Manual do usuario do colar de choque pequeno eXuby

1. Introdución

Thank you for choosing the eXuby Tiny Shock Collar. This device is designed to assist in training small dogs (5-15 lbs) by providing sound, vibration, and static stimulation to correct unwanted behaviors. Please read this manual thoroughly before use to ensure proper operation and the safety of your pet.

Información importante de seguridade

• This product is intended for use with healthy dogs weighing between 5 and 15 lbs. Do not use on puppies under 6 months old.
• Do not use this collar on aggressive dogs. If your dog exhibits aggressive behavior, consult a professional dog trainer.
• Avoid leaving the collar on the dog for more than 12 hours per day to prevent skin irritation.
• Regularly check your dog's neck for signs of irritation or sores. If irritation occurs, discontinue use until the skin heals.
• The static stimulation is designed to be a deterrent, not to cause harm. Always start with the lowest intensity level and gradually increase if necessary.
• This is not an automatic bark collar; it requires manual operation via the remote.

2. Contido do paquete

Verifique que todos os elementos que se indican a continuación estean incluídos no seu paquete:

• eXuby Tiny Shock Collar Receiver
• Transmisor remoto
• Correa de colar axustable
• Long and Short Contact Points (2 pairs)
• Silicone Conductive Covers (2 pairs)
• USB Split Charging Cable
• Adaptador de alimentación
• Ferramenta de proba de luz
• Interchangeable Faceplates (Black, Blue, Pink)
• Wrist Strap for Remote
• Manual de usuario (este documento)

3. Compoñentes Overview

Receptor de colar

• Puntos de contacto: Deliver static stimulation. Choose based on dog's fur length.
• Porto de carga: For recharging the receiver battery.
• Indicador LED: Shows power status and battery life.
• Botón de encendido: Acende/apaga o receptor.
• Interchangeable Faceplate: Allows for personalization.

Transmisor remoto

• Pantalla LCD: Shows mode, intensity level, and battery status.
• Botón de modo: Cycles through Sound, Vibration, and Shock modes.
• Botón Y: Activates the selected correction mode.
• Botóns arriba / abaixo: Adjusts intensity levels (1-9).
• Botón 1/2: Switches between controlling Collar 1 or Collar 2 (if applicable).
• Porto de carga: For recharging the remote battery.

4. Configuración

4.1 Carga dos dispositivos

Before first use, fully charge both the collar receiver and the remote transmitter. The devices use Lithium Ion batteries.

1. Connect the USB split charging cable to the charging ports on both the receiver and the remote.
2. Plug the USB cable into the power adapter and then into a standard wall outlet.
3. The LED indicator on the receiver will glow red during charging and turn green when fully charged. The remote's battery icon on the LCD will show charging status.
4. A carga adoita tardar de 2 a 3 horas.

4.2 Attaching Contact Points

Select the appropriate contact points based on your dog's fur length:

• Use short contact points for dogs with short fur.
• Use long contact points for dogs with thick or long fur.

Screw the chosen contact points firmly onto the receiver. You may also place the silicone conductive covers over the contact points for added comfort, especially if using static stimulation.

4.3 Axuste do colar

Proper fit is crucial for effective and safe operation.

1. Position the receiver on your dog's neck so that the contact points are underneath, making direct contact with the skin.
2. The collar should be snug, but not too tight. You should be able to fit one finger comfortably between the collar strap and your dog's neck.
3. If the collar is too loose, the stimulation may not be consistent. If it's too tight, it could cause skin irritation.

5. Instrucións de funcionamento

5.1 Acendido/Apagado

• Receptor: Press and hold the power button on the receiver until the LED indicator flashes. To turn off, press and hold the power button until the LED turns off.
• Control remoto: Press any button to wake up the remote. It will automatically go into standby mode after a period of inactivity.

5.2 Pairing the Remote and Receiver

The devices are usually pre-paired from the factory. If re-pairing is needed:

1. Ensure both devices are fully charged and turned off.
2. Acende o control remoto.
3. Press and hold the power button on the receiver until the LED indicator flashes rapidly.
4. Within 10 seconds, press the 'Y' button on the remote. The receiver's LED will stop flashing and remain solid, indicating successful pairing.

5.3 Selecting Modes and Intensity Levels

The remote offers three correction modes: Sound, Vibration, and Static Stimulation (Shock).

• Preme o Modo button on the remote to cycle through the modes. The selected mode will be displayed on the LCD.
• Usa o Arriba/Abaixo arrow buttons to adjust the intensity level for Vibration and Static Stimulation modes (levels 1-9). Sound mode has a fixed intensity.
• Preme o Y button to deliver the selected correction.

5.4 Training Guidelines

• Comezar baixo: Always begin with the lowest intensity level for vibration or static stimulation. Observe your dog's reaction and increase only if necessary. The goal is to get their attention, not to cause pain.
• Consistencia: Use the collar consistently for specific behaviors you want to correct.
• Temporalización: Deliver the correction immediately as the unwanted behavior occurs. This helps your dog associate the correction with the action.
• Reforzo positivo: Always pair corrections with positive reinforcement when your dog performs the desired behavior.
• Short Sessions: Keep training sessions short and positive.

6. Mantemento

6.1 Limpeza

• Regularly clean the collar strap and receiver with a damp pano.
• Clean the contact points to ensure good conductivity.
• Ensure devices are dry before charging or storing.

6.2 Coidado coa batería

• Charge the devices when the battery indicator is low.
• For long-term storage, charge the batteries to about 50% and store in a cool, dry place. Recharge every few months to prevent deep discharge.

7 Solución de problemas

8. Especificacións

9. Garantía e soporte

eXuby products are designed for quality and durability. For specific warranty information or technical support, please refer to the warranty card included in your package or visit the official eXuby website. You can also contact eXuby customer service directly for assistance.

Visit the eXuby Store: eXuby Official Store

10. Vídeos oficiais de produtos

Non se atoparon vídeos oficiais de produtos do vendedor nos datos proporcionados.