1. Introdución
Thank you for choosing the EQUATION SLIM Bathroom Fan. This manual provides essential information for the safe installation, operation, and maintenance of your new ventilation unit. Please read these instructions carefully before installation and retain them for future reference.
This fan is designed for intermittent air renewal in bathrooms, toilets, or kitchens up to 7 m². It effectively combats humidity and odors, contributing to a healthier indoor environment.
2. Información de seguridade
AVISO: Electrical appliances can be hazardous. Installation and maintenance must be performed by a qualified electrician in accordance with local wiring regulations and standards.
- Asegúrese de desconectar a fonte de alimentación antes da instalación, mantemento ou reparación.
- Do not install the fan in areas where it may be exposed to direct water spray.
- Este aparello non está pensado para o seu uso por persoas (incluídos nenos) con capacidades físicas, sensoriais ou mentais reducidas, ou con falta de experiencia e coñecementos, a menos que teñan supervisión ou instrucións sobre o uso do aparello por unha persoa responsable da súa seguridade. .
- Os nenos deben ser supervisados para asegurarse de que non xoguen co aparello.
- Non obstrua a entrada ou saída de aire.
- The fan must not be connected to a chimney flue or any other combustion product exhaust duct.
3. Produto rematadoview
3.1. Características clave
- Operación automática: Equipped with an adjustable humidity sensor and timer for automated ventilation.
- Ventilación eficiente: Suitable for rooms up to 7 m² with an airflow of 72 m³/h.
- Baixo nivel de ruído: Operates quietly at 32 dB(A) for minimal disturbance.
- Eficiencia enerxética: Low power consumption of 8 W.
- Antecedentes Damper: Includes a non-return flap to prevent outside air from entering the room.
- Motor duradeiro: Features a ball bearing motor for extended lifespan.
- Fácil instalación: Designed for wall mounting and includes a fixing kit.
3.2 Compoñentes
The EQUATION SLIM Bathroom Fan consists of the main fan unit, an integrated humidity sensor, a timer, and a backdraft damper. A fixing kit is supplied for installation.
Figura 1: Fronte view of the EQUATION SLIM Bathroom Fan. This image shows the square white casing with horizontal grilles covering the fan blades.
Figure 2: The fan unit with key specifications highlighted, including 32 dB(A) noise level, 8W power, 100mm diameter, and symbols for humidity sensor and timer. Below are icons indicating adjustable humidity (60-90%) and timer (2-30 minutes) settings.
4. Instalación
The fan is designed for wall or ceiling mounting. For electrical connections, it is strongly recommended to consult a qualified electrician to ensure compliance with all safety standards and regulations.
4.1. Comprobacións previas á instalación
- Verify that the power supply matches the fan's specifications (220-240V, 50Hz).
- Ensure the installation location allows for proper airflow and maintenance access.
- Confirm that the wall or ceiling material can support the fan's weight and allow for secure mounting.
- Prepare a circular opening of 100 mm diameter for the duct connection.
4.2. Pasos de montaxe
- Desconectar a enerxía: Desconecte a alimentación principal no disyuntor antes de comezar calquera traballo eléctrico.
- Marcar os puntos de perforación: Use the fan's mounting plate as a template to mark the drilling points on the wall or ceiling.
- Perforación: Fai buratos nos puntos marcados e introduce os tacos de parede proporcionados.
- Conexión eléctrica: Connect the electrical wires to the terminal block inside the fan unit. Ensure correct polarity (Live, Neutral, Earth if applicable). Refer to the wiring diagram provided with the product packaging.
- Montar o ventilador: Secure the fan unit to the wall or ceiling using the screws from the fixing kit.
- Install Backdraft Damper: Asegurar o backdraft damper is correctly positioned to prevent reverse airflow.
- Restaurar enerxía: Once installation is complete and all connections are secure, restore power to the circuit.
Figure 3: Dimensional drawing of the fan (149x149mm front, 97mm depth, 99mm duct length) and an illustration of the included fixing kit (screws and wall plugs).
Figure 4: The fan installed on a white wall, demonstrating a typical installation in a kitchen or utility area.
Figure 5: The fan installed on a white ceiling, demonstrating a typical overhead installation in a kitchen or utility area.
5. Instrucións de funcionamento
The EQUATION SLIM Bathroom Fan operates automatically based on its integrated humidity sensor and timer.
5.1. Humidity Sensor Adjustment
The humidity sensor can be adjusted to activate the fan when the ambient humidity level exceeds a set threshold. The adjustable range is typically between 60% and 90% relative humidity.
- To adjust, carefully remove the front cover of the fan.
- Locate the humidity adjustment dial (often marked with a '%' symbol).
- Turn the dial clockwise to increase the humidity threshold (fan activates at higher humidity) or counter-clockwise to decrease it (fan activates at lower humidity).
- Volva colocar a tapa frontal de forma segura.
5.2. Timer Adjustment
The timer function allows the fan to continue operating for a set period after the humidity level drops below the threshold or after the light switch (if wired to it) is turned off. The adjustable range is typically between 2 and 30 minutes.
- To adjust, carefully remove the front cover of the fan.
- Locate the timer adjustment dial (often marked with a 'min' or clock symbol).
- Turn the dial clockwise to increase the run-on time or counter-clockwise to decrease it.
- Volva colocar a tapa frontal de forma segura.
Nota: Always ensure power is disconnected before adjusting internal settings.
6. Mantemento
Unha limpeza regular garante un rendemento óptimo e prolonga a vida útil do teu ventilador.
- Desconectar a enerxía: Always turn off the power supply to the fan at the circuit breaker before cleaning.
- Quitar a tapa frontal: Carefully unclip or unscrew the front grille/cover.
- Clean Grille and Blades: Use un suave, damp cloth and mild detergent to clean the front grille and the fan blades. Avoid using abrasive cleaners or solvents.
- Vivenda limpa: Limpe a carcasa exterior con anuncioamp pano.
- Remontar: Ensure all parts are dry before reattaching the front cover.
- Restaurar enerxía: Once reassembled, restore power to the fan.
Frecuencia: Cleaning should be performed every 3-6 months, or more frequently in dusty or high-humidity environments.
7 Solución de problemas
Se tes problemas co teu ventilador, consulta os seguintes problemas e solucións comúns:
| Problema | Causa posible | Solución |
|---|---|---|
| O ventilador non se acende. | Sen fonte de alimentación. Cableado incorrecto. Humidity sensor setting too high. | Comprobe o disxuntor e a conexión de alimentación. Verify wiring with a qualified electrician. Adjust humidity sensor to a lower threshold. |
| O ventilador funciona continuamente. | Humidity sensor setting too low. Timer set for a long duration. Faulty sensor/timer. | Adjust humidity sensor to a higher threshold. Adjust timer to a shorter duration. Contact customer support if issues persist after adjustment. |
| Fluxo de aire reducido ou ruído inusual. | Blocked grille or fan blades. Compoñentes soltos. Problema motor. | Disconnect power and clean the grille and blades. Check for loose screws or parts (with power off). Ponte en contacto co servizo de atención ao cliente se o ruído persiste. |
| Backdraft of cold air. | Antecedentes damper obstructed or damaged. | Disconnect power and inspect the backdraft damper for obstructions or damage. Clear any blockages or replace if damaged. |
If the problem persists after attempting these solutions, please contact EQUATION customer support.
8. Especificacións
| Marca | ECUACIÓN |
| Número de modelo | 3276000607168 |
| Dimensións do produto (L x W x H) | 9.7 x 14.9 x 14.9 cm |
| Peso | 10 g |
| Poder | 8 vatios |
| Nivel de ruído | 32 Decibels (A) |
| Fluxo de aire | 72 m³/h |
| Tamaño da habitación recomendado | Ata 7 m² |
| Diámetro do conducto | 100 mm |
| Características especiais | Humidity Sensor, Timer, Backdraft Damper, Ball Bearing Motor |
| Tipo de montaxe | Soporte de parede |
9. Garantía e soporte
Specific warranty details are typically provided with the product packaging or can be found on the manufacturer's official websitio. Garde o comprobante de compra para calquera reclamación de garantía.
For technical support, spare parts, or further assistance, please contact EQUATION customer service through their official channels. Information regarding spare parts availability is not provided in this document.