Introdución
Thank you for choosing the Atlanta 1888-0 Radio-Controlled Alarm Clock. This manual provides detailed instructions for the setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use to ensure proper functionality and to maximize your user experience.
Información importante de seguridade
- Manteña o dispositivo lonxe da auga e da humidade elevada.
- Non expoñas o dispositivo a temperaturas extremas, luz solar directa nin chamas abertas.
- Empregue só o tipo de pila especificado (4 pilas AAA). Asegúrese de manter a polaridade correcta durante a instalación.
- Retire as pilas se non vai usar o dispositivo durante un período prolongado para evitar fugas.
- Non intente desmontar nin reparar o dispositivo vostede mesmo. Encargue todo o mantemento a persoal cualificado.
- Manteña as pilas fóra do alcance dos nenos.
Contido do paquete
- Atlanta 1888-0 Radio-Controlled Alarm Clock
- Sensor de temperatura exterior sen fíos
- Manual de usuario
Produto rematadoview
The Atlanta 1888-0 is a radio-controlled alarm clock featuring a clear LCD display, two separate alarms, a snooze function, and indoor/outdoor temperature display via a wireless sensor.
Fronte View: Alarm Clock and Wireless Sensor
This image displays the main alarm clock unit on the left, showing its LCD screen with time, date, and temperature readings. To the right is the slim, white wireless outdoor temperature sensor.
Lado View: Control Buttons
This image shows the right side of the alarm clock, highlighting the three control buttons used for setting time, alarms, and adjusting values.
Traseira View: Battery Compartment and Stand
This image illustrates the back of the alarm clock, revealing the battery compartment cover and the integrated kickstand for desktop placement.
Sensor de temperatura sen fíos
Esta imaxe ofrece información detallada view of the wireless outdoor temperature sensor, a compact white unit designed to transmit outdoor temperature data to the main alarm clock.
Guía de configuración
Instalación de baterías
- Espertador: Open the battery compartment cover on the back of the alarm clock. Insert 2 x AAA batteries, ensuring correct polarity (+/-). Close the cover.
- Sensor sen fíos: Open the battery compartment cover on the back of the wireless sensor. Insert 2 x AAA batteries, ensuring correct polarity (+/-). Close the cover.
Initial Power-On and Radio Signal Reception
- After inserting batteries, the alarm clock will automatically begin searching for the DCF77 radio time signal. This process may take several minutes.
- Place the alarm clock near a window for optimal signal reception. A signal icon will appear on the display once synchronization is successful.
- The outdoor sensor will automatically connect to the alarm clock. Ensure the sensor is placed within range (typically up to 30 meters in open air) and away from direct sunlight or rain.
Manual Time Setting (Optional)
If the radio signal is weak or unavailable, you can set the time manually:
- Press and hold the 'SET' button (usually located on the side or back) until the hour digits begin to flash.
- Use os botóns "+" ou "-" para axustar a hora.
- Press 'SET' again to confirm the hour and move to the minute setting.
- Use os botóns "+" ou "-" para axustar os minutos.
- Press 'SET' to confirm and exit manual time setting.
Instrucións de funcionamento
Setting Alarms (Alarm 1 & Alarm 2)
- Press the 'ALARM' button once to view Tempo de alarma 1.
- Press and hold the 'ALARM' button until the Alarm 1 hour digits flash.
- Use the '+' or '-' buttons to set the desired hour for Alarm 1.
- Press 'ALARM' again to confirm the hour and move to the minute setting.
- Use the '+' or '-' buttons to set the desired minutes for Alarm 1.
- Press 'ALARM' to confirm and exit Alarm 1 setting.
- Repeat steps 1-6 for Alarm 2 by pressing 'ALARM' twice to view Tempo de alarma 2.
Activating/Deactivating Alarms
To activate or deactivate an alarm, press the 'ALARM' button repeatedly until the desired alarm icon (e.g., ① or ②) appears or disappears on the display. An active alarm will show its corresponding icon.
Función de repetición
When an alarm sounds, press the large 'SNOOZE/LIGHT' button (usually on top) to temporarily silence the alarm. The alarm will sound again after approximately 5-10 minutes (duration may vary by model). To turn off the alarm completely, press any other button or let it ring for its full duration.
Operación de contraluz
Press the 'SNOOZE/LIGHT' button to activate the white backlight for a few seconds, improving readability in low-light conditions.
Visualización de temperatura
The alarm clock displays both indoor ('IN') and outdoor ('OUT') temperatures. The outdoor temperature is received from the wireless sensor. Ensure the sensor is properly paired and within range for accurate readings.
Visualización da data
The LCD display shows the current date, including day of the week and month, automatically synchronized by the radio signal.
Mantemento
Limpeza
Wipe the alarm clock and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface.
Substitución da batería
When the display becomes dim or the outdoor temperature reading is inconsistent, it's time to replace the batteries in the respective units. Follow the battery installation steps outlined in the 'Setup Guide'.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Sen pantalla ou pantalla escura | As baterías están baixas ou están inseridas incorrectamente. | Substitúa as pilas por pilas AAA novas, asegurándose de manter a polaridade correcta. |
| Time is incorrect or not synchronizing | Weak radio signal; interference; clock too far from window. | Move the clock closer to a window. Avoid electronic devices that may cause interference. Perform manual time setting if necessary. |
| A temperatura exterior non se mostra ou é incorrecta | Sensor batteries low; sensor out of range; interference. | Replace sensor batteries. Move sensor closer to the alarm clock. Ensure no large metal objects are blocking the signal. |
| A alarma non soa | Alarm is not activated; alarm volume is too low (if adjustable). | Ensure the alarm icon is visible on the display. Check if there's a volume setting (if applicable). |
Especificacións técnicas
- Marca: Atlanta
- Número de modelo: 1888-0
- Cor: Branco
- Material: Plástico
- Tipo de visualización: LCD dixital
- Fonte de enerxía: Battery Powered (4 x AAA batteries required - 2 for clock, 2 for sensor)
- Dimensións do produto (L x W x H): Aproximadamente 7.5 x 7.5 x 2.5 cm
- Peso do artigo: Aproximadamente 120 gramos
- Características especiais: 2 separate alarms, Wireless temperature sensor, Snooze function, White backlight, Indoor and outdoor temperature display, Radio-controlled time synchronization.
Garantía e Soporte
Para obter información sobre a garantía ou asistencia técnica, consulte a documentación proporcionada no momento da compra ou póñase en contacto co seu vendedor. Garde o comprobante de compra para calquera reclamación de garantía.