Beleeb Adjustable Battery Charger User Manual

1. Introdución

Thank you for choosing the Beleeb Adjustable Battery Charger, Model BLB-C30. This versatile charger is designed to efficiently charge and maintain a wide range of battery types and voltages, from 12V to 72V. It features a smart LCD display, pulse repair capabilities, and desulfation technology to extend battery life. Please read this manual thoroughly before operation to ensure safe and optimal performance.

2. Información de seguridade

ADVERTENCIA: Lea todas as advertencias e instrucións de seguridade. O incumprimento das advertencias e instrucións pode producir descargas eléctricas, incendios e/ou lesións graves.

• Always wear appropriate personal protective equipment, including eye protection and gloves, when working with batteries.
• Ensure adequate ventilation during charging to prevent the buildup of explosive gases.
• Non expoña o cargador a choivas nin a condicións de humidade.
• Never attempt to charge a frozen or damaged battery.
• Ensure the charger is disconnected from the AC power outlet before making or breaking connections to the battery.
• Keep the charger and battery away from open flames, sparks, and heat sources.
• This charger is for charging lead-acid (SLA, AGM, GEL, Deep Cycle) and LiFePO4 batteries with Battery Management Systems (BMS) only. Do not use for other battery types.

3. Produto rematadoview

3.1 Compoñentes e controis

• Pantalla LCD: Mostra o volume en tempo realtage, amperage, and error codes.
• Luz indicadora: Red for charging, Green for fully charged.
• Interruptor de alimentación: ON/OFF switch for the unit.
• Level Volt Knob: Selects the charging voltage (12V, 24V, 36V, 48V, 60V, 72V) and 'H' mode for pulse repair/equalization.
• Ampere Control Knob: Adjusts the charging current (Low, Medium, High).
• Terminais de saída: Positive (+) and Negative (-) connections for battery clamps.
• Overload Reset Button: Resets the charger in case of an overload.
• Entrada AC: Power cord connection (110V, 50/60Hz).

4. Configuración e conexión

Follow these steps to safely connect your battery charger:

1. Ensure the charger's power switch is in the DESACTIVADO posición.
2. Connect the red (positive) battery clamp ao terminal positivo (+) da batería.
3. Connect the black (negative) battery clamp ao terminal negativo (-) da batería.
4. Plug the charger's AC power cord into a standard 110V, 50/60Hz electrical outlet.
5. Seleccione o vol. Axeitadotage no Level Volt Knob that matches your battery's voltage.
6. Turn the charger's power switch to the ON position. The red indicator light will illuminate, and the LCD display will show the charging status.

5. Instrucións de funcionamento

5.1 voltage Selección

O Level Volt Knob allows you to select the appropriate voltage for your battery pack. Ensure the selected voltage matches your battery's nominal voltage (e.g., 12V, 24V, 36V, 48V, 60V, 72V). If an incorrect voltage is selected, the charger may stop charging after a few seconds to protect your battery. To restart, adjust the knob to the correct voltage and cycle the power switch.

5.2 AmpControl de era

Usa o Ampere Control Knob to select the charging current: BAIXO, MEDIO, ou ALTO. A lower current provides a slower, more thorough charge, which is beneficial for battery health and desulfation. A higher current offers faster charging.

5.3 Pulse Repair (H Mode) and Desulfation

The 'H' position on the Level Volt Knob activates the pulse repair and desulfation mode. This mode applies high-voltage pulses to break up sulfate crystals that can build up on lead-acid battery plates, restoring lost battery performance and extending battery lifespan. This mode also functions as an equalizing charge, balancing individual cells within a battery pack.

5.4 Charging Process and Indicators

The charger utilizes a multi-stage charging process to optimize battery health and charging efficiency:

• Stage 1: Deep Discharge Charging Pulse Mode: For deeply discharged batteries.
• Stage 2: Constant Current Mode (CC): Current is constant, voltage aumenta lentamente.
• Stage 3: Constant Voltage Mode (CV): Voltage is constant, current slowly reduces.
• Stage 4: Standby VoltagModo e: Current slowly reduces to zero, maintaining the battery.

O Pantalla LCD shows real-time voltage e ampera. O Luz indicadora will be red during charging and turn green when the battery is fully charged (current drops to 0 amps). The charger can be left connected indefinitely without harming the battery once fully charged.

6. Mantemento

• Limpeza: Desconecte o cargador da corrente e da batería. Limpe a superficie.asinLimpe cun pano suave e seco. Non empregue produtos de limpeza abrasivos nin disolventes.
• Coidado do cable: Inspect battery cables and clamps for damage before each use. Replace if frayed or broken.
• Almacenamento: Store the charger in a cool, dry place when not in use. Keep out of reach of children.

7 Solución de problemas

8. Especificacións

9. Garantía e soporte

Beleeb offers various protection plans for your product. Please refer to your purchase documentation for specific warranty details and terms. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Beleeb customer service.

Tamén está dispoñible para a súa descarga un manual de usuario oficial en formato PDF: Descargar o manual de usuario (PDF)