1. Introdución
This manual provides essential information for the assembly, operation, and maintenance of your tectake Canton Computer Desk 800993. Please read these instructions carefully before assembly and use to ensure safe and correct handling of the product. This computer desk is designed to provide a functional and stable workspace for home or office environments, featuring a spacious desktop and integrated side storage compartments.
Imaxe 1.1: Acabadoview of the tectake Canton Computer Desk 800993, showcasing its industrial light wood finish and integrated shelving.
2. Advertencias de seguridade
Warning: Assembly required. Exercise caution during mounting and when using the desktop.
- Asegúrese de que todos os compoñentes estean presentes e non estean danados antes de comezar a montaxe.
- Monta a mesa sobre unha superficie suave e limpa para evitar rabuñaduras.
- Non aperte demasiado os parafusos, xa que isto podería danar o material.
- Manteña as pezas pequenas lonxe dos nenos durante a montaxe.
- Comprobe periodicamente todos os elementos de fixación para asegurarse de que permanecen axustados.
- Non exceda as capacidades de carga máximas especificadas na sección "Especificacións".
- Avoid placing hot items directly on the desktop surface without protection.
3. Contido do paquete
Antes da montaxe, comproba que todas as pezas que se indican a continuación estean incluídas no paquete. Se falta algunha peza ou está danada, ponte en contacto co servizo de atención ao cliente.
- Desktop Panel (1)
- Steel Frame Components (various)
- Paneis laterais para estantes (2)
- Pés axustables (4)
- Ferraxes de montaxe (parafusos, pernos, chave Allen)
- Manual de instrucións (este documento)
4. Instrucións de montaxe
Follow these steps carefully to assemble your tectake Canton Computer Desk. It is recommended to have two people for assembly.
- Desembalar e identificar as pezas: Lay out all components on a clean, soft surface. Refer to the parts list to ensure everything is present.
- Montar a estrutura principal: Connect the long horizontal steel bars to the vertical leg frames using the provided screws and Allen key. Ensure all connections are secure but do not fully tighten yet.
- Attach Side Shelf Supports: Secure the steel supports for the side shelves to the main frame as indicated in the diagram.
- Install Side Shelf Panels: Slide and secure the two side shelf panels onto their designated supports.
- Attach Desktop Panel: Carefully place the desktop panel onto the assembled frame. Align the pre-drilled holes on the desktop with the holes on the frame. Secure the desktop using the appropriate screws.
- Instalar os pés axustables: Screw the four adjustable plastic feet into the bottom of the desk legs.
- Aperte e nivelación finais: Once all components are in place, fully tighten all screws. Adjust the plastic feet to ensure the desk is stable and level on your floor.
Imaxe 4.1: Detallada view of the integrated side shelves, illustrating their placement within the desk frame.
Imaxe 4.2: Un ángulo view of the assembled desk, showing the desktop attached to the steel frame and shelves.
Image 4.3: Close-up of an adjustable foot, demonstrating its leveling mechanism.
5. Directrices de funcionamento
- Colocación: Position the desk on a flat, stable surface. Avoid direct sunlight or extreme temperature changes to prevent material damage.
- Capacidade de carga: Do not exceed the maximum load capacity of 150 kg for the tabletop and 25 kg for each side compartment. Distribute weight evenly.
- Xestión de cables Utilize the space behind the desk for organizing cables to maintain a tidy workspace.
- Estabilidade: Regularly check the adjustable feet and tighten them if the desk becomes wobbly.
6. Mantemento e coidados
- Limpeza: Limpa as superficies do escritorio cun pano suave eamp pano. Evite produtos de limpeza abrasivos ou produtos químicos agresivos, xa que poden danar o acabado.
- Verquidos: Limpe os derrames inmediatamente para evitar manchas ou danos causados pola auga na madeira sintética.
- Fixadores: Periodically inspect all screws and bolts and tighten them as necessary to maintain structural integrity.
- Protección: Use coasters or protective pads under hot items or items that may scratch the surface.
7 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| O escritorio está inestable | Chan irregular; elementos de fixación soltos | Adjust the leveling feet; tighten all screws and bolts. |
| Faltan pezas ou están danadas | Erro de envío; defecto de fabricación | Contact tectake customer support with your purchase details. |
| Dificultade durante a montaxe | Incorrect step sequence; misaligned parts | Review the assembly instructions carefully; ensure parts are correctly oriented before tightening. |
8. Especificacións
- Modelo: 800993
- Marca: tectake
- Cor: Industrial Light Wood
- Material: Madeira enxeñadora, aceiro de aliaxe
- Total Dimensions (W x D x H): Aproximadamente 120 x 60 x 75.5 cm
- Top Side Compartments (W x D x H): Aproximadamente 20 x 58 x 34 cm
- Bottom Side Compartment (W x D x H): Aproximadamente 20 x 58 x 30 cm
- Steel Body Dimensions: Aproximadamente 2 x 2 cm
- Adjustable Plastic Feet Height: Aproximadamente 1.5 cm
- Capacidade de carga da mesa: 150 kg
- Each Side Compartment Load Capacity: 25 kg
- Peso do artigo: 15 kg
- Características especiais: Pés axustables
Image 8.1: Detailed diagram illustrating the dimensions of the tectake Canton Computer Desk.
9. Garantía e soporte
For warranty information, product support, or to report missing/damaged parts, please contact your retailer or the manufacturer, tectake. Please have your purchase receipt and model number (800993) available when contacting support.
Manufacturer: tectake
Seller: TecTake Sweden AB