1. Produto rematadoview
The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.
Características principais:
- High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
- Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
- Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
- Acceso multimedia: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Especificacións
| Característica | Especificación |
|---|---|
| Marca | AeroCool |
| Nome do modelo | HEXFORMBKV2 |
| Tipo de caso | Mini-tower |
| Compatibilidade da placa base | Micro ATX, Mini ITX |
| Dimensións (D x W x H) | 37.7 x 35.8 x 20.7 cm |
| Peso | 2 quilogramos |
| Material | Metal |
| Método de arrefriamento | Aire, Auga |
| Ventiladores preinstalados | 3 (FRGB, 120mm) |
| Lonxitude máxima da GPU | 296 mm (without front radiator) |
| Altura máxima do refrigerador da CPU | 159 mm |
| Baxas de unidades internas | 3 (3.5 inches compatible) |
| Ranuras de expansión | 6 |
| Portos de E / S dianteiros | 1x USB 3.0, 2x USB 2.0, Microphone, HD Audio, Reset, Power |

3. Guía de configuración
Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.
3.1 Desembalaxe
- Retire con coidado a carcasa do PC da súa embalaxe.
- Remove any protective films or internal packaging materials.
- Coloque a caixa sobre unha superficie estable e plana.
3.2 Instalación da placa base
- Retire o panel lateral de vidro temperado desenroscando os parafusos de polgada.
- Instala a protección de E/S (se non está preinstalada na placa base) na abertura traseira da caixa.
- Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
- Fixe a placa base cos parafusos proporcionados.
3.3 Instalación da fonte de alimentación
- Locate the power supply mounting area at the bottom rear of the case.
- Slide your power supply unit (PSU) into the designated bay.
- Fixe a fonte de alimentación con parafusos na parte traseira da caixa.
3.4 Instalación da unidade de almacenamento
- Identify the 3.5-inch drive bays within the case.
- Mount your hard drives or SSDs into the appropriate bays and secure them with screws.
3.5 Expansion Card (GPU) Installation
- Retire as tapas das ranuras de expansión necesarias da parte traseira da caixa.
- Insira a súa tarxeta gráfica ou outras tarxetas de expansión nas ranuras PCIe da súa placa base.
- Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).
3.6 Sistema de refrixeración
The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.
3.7 Xestión de cables
Utiliza os recortes para o paso de cables e os puntos de suxeición que hai detrás da bandexa da placa base para organizar os cables. Isto mellora a circulación do aire e a estética.

4. Instrucións de funcionamento
4.1 Acendido/Apagado
- To power on your PC, press the Poder botón situado no panel superior.
- To power off, either shut down through your operating system or press and hold the Poder botón durante uns segundos.
4.2 Front Panel I/O Ports
The top panel provides convenient access to various ports:
- Porto USB 3.0 (x1): Para a transferencia de datos a alta velocidade.
- Portos USB 2.0 (x2): Para conectar periféricos.
- Conector de micrófono: Para entrada de audio.
- HD Audio Jack: For audio output (headphones/speakers).
- Botón de reinicio: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.
4.3 FRGB Fan Control
The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Mantemento
Un mantemento regular axuda a garantir un rendemento óptimo e unha maior duración dos compoñentes do teu PC.
5.1 Limpeza do filtro de po
- The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
- Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
- Use compressed air or a soft brush to remove dust.
5.2 Limpeza xeral
- Limpe o exterior da carcasa cun pano suave eamp pano. Evite produtos de limpeza abrasivos.
- For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.
6 Solución de problemas
If you encounter issues with your PC case, consider the following common troubleshooting steps:
- Sen enerxía: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
- Os ventiladores non xiran/O RGB non funciona: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
- Sobrequecemento: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
- Os portos do panel frontal non funcionan: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.
For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.
7. Garantía e soporte
7.1 Información da garantía
The AeroCool HEXFORMBKV2 PC case comes with a 2 ano de garantía for parts. Please retain your proof of purchase for warranty claims.
7.2 Soporte técnico
For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's websitio ou na embalaxe do produto.
- AeroCool Official Websitio: www.aerocool.io
- Correo electrónico de atención ao cliente: support@aerocool.io (Example, please verify on official websitio)