Produto rematadoview
The Energizer Headband Light is a hands-free LED lighting solution designed for various activities. It features a comfortable, stretchy headband with an integrated light unit. The device offers two light modes and provides up to 100 lumens of illumination. It is powered by AAA batteries and is built with a shatterproof lens and non-slip grip for durability and secure wear.

Image: The Energizer Headband Light highlighting its features: 2 light modes, shatterproof lens, non-slip grip, 100 lumens on high, and 19 hours run time on low.

Image: A woman wearing the Energizer Headband Light, demonstrating its soft, stretchy comfort during an activity.
O que hai na caixa
- One (1) Energizer Headband Light
- Two (2) Energizer MAX AAA Batteries

Image: The Energizer Headband Light packaging, showing one headband headlamp and two AAA alkaline batteries included.
Configuración
1. Instalación da batería
- Locate the battery compartment cover on the light unit. This is typically on the top surface of the light module.
- Gently open the battery compartment cover. If it is stiff, a small flat-head screwdriver may be used to carefully pry it open.
- Insert two (2) AAA batteries into the compartment, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
- Peche a tapa do compartimento da batería firmemente ata que encaixe no seu lugar.
2. Axustar a diadema
- The headband is designed to be soft and stretchy for comfort.
- Place the headband around your head so the light unit is positioned on your forehead.
- Adjust the band to achieve a snug yet comfortable fit. The band can adjust from approximately 5.5 inches to 14.25 inches in diameter.
- Ensure the light unit is stable and does not slip during movement. The non-slip grip on the inner side of the headband helps maintain position.
Instrucións de funcionamento
Acendido/apagado e selección de modo
The Energizer Headband Light features a single button for power control and mode cycling.
- Para activar: Press the power button located on the top of the light unit once. The light will activate in its default mode (High).
- Para cambiar os modos de ciclo: While the light is on, press the power button again to switch between the available light modes (High and Low).
- Para desactivar: Press the power button a third time to turn the light off.
The High mode provides up to 100 lumens of bright light, suitable for activities requiring maximum illumination. The Low mode offers extended runtime, up to 19 hours, for tasks requiring less intense light or to conserve battery life.

Imaxe: Primeiro plano view of the Energizer Headband Light, highlighting its slim design and the power button for operation.

Image: Visual representation of the light output, showing a brighter 'White Mode' and a softer 'Warm Mode', illustrating the different illumination options.

Image: A woman engaged in crafting, demonstrating the hands-free convenience of the Energizer Headband Light for indoor activities.
Mantemento
Substitución da batería
- When the light output diminishes significantly, it is time to replace the batteries.
- Siga os pasos de instalación da batería descritos no Configuración sección.
- Always replace both AAA batteries at the same time with new ones. Do not mix old and new batteries, or different types of batteries.
- Retire as pilas se non vai usar o dispositivo durante un período prolongado para evitar fugas.
Limpeza
- Wipe the light unit with a soft, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
- The headband can be hand-washed with mild soap and water, then air-dried. Ensure the light unit is removed or protected from water during cleaning of the band.
Almacenamento
- Store the headband light in a cool, dry place away from direct sunlight.
- Retire as pilas antes do almacenamento a longo prazo.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non acende. |
|
|
| A luz é tenue ou parpadea. |
|
|
| Headband slips during use. |
|
|
Especificacións
- Número de modelo: 039800139016
- Tipo de fonte de luz: LED
- Brillo branco: Up to 100 Lumens (High Mode)
- Tempo de execución: Up to 19 hours (Low Mode)
- Fonte de enerxía: Alimentado por batería
- Tipo de batería: 2 pilas alcalinas AAA (incluídas)
- Voltage: 3 voltios
- Material: Plástico
- Características especiais: Shatterproof Lens, Non-Slip Grip, Impact Resistant (up to 1 meter)
- Nivel de resistencia á auga: Non resistente á auga
- Peso do artigo: 2.89 onzas
- Dimensións do artigo (L x W x H): 1.89" x 2.36" x 4.53"
- Axuste da diadema: 5.5 inches to 14.25 inches in diameter
Información importante de seguridade
- AVISO DA BATERÍA: Keep away from children. If swallowed, promptly see doctor; have doctor phone 800-498-8666. Do not install backwards, charge, put in fire or mix with used or other battery types – may explode or leak causing injury. Replace all batteries at the same time.
- Do not look directly into the LED light as it can cause temporary vision impairment.
- This device is not water resistant. Avoid exposure to water or moisture.
- Do not attempt to disassemble or modify the light unit. This will void any potential warranty and could cause damage or injury.

Image: Back of the product packaging, displaying important safety warnings and contact details.
Vídeo do produto
Video: An official product video from Energizer demonstrating the features and use cases of the Energizer Headband Light.
Garantía e Soporte
Información da garantía
The manufacturer's warranty description states "Not applicable." Please refer to your point of purchase for specific return or exchange policies.
Atención ao cliente
For questions or assistance, please visit the official Energizer website or contact their customer service. You can find more information at: www.energizer.com
For battery-related inquiries, you may contact the number provided in the battery warning: 800-498-8666.