XINJIA Electronic Watch User Manual

1. Introdución

Grazas pola compraasing the XINJIA Electronic Watch, Model XJ-832. This watch is designed for students and individuals seeking a reliable, luminous, waterproof, and shockproof timepiece suitable for daily wear and outdoor activities. This manual provides detailed instructions on how to set up, operate, and maintain your watch to ensure its longevity and optimal performance.

Figura 1: Fronte view of the XINJIA XJ-832 electronic watch. This image shows the watch face with a digital display, surrounded by a red bezel. The watch has four buttons labeled LIGHT, MODE, START, and RESET on its sides. The display shows the time, AM/PM indicator, and other small icons.

2. Configuración

2.1 Desembalaxe

Carefully remove the watch from its packaging. Inspect the watch for any visible damage. Ensure all protective films are removed from the watch face and back before use.

2.2 Encendido inicial

The watch is pre-installed with a battery and should be operational upon unboxing. If the display is blank, press any button to activate it. If it remains blank, refer to the Troubleshooting section.

2.3 Configuración de data e hora

To set the time and date on your XINJIA XJ-832 watch, follow these steps:

1. No modo de visualización da hora normal, prema a tecla MODO button three times to enter the time setting mode. The seconds digits will begin to flash.
2. Preme o RESET button to cycle through the setting options: Seconds → Hours → Minutes → Month → Date → Day of the Week.
3. While the desired digit or setting is flashing, press the INICIO botón para axustar o valor. Manteña o INICIO button to quickly advance the numbers.
4. Unha vez axustados todos os axustes, prema o botón MODO button once to return to the normal time display mode.

Note: The watch typically uses a 12-hour format with AM/PM indicators. Ensure you set the correct AM/PM when adjusting the hour.

3. Instrucións de funcionamento

3.1 Funcións dos botóns

• Botón LUZ (arriba á esquerda): Activates the luminous backlight for easy viewen condicións de pouca luz.
• Botón MODE (abaixo á esquerda): Cycles through different modes: Normal Time → Stopwatch → Alarm Setting → Time/Date Setting.
• Botón START (arriba á dereita): Used to start/stop the stopwatch, adjust values in setting modes, and activate the alarm.
• Botón RESET (abaixo á dereita): Used to reset the stopwatch, cycle through setting options, and turn off the alarm.

3.2 Using the Luminous Display

Preme o LUZ button (top left) to illuminate the watch face. The backlight will remain on for a few seconds, allowing you to read the time in the dark.

3.3 Using the Alarm Function

Para configurar a alarma:

1. Desde a visualización normal da hora, prema a tecla MODO button twice to enter the alarm setting mode. The hour digits will flash.
2. Preme o INICIO botón para axustar a hora.
3. Preme o RESET botón para cambiar ao axuste dos minutos.
4. Preme o INICIO botón para axustar os minutos.
5. Preme o MODO botón para saír do modo de configuración da alarma.

To turn the alarm on/off: In normal time display, press and hold the INICIO botón e, a continuación, prema RESET button simultaneously. An alarm icon will appear/disappear on the display.

To stop a sounding alarm: Press any button.

3.4 Using the Stopwatch (Timing Function)

Para usar o cronómetro:

1. Desde a visualización normal da hora, prema a tecla MODO button once to enter the stopwatch mode. The display will show "00:00:00".
2. Preme o INICIO botón para comezar a cronometrar.
3. Preme o INICIO botón de novo para pausar o tempo.
4. Mentres está en pausa, prema a tecla RESET botón para reiniciar o cronómetro a "00:00:00".
5. Preme o MODO botón para volver á visualización normal da hora.

3.5 Viewing Date and Day of the Week

Na pantalla normal da hora, prema e manteña premida a tecla INICIO button to momentarily display the date and day of the week. Release the button to return to the time display.

4. Mantemento

4.1 Limpeza

Para limpar o reloxo, límpeo suavemente cun pano suave eamp cloth. Do not use harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch's finish or internal components. For stubborn dirt, a mild soap solution can be used, followed by wiping with a clean, damp pano.

4.2 Resistencia á auga

The XINJIA XJ-832 watch is rated for 30M (3ATM) water resistance. This means it is suitable for daily use, splashes, rain, and brief immersion in water. It is NON suitable for showering, bathing, swimming, diving, or any activities involving high-pressure water or prolonged immersion. Do not operate buttons when the watch is wet or submerged, as this can compromise the water seal.

Figura 2: Atrás view of the XINJIA XJ-832 electronic watch. This image displays the stainless steel case back, which is engraved with "WATER RESISTANT 3BAR" and "STAINLESS STEEL BACK", indicating its water resistance rating.

4.3 Substitución da batería

The watch uses a standard button cell battery. When the display becomes dim or the watch stops functioning, it may be time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure the water resistance seal is properly maintained. Attempting to replace the battery yourself may void the warranty and compromise the watch's water resistance.

5 Solución de problemas

6. Especificacións

7. Garantía e soporte

This XINJIA Electronic Watch is covered by a limited warranty against manufacturing defects. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details. Keep your proof of purchase for warranty claims.

For technical support, service, or warranty inquiries, please contact your retailer or the manufacturer directly. Contact information may be found on the product packaging or the official brand websitio.

Disclaimer: The manufacturer and distributor are not responsible for any damage or malfunction caused by improper use, unauthorized repairs, or failure to follow the instructions in this manual.