SiFENE Cold Press Juicer Machine User Manual

Introdución

Thank you for choosing the SiFENE Cold Press Juicer Machine. This appliance is designed to efficiently extract juice from a variety of fruits and vegetables, preserving nutrients through its slow masticating technology. Please read this manual thoroughly before operation to ensure safe and optimal performance.

Información importante de seguridade

Siga sempre as precaucións de seguridade básicas ao usar electrodomésticos para reducir o risco de incendio, descarga eléctrica e/ou lesións ás persoas.

• Read all instructions before using the juicer.
• Non mergullo a base do motor en auga ou outros líquidos.
• Ensure the appliance is properly assembled and locked before operation.
• Manteña as mans e os utensilios fóra da canle de alimentación durante o funcionamento para evitar lesións.
• Always unplug the juicer from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Non faga funcionar ningún aparello cun cable ou enchufe danados, ou despois de que o aparello funcione mal ou teña dano dalgún xeito.
• Este aparello é só para uso doméstico. Non use ao aire libre.
• Vixiar de preto os nenos cando o aparello estea en uso.

Compoñentes do produto

Familiarize yourself with the parts of your SiFENE Cold Press Juicer.

• 

  Figure 1: Fully assembled SiFENE Cold Press Juicer Machine.

• 

  Figure 2: Juicer components as received in packaging, including the main unit, pulp and juice containers, and user manual.
• 

  Figure 3: Visual guide to the assembly process, showing individual parts like the motor base, juicing bowl, auger, filter, and lid.

Os compoñentes clave inclúen:

• Base do motor con panel de control
• Bol de zume
• 7-Stage Spiral Auger
• Double-Layer Filter
• Wide Feed Chute Lid with Dual Mouth
• Contedor de celulosa
• Recipiente de zume
• Cepillo de limpeza

Configuración

Before first use, wash all detachable parts with warm, soapy water. Rinse thoroughly and dry. Ensure the motor base is unplugged during assembly.

1. Coloque a base do motor sobre unha superficie estable e plana.
2. Align the juicing bowl with the motor base and rotate it clockwise until it locks securely into place. A red dot on the bowl should align with a red dot on the base.
3. Insert the 7-stage spiral auger into the center of the juicing bowl.
4. Place the double-layer filter over the auger, ensuring it sits firmly in the juicing bowl.
5. Attach the wide feed chute lid, aligning the arrow on the lid with the unlock symbol on the juicing bowl. Rotate clockwise until the arrow aligns with the lock symbol. Ensure it clicks into place.
6. Coloque o recipiente da polpa debaixo da boquilla de polpa e o recipiente do zume debaixo da boquilla de zume.

Figure 4: Step-by-step assembly guide for the juicer.

Instrucións de funcionamento

Preparación dos ingredientes

• Lave ben todas as froitas e verduras.
• The 83mm wide chute accommodates whole fruits and vegetables, reducing the need for pre-cutting. For very large items or fibrous vegetables like celery, it is recommended to cut them into smaller pieces to prevent clogging and optimize juice extraction.
• Remove hard pits from fruits (e.g., peaches, plums, cherries) and tough skins (e.g., pineapple, melon, citrus).

Figure 5: The 83mm extra-large mouth allows for whole fruits, simplifying preparation.

Figure 6: The dual mouth design is suitable for both whole fruits and long vegetables.

Proceso de zumo

1. Conecte o espremedor a unha toma de corrente con conexión a terra.
2. Preme o ON/OFF button to turn on the juicer.
3. Usa o FWD (Forward) mode for normal juicing. This mode operates at a low speed (47-60 RPM) to minimize heat buildup and oxidation, preserving nutrients.
4. Gradually feed prepared ingredients into the wide feed chute. Use the food pusher if necessary, but do not force ingredients.
5. Juice will flow into the juice container, and pulp will be expelled into the pulp container.
6. If ingredients get stuck or the juicer clogs, press the REV (Reverse) button for a few seconds to clear the blockage. Then switch back to FWD modo.
7. After juicing, press the ON/OFF button to turn off the juicer and unplug it from the outlet.

Figure 7: Control panel with Forward (FWD) and Reverse (REV) functions for efficient juicing and clog prevention.

Figure 8: The juicer is designed for high juice yield, extracting up to 90% of the liquid from produce.

Mantemento e Limpeza

Regular cleaning ensures the longevity and hygiene of your juicer. All detachable parts are rinseable and dishwasher safe.

1. Desenchufe o espremedor da toma de corrente.
2. Disassemble the juicer by rotating the lid counter-clockwise, then removing the filter, auger, and juicing bowl.
3. Rinse all detachable parts under running water. Use the provided cleaning brush to remove any pulp residue from the filter and other components.
4. For thorough cleaning, parts can be placed in the dishwasher (top rack recommended).
5. Limpe a base do motor cun anuncioamp pano. Nunca mergullo a base do motor na auga.
6. Deixe que todas as pezas se sequen completamente antes de volver montar ou almacenar.

Figure 9: The juicer is designed for easy assembly and cleaning, with most parts being dishwasher safe.

Resolución de problemas

Especificacións

Garantía e Soporte

SIFENE is committed to customer satisfaction. For any questions, concerns, or warranty claims regarding your juicer, please contact our dedicated customer service team.

• Manufacturer: SIFENE
• For support, please refer to the contact information provided in your product packaging or visit the official SIFENE websitio.