Feit Electric LED Outdoor Security Flood Light (Model S9DFL/850/MOT/WH) User Manual

Introdución

Thank you for choosing the Feit Electric LED Outdoor Security Flood Light. This fixture is designed to provide bright, energy-efficient illumination with advanced motion sensing and dusk-to-dawn capabilities for enhanced outdoor security and convenience. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

Imaxe: Fronte view of the Feit Electric LED Outdoor Security Flood Light, showing its dual adjustable heads and motion sensor.

Información de seguridade

AVISO: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. Improper wiring can result in electric shock or fire.

• Todas as conexións eléctricas deben cumprir as normas locais e do Código Eléctrico Nacional (NEC).
• Consulte cun electricista cualificado se non ten dúbidas sobre os procedementos de cableado.
• Do not install near combustible materials or in areas with explosive atmospheres.
• Ensure the fixture is securely mounted to a structural surface.
• This fixture is rated for outdoor wet locations (IP65).

Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• LED Outdoor Security Flood Light Fixture
• Ferraxes de montaxe (parafusos, porcas para cables)
• Junta
• Manual de instrucións

Image: The Feit Electric LED Outdoor Security Flood Light, showing the main unit and its components.

Especificacións

Image: A graphic detailing key specifications of the Feit Electric LED Outdoor Security Flood Light, including wattage, lumens, color temperature, and IP rating.

Instrucións de instalación

1. Prepárese para a instalación

1. Apague a enerxía: Localice o disxuntor ou a caixa de fusibles e desconecte a alimentación da caixa de conexións onde se instalará o dispositivo.
2. Limpar a zona: Ensure the installation area is clear of obstructions and provides stable support for the fixture.

2. Montaxe do aparello

The fixture is designed for wall mounting. Use the provided mounting plate for secure installation.

1. Attach the mounting plate to the junction box using the provided screws. Ensure the plate is flush and secure.
2. Feed the electrical wires from the junction box through the center hole of the mounting plate.
3. Position the fixture against the mounting plate, ensuring the gasket is properly seated to prevent water intrusion.

Image: Illustration of the mounting back plate and screws, demonstrating the hands-free wiring design for easier installation.

3. Conexións de cableado

Connect the fixture wires to the household wiring using the provided wire nuts:

• Conecta o negro cable desde o aparello ata o negro cable (con tensión) da caixa de conexións.
• Conecta o branco cable desde o aparello ata o branco cable (neutro) da caixa de derivación.
• Conecta o verde cable (de terra) desde o aparello ata o verde ou cable de cobre espido (terra) da caixa de derivación.
• Asegúrate de que todas as conexións estean seguras e illadas con porcas para cables.

4. Secure the Fixture

Once wiring is complete, align the fixture with the mounting plate and secure it using the provided screws. Ensure a tight seal to maintain the IP65 waterproof rating.

Imaxe: Lateral view of the flood light, illustrating the adjustable light heads and motion sensor for optimal positioning.

Instrucións de funcionamento

1. Power On and Initial Test

After installation, restore power at the circuit breaker. The light may cycle on and off briefly as it calibrates.

2. Funcionalidade do sensor de movemento

The integrated motion sensor detects movement within a 180° wide sensing angle and up to 50 feet away. When motion is detected, the light will turn on automatically. The duration the light stays on after motion ceases is typically adjustable (refer to specific model controls if available, usually a dial on the sensor itself).

Image: Diagram illustrating the wide-beam optics and motion sensor detection range, showing coverage up to 50 feet.

3. Dusk-to-Dawn Functionality

The built-in light sensor automatically detects ambient light levels. The fixture will activate at dusk and deactivate at dawn, ensuring illumination only when needed. This feature works in conjunction with the motion sensor, meaning the motion sensor will only be active during nighttime hours.

Image: Visual representation of the dusk-to-dawn sensor, showing the light activating as ambient light decreases and deactivating as it increases.

4. Adjusting Light Heads and Sensor

The two LED light heads and the motion sensor are adjustable. Carefully pivot them to direct light and motion detection to your desired areas. Do not overtighten adjustment screws.

Mantemento

• Limpeza: Asegúrese de que a electricidade estea desconectada antes de limpala. Limpe a luminaria cun pano suave eamp pano. Non empregue produtos de limpeza abrasivos nin disolventes, xa que poden danar o acabado ou os compoñentes eléctricos.
• Inspección: Periodically inspect the fixture for any signs of damage, loose wiring, or wear.
• LED: Os LED integrados están deseñados para unha longa vida útil e non son substituíbles polo usuario.

Image: The Feit Electric flood light shown in a rainy environment, emphasizing its IP65 wet-rated and weather-resistant construction.

Resolución de problemas

Garantía

This Feit Electric product is warranted to be free from defects in workmanship and materials for 5 anos from the date of purchase. If the product fails within the warranty period, please contact Feit Electric for replacement or refund. This warranty expressly excludes incidental and consequential damages.

Apoio

For technical assistance or further inquiries, please visit the official Feit Electric website or contact their customer support. Refer to the product packaging or the Feit Electric websitio para obter a información de contacto máis actualizada.

Feit Electric Websitio: www.feit.com