are properly secured Inspect for cracks or damage; contact support |
If these steps do not resolve the issue, please contact HYPERLITE customer support.
7. Especificacións
Detailed technical specifications for the HYPERLITE 4FT 40W Vapor Tight LED Light.
| Atributo | Especificación |
|---|---|
| Nome do modelo | Luz estanca ao vapor |
| Número de modelo do artigo | LED-JJ-21W-TRI |
| Wattage | 40 vatios |
| Brillo | 5200 lúmenes |
| Eficacia luminosa | 130 lúmenes por vatio |
| Temperatura da cor | 5000K (branco frío) |
| Voltage | 100-277V AC |
| Dimensións (L x W x H) | 47.24" x 3.54" x 3.26" |
| Peso do elemento | 4.74 libras |
| Material | Policarbonato |
| Clasificación IP | IP65 (a proba de po e auga) |
| Temperatura de funcionamento | -22 °F a 113 °F (-30 °C a 45 °C) |
| Vida útil | Máis de 50,000 horas |
| Certificacións | Listado UL |
| Tipo de montaxe | Surface (Ceiling/Wall) |
| Compoñentes incluídos | Hardware de montaxe |
8. Garantía e soporte
HYPERLITE stands behind the quality of its products.
8.1. Información da garantía
Este produto vén cun 36 meses de garantía desde a data de compra. Esta garantía cobre defectos de materiais e fabricación en condicións de uso normal.
8.2. Política de devolucións
A Período de devolución de 30 días is offered for this product.
8.3. Atención ao cliente
For any questions, technical assistance, or warranty claims, please contact HYPERLITE customer service. Our dedicated team is available to provide exceptional after-sales support.
Please refer to the HYPERLITE official websitio web ou a documentación da súa compra para obter os datos de contacto.