Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight

1. Información de seguridade

Please read and understand all instructions completely before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• Risco de incendio: Supply conductors (power wiring) connecting to the fixture must be rated 90°C. If you are uncertain, consult a qualified electrician.
• Risco de descarga eléctrica: A instalación do kit de retrofit LED require coñecementos dos sistemas eléctricos de luminarias. Se non está cualificado, non intente a instalación. Contacte cun electricista cualificado.
• Install this kit only in luminaires that have the construction features and dimensions shown in the product documentation.
• To prevent wiring harness or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
• Este lamp is not intended for use with emergency exit luminaires or emergency lights.
• Antes de intentar a instalación, verifique o código eléctrico local, xa que establece estándares de cableado para a súa localidade.
• The fixture is designed to be switched from a wall switch. Ensure the black power supply wire is connected to the switch. Do NOT connect the white supply wire to the switch.
• Do not leave bare wires or exposed outside the wire nut connectors.
• Non faga nin altere ningún burato aberto nun recinto de cableado ou compoñentes eléctricos durante a instalación do kit.
• This product is ETL Listed and operates at 120VAC.

2. Produto rematadoview

The Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight is a canless, IC rated lighting fixture designed for various indoor applications. It features a round black trim and offers customizable lighting with 5 selectable color temperatures and dimming capabilities.

• Eficiencia enerxética: 9W LED, equivalent to 40W, consuming less power.
• Brillo: 550 Lumens with anti-glare lighting and a 36° beam spread.
• Color Temperature Selectable (CCT): Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight).
• Regulable: Compatible with most standard LED dimmers, offering a 20%-100% dimmable range.
• CRI alto: 90 CRI rating for accurate color appearance.
• Construción duradeira: Features a durable cast aluminum body and deep recessed trim.
• Damp Valorado: Adecuado para o seu uso en damp locations such as bathrooms and kitchens.

Figure 2.1: Maxxima 2-inch Ultra-Thin Recessed LED Downlight, Black

3. Lista de pezas

Asegúrate de que todos os compoñentes estean presentes antes de comezar a instalación:

• LED Downlight with spring clips
• Junction Box (with integrated CCT selection switch)
• Connector cable (pre-attached to downlight and junction box)
• Xunta de espuma

Figura 3.1: Lateral view of the Maxxima 2-inch Ultra-Thin Recessed LED Downlight, showing the heat sink and connector.

4. Configuración e instalación

This downlight is designed for easy installation without the need for a traditional recessed can or housing.

1. Preparar a apertura: Cut a hole in the ceiling drywall with a recommended diameter of 2.5 inches. Ensure there are no obstructions in the ceiling space.
2. Conectar cableado: Open the junction box. Connect the building's supply wires (typically black for live, white for neutral, and green/bare copper for ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure and comply with local electrical codes.
3. Seleccione a temperatura da cor: Before closing the junction box, use the CCT selection switch located inside the junction box to choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
4. Caixa de conexións de posición: Place the junction box into the ceiling beam or through the cutout hole into the ceiling cavity.
5. Conectar Downlight: Connect the downlight's cable to the junction box's cable using the provided quick connector. Ensure a firm connection.
6. Install Downlight: Gently push the spring clips on the sides of the downlight upwards. Insert the downlight into the cutout hole. The spring clips will automatically secure the fixture against the ceiling. Ensure the foam gasket creates a tight seal.

Figura 4.1: Dimensións do produto para a planificación da instalación.

Figure 4.2: CCT selection switch inside the junction box.

5. Instrucións de funcionamento

Once installed, operating your Maxxima LED downlight is straightforward.

5.1. Color Temperature Selection

The desired color temperature (CCT) must be selected using the switch inside the junction box antes installation or by accessing the junction box after installation. The available options are 2700K, 3000K, 3500K, 4000K, and 5000K.

Figure 5.1: Visual comparison of selectable color temperatures.

5.2. Atenuación

This downlight is dimmable from 20% to 100% with most standard LED dimmers. Ensure your dimmer switch is compatible with LED fixtures for optimal performance and to prevent flickering.

Figure 5.2: Downlight installed in a ceiling, demonstrating illumination.

6. Mantemento

The Maxxima LED downlight requires minimal maintenance.

• Limpeza: To clean the fixture, ensure power is off. Wipe the surface with a soft, dry, or slightly damp pano. Non use produtos químicos agresivos ou produtos de limpeza abrasivos.
• Non hai pezas reparables polo usuario: A fonte de luz LED está integrada e non se pode substituír. Non intente abrir nin reparar a luminaria.

7 Solución de problemas

If you encounter issues with your downlight, refer to the following common problems and solutions:

8. Especificacións

9. Garantía e soporte

This Maxxima LED downlight is covered by a 3 ano de garantía desde a data de compra.

For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima websitio para obter información de contacto actual.

Conserve o comprobante de compra para efectos da garantía.