iMaihom 130W LED Flood Light (Model BDD130D-3) Instruction Manual

Produto rematadoview

The iMaihom 130W LED Flood Light (Model BDD130D-3) is designed for outdoor illumination, featuring a dusk-to-dawn photocell sensor and three adjustable light heads. This unit provides high brightness and is built for durability in various weather conditions.

• Alto Brillo: Equipped with 154 high-quality LED chips, producing up to 13000 lumens.
• Funcionalidade do anoitecer ao amencer: Built-in sensitive photocell sensor automatically turns the light on at nightfall and off at daybreak.
• Cabezas axustables: Three light heads can be rotated to different angles, covering a wide lighting area up to 1850 sq. ft.
• Construción duradeira: IP65 waterproof rating and full aluminum body ensure resistance to rain, sleet, snow, and efficient heat dissipation.

O que hai na caixa

Verifique que estean presentes todos os compoñentes antes de comezar a instalación.

• iMaihom 130W LED Flood Light Unit
• Black Silicone Cap (for switch-controlled mode)
• Mounting Hardware (screws, anchors, wire nuts)

Configuración e instalación

This flood light is designed for hardwired installation to a junction box. Ensure power is turned off at the circuit breaker before beginning installation.

Pasos de instalación:

1. Prepare a superficie de montaxe: Identify a suitable junction box location on a wall or under eaves/soffits. Ensure the junction box is waterproof for outdoor use.
2. Coloque a placa de montaxe: Fixe a placa de montaxe á caixa de conexións usando os parafusos proporcionados.
3. Conexións de cable: Conecta os cables do reflector á instalación eléctrica da túa casa:
   • Black wire (Live) to Black wire
   • White wire (Neutral) to White wire
   • Green/Yellow wire (Ground) to Green/Ground wire
   Use the provided wire nuts to secure connections.
4. Montar a luminaria: Align the flood light fixture with the mounting plate and secure it with the central screw.
5. Seal the Fixture: Ensure the gasket is properly seated to maintain the IP65 waterproof rating.
6. Axustar os cabezales das luces: Loosen the screws on the side of each light head to adjust their angle as needed. Tighten screws to secure the position.
7. Restaurar enerxía: Conecte a alimentación no interruptor.

Figure 1: Hardwired Installation Steps. Shows the three steps for connecting the light to a junction box.

Figure 2: Eave and Wall Installation Examples. Demonstrates the versatility of mounting options.

Figure 3: Adjustable Heads and Photocell. Illustrates the rotational capability of the light heads and the location of the photocell.

Modos de funcionamento

The iMaihom 130W LED Flood Light offers two operating modes:

1. Dusk-to-Dawn Mode (Default)

In this mode, the built-in photocell sensor automatically detects ambient light levels. The light will turn on when it gets dark (nightfall) and turn off when it gets bright (daybreak).

• No manual intervention required.
• Energy efficient operation.

Figure 4: Dusk-to-Dawn Operation. The light automatically activates at dusk and deactivates at dawn.

2. Switch-Controlled Mode

To operate the light manually via a wall switch, cover the photocell sensor with the provided black silicone cap. This disables the automatic dusk-to-dawn function, allowing you to control the light with your existing wall switch.

• Allows manual ON/OFF control.
• Ideal for situations where continuous lighting is not desired or specific timing is needed.

Figure 5: Switching to Manual Control. Instructions for using the black silicone cap to enable switch-controlled operation.

Mantemento

The iMaihom 130W LED Flood Light requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Limpeza: Periodically clean the light heads and photocell sensor with a soft, damp un pano para eliminar a sucidade, o po ou os residuos. Non empregue produtos de limpeza abrasivos nin disolventes.
• Inspección: Regularly inspect the wiring and mounting for any signs of wear, damage, or loose connections. Address any issues promptly.
• Photocell Obstruction: Ensure the photocell sensor is not obstructed by leaves, dirt, or other objects, as this can interfere with its automatic operation.

Resolución de problemas

Especificacións

Garantía e Soporte

The iMaihom 130W LED Flood Light (Model BDD130D-3) comes with a 2 ano de garantía from the manufacturer. For technical support, warranty claims, or further assistance, please contact iMaihom customer service through their official websitio web ou o vendedor onde se comprou o produto.

For more information about iMaihom products, visit the iMaihom Store on Amazon.

Vídeos de produtos