Techage Solar Battery Powered Metal Fake Security Camera Instruction Manual

1. Produto rematadoview

The Techage Solar Battery Powered Metal Fake Security Camera is designed to provide a visual deterrent against potential intruders, mimicking the appearance and some functionalities of a real security camera. It features solar charging, motion-activated floodlights, and a realistic design to enhance your property's perceived security without the complexity or cost of a full surveillance system.

Image: Two white Techage fake security cameras with integrated solar panels, designed to look like real surveillance equipment.

Características principais:

• Aspecto realista: Designed to closely resemble actual security cameras, complete with a dummy antenna and a flashing red LED light.
• Focos activados por movemento: Equipped with 8 LED floodlights that automatically turn on for 20 seconds when motion is detected within 28-32 feet at night, providing an 800 lumen super brightness.
• Alimentación solar: Features a built-in solar panel for continuous charging, eliminating the need for wiring or battery replacement.
• Fácil instalación: No complex wiring required; mounts easily to walls, ceilings, or other surfaces with included screws and a drilling template.
• Duradeiro e resistente ás inclemencias meteorolóxicas: Constructed with a metal casing and IP66 waterproof and dustproof performance, suitable for outdoor use in temperatures ranging from -20°F to 160°F.

2. Configuración e instalación

Follow these steps for optimal placement and installation of your Techage Fake Security Camera:

1. Escolla localización: Select a prominent outdoor location where the camera will be visible to deter potential intruders. Ensure the solar panel receives ample direct sunlight throughout the day for efficient charging.
2. Preparación para a montaxe: Use the provided drilling template to mark the screw holes on your desired mounting surface (wall, ceiling, etc.).
3. Perforación: Pre-drill holes at the marked locations.
4. Achegar base: Secure the camera's mounting base to the surface using the included screws.
5. Axustar ángulo: Adjust the camera and solar panel to the desired angle. The camera offers 360° rotation and 90° tilt, while the solar panel can be adjusted 150° for optimal sun exposure.
6. Conectar a antena: Screw the dummy antenna onto the designated port on either side of the camera for a more realistic appearance.

Image: Detailed diagram illustrating the components and dimensions of the Techage fake security camera, including the solar panel, dummy antenna, LED lights, PIR motion sensor, and red LED light.

Image: Illustration demonstrating the adjustable angles of the camera body (360° rotation, 90° tilt) and the solar panel (150° adjustment) for flexible positioning.

Vídeo de instalación:

Vídeo: Un desembalaxe e instalación rematadosview of the Techage Solar Powered Floodlights Dummy Camera, demonstrating its components and ease of setup.

3. Instrucións de funcionamento

The Techage Fake Security Camera operates autonomously once installed and charged. Its primary functions are to deter and illuminate.

Carga solar:

• The integrated solar panel charges the internal battery during daylight hours. Ensure the panel is positioned to receive maximum direct sunlight.
• No manual charging or battery replacement is typically needed under normal sunlight conditions.

Image: A visual representation of the 800 lumen super brightness provided by the floodlights, illuminating a path at night.

Focos activados por movemento:

• At night, the built-in PIR motion sensor detects movement within a range of 28-32 feet.
• Upon detection, the 8 LED floodlights will automatically activate, providing 800 lumens of bright illumination for approximately 20 seconds.
• The floodlights will turn off automatically after 20 seconds if no further motion is detected.

Image: A sequence of illustrations demonstrating the camera's operational modes: standby with a red light, motion detection activating the floodlight, and the floodlight turning off after a set period.

LED vermello intermitente:

• A small red LED light on the camera will flash continuously in standby mode, simulating the recording indicator of a real camera.

Demostración da operación:

Video: A short demonstration of the fake camera's motion-activated floodlight turning on at night as a person approaches.

4. Mantemento

To ensure the longevity and optimal performance of your Techage Fake Security Camera, consider the following maintenance tips:

• Panel solar limpo: Limpe periodicamente o panel solar cun pano suave eamp un pano para eliminar o po, a sucidade ou os residuos que poidan obstruír a luz solar e reducir a eficiencia da carga.
• Inspeccionar montaxe: Regularly check the mounting screws and bracket to ensure the camera remains securely attached, especially after severe weather conditions.
• Resistencia á intemperie: The camera is IP66 waterproof and designed to withstand various weather conditions. However, extreme conditions may still impact performance.

Image: The fake security camera shown in a rainy environment, highlighting its IP66 waterproof and dustproof capabilities.

5 Solución de problemas

If you encounter any issues with your fake security camera, try the following troubleshooting steps:

• Floodlights Not Activating:
  • Ensure the camera's solar panel is receiving sufficient direct sunlight for charging. A full day of sunlight is typically needed for optimal night operation.
  • Verify that the motion sensor is not obstructed.
  • Test the motion sensor by walking within its detection range (28-32 ft) at night.
• Red LED Not Flashing:
  • Confirm the camera has been exposed to adequate sunlight for charging.
  • Check if the power button (if present and accessible) is in the 'on' position.
• Camera Appears Less Realistic:
  • Ensure the dummy antenna is securely attached.
  • Clean the camera lens and body to remove any dirt or grime that might diminish its realistic appearance.

Para problemas persistentes, consulte a sección de soporte.

6. Especificacións

7. Garantía e soporte

Información da garantía:

Specific warranty details for the Techage Solar Battery Powered Metal Fake Security Camera should be obtained directly from the manufacturer or your point of purchase. Please retain your proof of purchase for any warranty claims.

Atención ao cliente:

Techage offers free technical support for their products. For assistance with installation, operation, or troubleshooting, please contact Techage customer service. You may also find useful resources and FAQs on the official Techage brand store or through the VicoHome App, which is associated with Techage products.

Soporte técnico gratuíto

VicoHome App Support