1. Introdución
Welcome to the EPEVER IPower-Plus Series IP3000-12 Plus Pure Sine Wave Inverter. This manual provides essential information for the safe and efficient operation of your inverter. The IPower-Plus series is designed to convert 12V DC battery power into 230V AC pure sine wave electricity, suitable for various applications including off-grid home emergency lighting and vehicle-mounted systems.
Key features include a 180-degree rotatable LCD display, compatibility with lithium batteries, and a USB output port. The inverter incorporates surge current suppression technology to protect lithium battery cells and the Battery Management System (BMS) from damage caused by high inrush currents. It also features low idle loss and a sleep mode for enhanced energy efficiency.
2. Instrucións de seguridade
WARNING: Failure to follow these safety instructions may result in serious injury, death, or damage to the inverter and other equipment.
- Read this entire manual before installation and operation.
- A instalación debe ser realizada por persoal cualificado.
- Garantir unha ventilación adecuada ao redor do inversor para evitar o sobreenriquecido.
- Do not expose the inverter to water, rain, snow, or any liquids.
- Connect the inverter to a battery bank with the correct voltage (12 V CC).
- Observe correct polarity when connecting DC input cables (+ to + and - to -). Reverse polarity will cause damage.
- Ensure all connections are tight and secure to prevent loose connections and arcing.
- Do not connect the inverter to an AC utility grid or other AC power sources.
- Avoid short-circuiting the AC output.
- Manteña os materiais inflamables lonxe do inversor.
- Non abra o inversor casing; non hai pezas no interior que o usuario poida reparar.
- Desconecte sempre a alimentación antes de realizar calquera mantemento ou limpeza.
3. Produto rematadoview
3.1 Características
- Saída de onda sinusoidal pura: Ofrece alimentación CA de alta calidade axeitada para electrónica sensible.
- 180-Degree Rotatable LCD Display: Permite flexibilidade viewing angles of operational data.
- Compatibilidade con baterías de litio: Designed to work effectively with lithium battery systems.
- Saída USB: Integrated 5VDC / Max.1A USB port for charging small devices.
- Surge Current Suppression: Protects battery cells and BMS from high inrush currents.
- Low Idle Loss / Sleep Mode: Minimizes power consumption when no load or light load is present.
- Isolated RS485 Communication Interface: (Optional) Enables remote monitoring, management, and settings adjustment via PC software or mobile app.
3.2 Compoñentes
The EPEVER IPower-Plus Series IP3000-12 Plus inverter includes the main unit and necessary connection accessories.
Figura 1: Fronte view of the EPEVER IPower-Plus Series IP3000-12 Plus Pure Sine Wave Inverter. This image shows the main body of the inverter with its LCD display and branding.
Figure 2: Rear panel of the EPEVER IPower-Plus Series IP3000-12 Plus inverter. This view highlights the DC input terminals, AC output terminals, USB port, and RS485 communication port.
Figura 3: Abaixo view of the EPEVER IPower-Plus Series IP3000-12 Plus inverter, showing the integrated cooling fans for thermal management.
Compoñentes incluídos:
- Unidade inversora
- RS485 Communication Port (integrated)
- USB Output (integrated)
- Cable de terra
- Cable de entrada de CC
- Cable de saída de CA
4. Configuración
4.1 Desembalaxe e inspección
- Desembale con coidado o inversor e todos os accesorios.
- Inspect the unit for any visible damage that may have occurred during shipping. Contact your supplier if any damage is found.
- Verify that all components listed in Section 3.2 are present.
4.2 Montaxe
- Choose a dry, well-ventilated location away from direct sunlight, heat sources, and moisture.
- Ensure there is sufficient clearance around the inverter for proper airflow, especially around the cooling fans.
- Mount the inverter securely to a stable surface using appropriate fasteners. The mounting dimensions are 532 x 145mm.
4.3 Conexións de cableado
CAUTION: Before making any connections, ensure the inverter is switched OFF and the battery bank is disconnected or fused.
- Conexión a terra: Connect the ground terminal of the inverter to an earth ground point using the provided ground cable. This is crucial for safety.
- Conexión de entrada de CC:
- Connect the positive (+) terminal of your 12V DC battery bank to the positive (+) DC input terminal on the inverter.
- Connect the negative (-) terminal of your 12V DC battery bank to the negative (-) DC input terminal on the inverter.
- Use appropriate cable gauge for the DC input to minimize voltage drop and ensure safe operation.
- Conexión de saída de CA:
- Connect your AC loads (appliances) to the AC output terminals of the inverter.
- Ensure the total power consumption of your AC loads does not exceed the inverter's continuous power rating (3000W).
- Optional Connections (RS485 & USB):
- If using the RS485 communication feature, connect the RS485 cable to the designated port for remote monitoring.
- The USB port can be used to charge compatible 5VDC devices.
5. Instrucións de funcionamento
5.1 Acendido do inversor
- After all connections are securely made and verified, connect the battery bank (if not already connected).
- Switch on the DC input breaker or fuse, if installed.
- Press the power button on the inverter. The LCD display will illuminate, indicating the inverter is operational.
- The inverter will begin converting DC power to AC power.
5.2 Powering Off the Inverter
- Turn off all connected AC loads.
- Press and hold the power button on the inverter until the display turns off.
- Switch off the DC input breaker or fuse, and disconnect the battery bank if the inverter will not be used for an extended period.
5.3 Pantalla LCD
The LCD display provides real-time operational data. It can be rotated 180 degrees for optimal viewing. Information typically displayed includes:
- Entrada DC Voltage
- Saída AC Voltage
- Potencia de saída (vatios)
- Frecuencia de saída (Hz)
- Estado da batería
- Códigos de erro (se os houber)
6. Mantemento
Un mantemento regular garante a lonxevidade e o rendemento óptimo do seu inversor.
- Limpeza: Periodically clean the exterior of the inverter with a dry cloth to remove dust and debris. Ensure cooling vents are clear. Do not use liquid cleaners.
- Comprobacións de conexión: Annually inspect all electrical connections (DC input, AC output, ground) to ensure they are tight and free from corrosion. Loose connections can cause overheating and damage.
- Ventilación: Ensure the area around the inverter remains clear and well-ventilated. Check that the cooling fans are operating correctly when the inverter is under load.
- Mantemento da batería: Follow the manufacturer's guidelines for your specific battery type. Ensure batteries are properly charged and maintained to prolong their lifespan and ensure stable power supply to the inverter.
7 Solución de problemas
This section outlines common issues and their potential solutions. If the problem persists, contact customer support.
| Problema | Causa posible | Solución |
|---|---|---|
| No AC Output / Inverter not turning on | Batería baixa voltage Loose DC connections Desactivación do inversor Blown DC fuse/breaker | Charge battery or check battery health Check and tighten all DC connections Acenda o interruptor do inversor Check and replace fuse/reset breaker |
| Overload Alarm / Shutdown | Connected load exceeds inverter rating High inrush current from inductive loads | Reduce total connected load Start inductive loads one at a time; consider a higher capacity inverter if frequent |
| Overheating Alarm / Shutdown | Ventilación deficiente Temperatura ambiente excesiva Continuous high load | Ensure clear airflow around inverter Relocate inverter to a cooler environment Reduce load or operate intermittently |
| Abnormal AC Output Voltage / Frecuencia | Vol. de entrada de CC baixotage Faulty inverter | Comprobar vol. bateríatage e conexións Póñase en contacto co servizo de atención ao cliente |
| O porto USB non funciona | Overload on USB port Faulty USB device | Disconnect and reconnect USB device Try a different USB device |
7.1 Funcións de protección
The inverter is equipped with extensive protection features:
- Protección contra polaridade inversa: Prevents damage from incorrect DC input wiring.
- Sobrevoltage Protección: Shuts down if DC input voltage supera os límites de seguridade.
- Sub-voltage Protección: Shuts down to protect batteries from over-discharge.
- Protección contra sobrecarga: Shuts down if AC output load exceeds rated capacity.
- Protección contra curtocircuítos: Protects against damage from AC output short circuits.
- Protección contra sobretemperatura: Apágase se a temperatura interna se fai demasiado alta.
8. Especificacións
| Parámetro | Valor |
|---|---|
| Vol. da batería do sistematage | 12V DC |
| Potencia Continua | 3000 W |
| Surge Power (5s) | 6000 W |
| Saída AC Voltage | 220VAC (±3%); 230VAC (-7% ~ +3%) |
| Frecuencia de saída | 50 / 60Hz ±0.2% |
| Máxima eficiencia | >94% (30% load) |
| Corrente sen carga | <1.6A |
| Saída USB | 5VDC / Max.1A |
| RS485 Interface Output | 5VDC/200mA |
| Clase de protección | IP20 |
| Dimensións (L x W x H) | 557 × 231.5 × 123 mm |
| Dimensións de montaxe | 532 x 145 mm |
| Peso neto | 10.5 kg |
| Forma de onda de saída | Pura Sine Wave |
| Certificacións | CE, RoHS |
9. Garantía e soporte
9.1 Información da garantía
The EPEVER IPower-Plus Series IP3000-12 Plus Pure Sine Wave Inverter comes with a 2 anos de garantía do fabricante desde a data de compra. Esta garantía cobre defectos de materiais e fabricación en condicións de uso e mantemento normais.
A garantía non cobre:
- Damage caused by improper installation or wiring.
- Danos causados por reparacións ou modificacións non autorizadas.
- Damage caused by natural disasters, accidents, or misuse.
- Damage from operating the inverter outside its specified environmental limits.
9.2 Soporte técnico
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your EPEVER dealer or the official EPEVER customer support channel. Please have your product model number and purchase information ready when contacting support.