Phanteks Revolt SFX 750W 80 PLUS Platinum Power Supply User Manual

1. Introdución

This manual provides essential information for the safe and efficient use of your Phanteks Revolt SFX 750W 80 PLUS Platinum power supply. This power supply is designed for small form-factor (SFX) chassis, offering high efficiency and a fully modular design for optimized cable management and system stability.

Image 1: Phanteks Revolt SFX 750W 80 PLUS Platinum Power Supply. This image shows the compact black power supply unit with its fan grille visible.

2. Información de seguridade

WARNING: Improper installation or use can result in serious injury or damage to your system components. Always follow these safety guidelines:

• Asegúrese de que a fonte de alimentación estea desconectada da toma de corrente alterna antes da instalación ou do mantemento.
• Non abra a fonte de alimentación. Alto volumetagOs cables están presentes no interior, mesmo cando están desconectados.
• Instale a fonte de alimentación nunha zona ben ventilada. Non bloquee o ventilador nin as aberturas de ventilación.
• Use only the modular cables provided with this power supply. Using incompatible cables can cause damage.
• Asegúrate dunha conexión a terra axeitada do teu sistema informático.
• Evite expoñer a fonte de alimentación á humidade ou a temperaturas extremas.

3. Contido do paquete

Verifica que todos os compoñentes estean presentes no paquete:

• Phanteks Revolt SFX 750W 80 PLUS Platinum Power Supply Unit
• Cable de alimentación de CA
• Modular Cable Set, including:
  • 1x 24-pin ATX Motherboard Cable (18+10pin to 24pin)
  • 4x 8-pin CPU/PCI-E Cables (8pin to CPU 8pin / PCI-E 8pin)
  • 3x 6-pin SATA/Molex Cables (6pin to SATA/Molex)
• Parafusos de montaxe
• Manual de usuario (este documento)

Note: The modular cables are flat ribbon cables designed for flexibility and ease of routing in compact chassis.

4. Configuración e instalación

Follow these steps to install your Phanteks Revolt SFX power supply:

1. Prepare Your Chassis: Ensure your computer chassis supports the SFX form factor. Remove any existing power supply.
2. Montar a fonte de alimentación: Carefully slide the Phanteks Revolt SFX PSU into the designated SFX power supply bay in your chassis. Secure it using the provided mounting screws.
3. Conectar cables modulares:
   • Cable de placa base ATX de 24 pines: Connect the 18+10pin end to the power supply and the 24-pin end to your motherboard.
   • CPU Power Cables: Connect the 8-pin end(s) to the power supply and the 4+4pin or 8-pin end(s) to your motherboard's CPU power connector(s).
   • PCI-E Power Cables: Connect the 8-pin end(s) to the power supply and the 6+2pin or 8-pin end(s) to your graphics card(s).
   • SATA/Molex Cables: Connect the 6-pin end(s) to the power supply and the SATA or Molex connectors to your storage drives and other peripherals.

   Ensure all cable connections are firm and properly seated. Utilize the flexibility of the flat ribbon cables for optimal routing and airflow within your chassis.

4. Conectar alimentación de CA: Once all internal connections are made, connect the AC power cord to the power supply's AC inlet and then to a wall outlet or surge protector.
5. Encendido: Flip the power switch on the back of the PSU to the 'ON' position. You can now power on your computer system.

5. Instrucións de funcionamento

The Phanteks Revolt SFX 750W power supply is designed for reliable and efficient operation.

• Eficiencia 80 PLUS Platinum: This power supply is certified 80 PLUS Platinum, ensuring high energy efficiency (up to 92% at 50% system load). This reduces heat generation and operating costs.
• Silent Fan Operation: The integrated 92mm Fluid Dynamic Bearing (FDB) fan features intelligent thermal control. It operates silently and optimizes cooling performance based on load.
• 0 RPM Mode: For ultimate silence, the fan will remain off when the system load is below 30%. This is normal operation. The fan will automatically activate as the load increases.
• Características de protección: The PSU includes multiple protection circuits to safeguard your components:
  • OPP (Overpower Protection)
  • OVP (Voltage Protección)
  • UVP (Baixo Voltage Protección)
  • SCP (Protección contra cortocircuitos)
  • OCP (Protección contra sobrecorriente)
  • OTP (Protección contra sobretemperatura)
  • No-Load Protection
  • Restablecer protección

6. Mantemento

Para garantir un rendemento óptimo e unha maior duración da súa fonte de alimentación, teña en conta os seguintes consellos de mantemento:

• Eliminación de po: Periodically clean dust from the power supply's fan grille and ventilation openings using compressed air. Ensure the PSU is powered off and disconnected from AC power before cleaning.
• Condicións ambientais: Operate the power supply within the specified temperature and humidity ranges (Operating Temp: 0 to 50°C; Operating Humidity: Up to 85% relative humidity, non-condensing).
• Xestión de cables Ensure cables are routed neatly to prevent obstruction of airflow within the chassis.

7 Solución de problemas

Se tes problemas coa fonte de alimentación, consulta os seguintes pasos comúns para a resolución de problemas:

• Sen enerxía:
  • Comprobe se o cable de alimentación de CA está conectado correctamente tanto á fonte de alimentación como á toma de corrente.
  • Asegúrate de que o interruptor de alimentación da parte traseira da fonte de alimentación estea na posición "ON".
  • Verifica que a toma de corrente funciona probándoa con outro dispositivo.
  • Confirm all modular cables (especially the 24-pin motherboard cable) are firmly seated at both the PSU and component ends.
• Inestabilidade/fallos do sistema:
  • Asegúrate de que os requisitos de alimentación do teu sistema non superen a capacidade de 750 W da fonte de alimentación.
  • Check for loose cable connections, particularly to the motherboard, CPU, and graphics card.
  • Verify that the PSU's ventilation is not obstructed, leading to overheating. The built-in OTP (Over Temperature Protection) may shut down the unit if it overheats.
• O ventilador non xira:
  • The PSU features a 0 RPM mode. The fan will not spin if the system load is below 30%. This is normal operation.
  • If the system is under significant load and the fan is still not spinning, ensure there are no obstructions to the fan blades.

If problems persist after following these steps, contact Phanteks customer support for further assistance.

8. Especificacións

9. Garantía e soporte

Garantía: This Phanteks Revolt SFX 750W 80 PLUS Platinum power supply is covered by a 1 anos de garantía do fabricante desde a data de compra. Conserve o comprobante de compra para reclamacións de garantía.

The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, accident, abuse, misuse, natural disaster, or unauthorized modification.

Atención ao cliente: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please visit the official Phanteks websitio web ou póñase en contacto directamente co servizo de atención ao cliente.

Oficial de Phanteks Websitio: www.phanteks.com