Orbit Easy Dial 6-Station Indoor Sprinkler Controller

1. Introdución

The Orbit 6-zone indoor sprinkler controller is designed to provide convenient and flexible control over your lawn or garden watering schedule. Its user-friendly interface simplifies setup and customization, offering features such as rain delay, water budgeting, and dual watering programs to meet specific irrigation needs.

This manual provides detailed instructions for the installation, operation, and maintenance of your Orbit Easy Dial Sprinkler Controller.

Características principais:

• Flexible Watering Options: Set water duration for each station between 1-240 minutes.
• Efficient Watering Schedule: Up to 8 start times per day to reduce water runoff.
• Función de retardo por choiva: Pause watering for 24, 48, or 72 hours.
• Water Budgeting: Adjust run times based on seasonal changes.
• Dual Watering Programs: Independent programs for customized intervals, days of the week, or even/odd watering days.

Figura 1.1: Fronte view of the Orbit Easy Dial 6-Station Indoor Sprinkler Controller, showing the LCD display, control buttons, and rotary dial.

2. Información de seguridade

Please read all safety information before installing or operating the controller. Failure to follow these instructions could result in injury or property damage.

• Este controlador está deseñado para só para uso interior. Do not install outdoors or in areas exposed to water.
• Asegúrese de desconectar a fonte de alimentación antes de realizar calquera cableado ou mantemento.
• All electrical connections should be made in accordance with local electrical codes.
• Non intente reparar a unidade vostede mesmo. Encargue todo o mantemento a persoal cualificado.

3. Configuración e instalación

3.1 Montaxe do controlador

Choose a suitable indoor location near a standard 120V AC electrical outlet. Avoid areas with extreme temperatures or direct sunlight.

1. Marque a localización desexada para a montaxe na parede.
2. Install two mounting screws (not included) into the wall, leaving approximately 1/8 inch (3 mm) of the screw head exposed. The screws should be spaced vertically to align with the keyhole slots on the back of the controller.
3. Hang the controller on the screws.

Figura 3.1: Example of the controller mounted on a wall in an indoor setting.

3.2 Cableado do controlador

Before wiring, ensure the power adapter is unplugged from the electrical outlet.

1. Cable común (COM): Connect the common wire from your sprinkler valves to the terminal labeled 'COM' on the controller. This is typically a white wire.
2. Cables de zona (1-6): Connect each individual zone wire from your sprinkler valves to the corresponding numbered terminals (1 through 6) on the controller.
3. Rain Sensor (Optional): If using a rain sensor (sold separately), connect its wires to the 'SENSOR' terminals. Ensure the rain sensor switch inside the controller is set to 'ON' if a sensor is connected. If no sensor is used, keep the switch 'OFF' and ensure the jumper wire is in place between the sensor terminals.
4. Conexión de alimentación: Plug the included 24V AC transformer into the '24VAC' terminals on the controller. Then, plug the transformer into a standard 120V AC electrical outlet.

Figura 3.2: detallada view of the wiring terminals, showing connections for 24VAC, SENSOR, COM, and zones 1-6.

4. Instrucións de funcionamento

The Orbit Easy Dial controller features a rotary dial for selecting functions and a set of buttons for adjusting settings.

Figura 4.1: Panel de controlview, highlighting the LCD display, directional buttons, and function dial.

4.1 Setting Current Time and Date

1. Xire o disco para DATA/RELOXO.
2. Usa o + e - buttons to set the current year, then press ENTRAR.
3. Repeat for month, day, hour, and minute.

4.2 Programming Watering Schedules (Programs A & B)

The controller supports two independent programs (A and B) for different watering needs.

4.2.1 Axuste das horas de inicio

1. Xire o disco para HORA DE INICIO.
2. The display will show '1'. Use + e - to set the first start time, then press ENTRAR.
3. Continue setting up to 8 start times for the current program. To skip a start time, press ENTRAR without setting a time.
4. To switch between Program A and B, press the PROGRAM A-B botón.

4.2.2 Setting Run Times (How Long)

1. Xire o disco para CANTO TEMPO.
2. The display will show 'STATION 1'. Use + e - to set the watering duration (1-240 minutes) for Station 1, then press ENTRAR.
3. Repeat for each station (1-6).
4. To switch between Program A and B, press the PROGRAM A-B botón.

4.2.3 Setting Watering Days (How Often)

1. Xire o disco para Cantas veces.
2. Podes escoller entre tres opcións:
   • Days of the Week: Usa o FRECHA Á DEREITA button to move to the desired day, then press ENTRAR to select/deselect.
   • Intervalos: Use + e - to set the interval (e.g., every 2 days).
   • Even/Odd Days: Select 'EVEN' or 'ODD' for watering on even or odd calendar days.
3. To switch between Program A and B, press the PROGRAM A-B botón.

4.3 Función de retardo por choiva

The rain delay feature allows you to temporarily suspend your watering schedule for a set period.

1. Xire o disco para AUTO.
2. Preme o RETRASO DA CHUVIA botón.
3. Usa o + e - buttons to select a delay of 24, 48, or 72 hours.
4. The controller will automatically resume the schedule after the delay period. To cancel, press BORRAR.

4.4 Water Budgeting

The water budgeting feature allows you to adjust all programmed run times by a percentage, useful for seasonal adjustments without reprogramming each station.

1. Xire o disco para ORZAMENTO.
2. Usa o + e - buttons to adjust the percentage (e.g., 50% to reduce watering by half, 150% to increase by 50%).
3. The change applies to all active programs and stations.

4.5 Funcionamento manual

To manually water a specific station or all stations:

1. Xire o disco para AUTO.
2. Preme o MANUAL botón.
3. Usa o FRECHA Á DEREITA or FRECHA ESQUERDA para seleccionar a emisora ​​desexada ou "TODAS" para todas as emisoras.
4. Preme ENTRAR.
5. Use + e - to set the manual run time.
6. Preme ENTRAR para iniciar o rego manual.
7. Para deter o rego manual, prema BORRAR.

4.6 Turning Off the Controller

To stop all automatic watering, turn the dial to DESACTIVADO. The controller will retain its programming.

5. Mantemento

• Manteña o controlador limpo e libre de po e residuos. Use un pano suave e seco para limpalo.
• Ensure the controller is not exposed to moisture or direct water spray.
• Comprobe periodicamente as conexións dos cables para asegurarse de que estean ben fixadas.
• During winter months in cold climates, it is recommended to disconnect the controller and store it indoors to prevent damage from freezing temperatures.

6 Solución de problemas

7. Especificacións

8. Garantía e soporte

For specific warranty information and detailed support, please refer to the official Orbit website or contact Orbit customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Orbit is a leading provider of watering solutions, committed to delivering quality products and customer satisfaction.

You can visit the official Orbit store for more information and product support: Orbit Store on Amazon