Pro-Line Racing 1/10 Ford Bronco R Clear Body (PRO358600) Instruction Manual

1. Información de seguridade

AVISO: Lea o manual de instrucións COMPLETO para familiarizarse coas características do produto antes de utilizalo. Se non opera o produto correctamente, pode causar danos no produto, bens persoais e lesións graves. Este é un produto sofisticado para afeccionados. Debe operarse con precaución e sentido común e require algunhas habilidades mecánicas básicas. Se non opera este produto dun xeito seguro e responsable, pode provocar lesións ou danos no produto ou noutros bens. Este produto non está destinado ao uso por parte de nenos sen a supervisión directa dun adulto. Non o use con compoñentes incompatibles nin altere este produto de ningún xeito fóra das instrucións proporcionadas por Horizon Hobby, LLC. O manual do produto contén instrucións de seguridade, funcionamento e mantemento. É esencial ler e seguir todas as instrucións e advertencias do manual antes da montaxe, configuración ou uso para funcionar correctamente e evitar danos ou lesións graves.

2. Produto rematadoview

The Pro-Line Racing 1/10 Ford Bronco R Clear Body (PRO358600) is designed for short course remote control trucks. This clear body allows for custom painting and detailing to replicate the Ford Bronco R race prototype. It includes an add-on spoiler and rear cage/taillights for enhanced realism.

Características:

• Fully Licensed Ford Bronco R Clear Body
• Transforms your short course truck into an off-road racer
• Based on Ford’s Race Prototype Truck
• Includes add-on spoiler and rear cage/taillights
• Feito nos EUA

Que está incluído:

• Pro-Line Racing 1/10 Ford Bronco R Clear Body: Short Course, PRO358600

3. Configuración e preparación

This section outlines the steps for preparing your new clear body for use on your RC vehicle.

3.1 Inspecting the Body

Upon receiving your Pro-Line Ford Bronco R clear body, carefully inspect it for any manufacturing defects or shipping damage.

Image: The clear, unpainted Pro-Line Racing 1/10 Ford Bronco R body as it appears out of the packaging.

3.2 Trimming the Body

Carefully cut along the molded trim lines of the body using sharp hobby scissors or a body reamer. Pay close attention to wheel wells and edges for a clean finish.

3.3 Painting and Detailing

Before painting, clean the inside of the body with mild soap and water, then dry thoroughly. Mask off windows and any areas you do not wish to paint. Apply RC-specific polycarbonate paint to the inside of the body for durability. Allow each coat to dry completely before applying the next.

Image: A fully painted Pro-Line Ford Bronco R body, showcasing the front design and details.

Imaxe: Un lado view of the painted Pro-Line Ford Bronco R body, highlighting the profile and wheel arches.

Imaxe: A parte traseira view of the painted Pro-Line Ford Bronco R body, showing the integrated spoiler and taillight details.

3.4 Applying Decals

Once the paint is dry, remove all masking. Apply the included decal sheet to add realistic details such as headlights, taillights, grilles, and sponsor logos. Use a hobby knife for precise placement.

Image: The decal sheet included with the Pro-Line Ford Bronco R body, featuring various logos and details.

3.5 Mounting the Body

Align the body with your short course truck's body posts. Mark and drill holes for the body posts. It is recommended to use extended body mounts for optimal fitment, especially with larger tires. Secure the body using body clips.

Image: The Pro-Line Ford Bronco R body mounted on a remote control short course truck, viewed from a front angle.

Image: The Pro-Line Ford Bronco R body mounted on a remote control short course truck, viewed from a side angle.

Image: The Pro-Line Ford Bronco R body mounted on a remote control short course truck, viewed from a rear angle.

4. Consideracións operativas

The Pro-Line Ford Bronco R body is designed for 1/10 scale short course trucks. Ensure your vehicle's chassis and suspension are compatible with the body's dimensions (20.9"D x 10.3"W x 6.2"H). Proper body mounting prevents interference with moving parts and ensures optimal performance and durability.

Image: Diagram illustrating the dimensions (length, width, height) of the Pro-Line Ford Bronco R body.

5. Mantemento

To maintain the appearance and longevity of your body, follow these guidelines:

• Limpeza: Limpa co anuncioamp cloth after use to remove dirt and debris. Avoid harsh chemicals that may damage the paint or plastic.
• Almacenamento: Store the body in a cool, dry place away from direct sunlight to prevent fading or warping.
• Inspección: Regularly inspect the body for cracks or damage, especially after impacts. Repair minor cracks with appropriate polycarbonate repair tape or adhesive to prevent further damage.

6 Solución de problemas

This section addresses common issues you might encounter with your RC body.

• Body Rubbing Tires: If the body rubs against the tires during suspension travel or steering, check if extended body mounts are needed. Trim wheel wells further if necessary.
• Body Cracking: Polycarbonate bodies can crack upon impact. For minor cracks, use clear polycarbonate repair tape on the inside of the body. For severe damage, replacement may be necessary.
• Decals Peeling: Ensure the body surface was clean and dry before decal application. If peeling occurs, re-apply with a strong adhesive or replace the decal.
• Mala adaptación: Double-check that the body posts are correctly aligned and that the body is designed for your specific short course truck model. Some customization of body post holes may be required.

7. Especificacións

8. Garantía e soporte

For warranty information or technical support regarding your Pro-Line Racing product, please refer to the official Pro-Line Racing websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o recibo da compra como proba de compra.

Visit Pro-Line Racing Official Websitio