Manual de instrucións do soporte de parede para TV PERLESMITH

Introdución

This manual provides detailed instructions for the safe and correct installation and operation of your PERLESMITH TV Wall Mounts, including the PSMTK1 Tilting Mount and the PSMFK7 Full Motion Mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.

Información importante de seguridade

AVISO: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.

• Do not install on drywall alone. The mount must be secured to a single wood stud, solid concrete, or brick wall.
• Asegúrate de que a estrutura da parede poida soportar con seguridade o peso combinado do soporte e do televisor.
• Use sempre un asistente para levantar e colocar o televisor.
• Do not exceed the maximum weight capacity specified for each mount model.
• Comprobe periodicamente todas as conexións e os elementos de fixación para garantir que se manteñan firmes.

Contido do paquete

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact PERLESMITH customer service.

PSMFK7 Full Motion TV Wall Mount Components

Image: The PSMFK7 full motion TV wall mount, showing the articulating arm, TV plate, wall plate, and small accessories like cable ties and a bubble level.

• Full Motion Wall Plate Assembly
• Soportes para TV (x2)
• Kit de ferraxes de montaxe (varios parafusos, ancoraxes, arandelas)
• Nivel de burbulla
• Bridas para cables

PSMTK1 Tilting TV Wall Mount Components

Image: The PSMTK1 tilting TV wall mount, showing the wall plate, TV brackets, and small accessories like cable ties and a bubble level.

• Tilting Wall Plate
• Soportes para TV (x2)
• Kit de ferraxes de montaxe (varios parafusos, ancoraxes, arandelas)
• Nivel de burbulla
• Bridas para cables

Configuración e instalación

1. Comprobacións previas á instalación

1. Verificar a compatibilidade do televisor:
       For PSMFK7: Fits most 26"-55" TVs up to 70 lbs (31.8 kg) with VESA patterns from 100x100mm to 400x400mm.
       For PSMTK1: Fits most 23"-60" TVs up to 115 lbs (52 kg) with VESA patterns from 75x75mm to 400x400mm.
   

   Image: Visual guide for PSMFK7 compatibility, indicating TV size range, weight capacity, and VESA mounting patterns.
2. Identificar o tipo de muro: This mount is designed for installation on single wood studs, solid concrete, or brick walls. NON instale só en paneles de yeso.
3. Check for Cable Blockage: Ensure the TV's power and input ports will not be blocked by the mounting brackets.

2. Fixación de soportes de TV ao televisor

1. Coloque con coidado o televisor boca abaixo sobre unha superficie suave e limpa.
2. Select the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA mounting holes.
3. Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are level and securely fastened.

3. Montaxe da placa de parede

1. Determine the desired height for your TV. Mark the drilling locations on the wall.
2. Para a instalación de montantes de madeira: Use a stud finder to locate the center of a wood stud. Drill pilot holes (e.g., 7/32" or 5.5mm) at the marked locations. Secure the wall plate using lag bolts and washers.
3. Para a instalación de muros de formigón/ladrillo: Drill pilot holes (e.g., 3/8" or 10mm) at the marked locations. Insert concrete anchors into the holes. Secure the wall plate using lag bolts and washers.
4. Use the included bubble level to ensure the wall plate is perfectly horizontal before tightening all fasteners.

4. Montaxe do televisor na placa de parede

1. With an assistant, carefully lift the TV with the attached brackets.
2. Engancha os soportes do televisor na placa de parede. Asegúrate de que o televisor estea ben asentado no soporte.
3. For PSMFK7: Secure the TV to the mount using the safety screws or locking mechanisms provided.
4. For PSMTK1: Engage the locking mechanism with the quick release pull-down straps to secure the TV.


Image: Simplified installation steps for the PSMTK1 mount, illustrating how the TV brackets hook onto the wall plate and the use of the pull cord for locking and releasing.

Funcionamento do soporte do televisor

PSMFK7 Full Motion Mount Adjustments

Image: Demonstrates the PSMFK7 mount's flexibility, including tilting down 15 degrees, extending up to 19.17 inches, swiveling 180 degrees, and leveling +/-3 degrees.

• Axuste de inclinación: The mount features a +5°/-15° tilt range. Loosen the tilt knobs on the TV brackets, adjust the TV to the desired angle, and then tighten the knobs to secure.
• Axuste de xiro: O brazo articulado permite un xiro de +/-90°. Empurra ou tira do televisor suavemente ata a posición desexada. viewángulo de ing.
• Extensión/Retracción: Extend the TV up to 19.17 inches (48.7 cm) from the wall for optimal viewing or retract it back to 3.2 inches (8.1 cm) for a low-profile mira.
• Axuste de nivelación: After installation, you can make a +/-3° leveling adjustment to ensure the TV is perfectly horizontal.

PSMTK1 Tilting Mount Adjustments

• Axuste de inclinación: The PSMTK1 allows for a downward tilt. Loosen the tilt bolts on the side of the TV brackets, adjust the TV to the desired angle, and then tighten the bolts.
• Mecanismo de bloqueo: Use the pull-down straps to engage or disengage the quick-release locking mechanism, securing the TV to the wall plate.

Mantemento

• Comprobe periodicamente todos os parafusos e bulóns para asegurarse de que estean axustados e seguros.
• Limpa o soporte cun pano suave e seco. Evita o uso de produtos de limpeza abrasivos ou solventes.
• Ensure no cables are pinched or stressed by the mount's movement.

Resolución de problemas

• A televisión non está nivelada: Use the leveling adjustment feature (PSMFK7) or re-adjust the tilt bolts (PSMTK1) and ensure the wall plate was installed level.
• A montaxe parece solta: Re-check all wall plate and TV bracket fasteners. Ensure they are tightened securely. If installed on a wood stud, confirm the lag bolts are fully engaged in the stud. If on concrete, ensure anchors are properly seated.
• Difficulty moving full motion mount: Check for any obstructions. Ensure all pivot points are free of debris. If the movement is too stiff or too loose, some joints may have adjustable tension screws (refer to specific model diagrams if available).
• Pezas que faltan: Do not proceed with installation. Contact PERLESMITH customer support for replacement parts.

Especificacións

Información da garantía

PERLESMITH products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your product or visit the official PERLESMITH websitio. Garde o recibo da compra como xustificante da mesma.

Atención ao cliente

If you have any questions, require assistance with installation, or need replacement parts, please contact PERLESMITH customer support. Our team is available to help you.

• Websitio: www.perlesmith.com (Hypothetical link, please replace with actual if available)
• Correo electrónico: support@perlesmith.com (Hypothetical email, please replace with actual if available)
• Teléfono: 1-800-XXX-XXXX (Hypothetical number, please replace with actual if available)