Uvex Wanted Adjustable Ski & Snowboard Helmet Instruction Manual

1. Introdución

This instruction manual provides essential information for the proper use, setup, operation, and maintenance of your Uvex Wanted Adjustable Ski & Snowboard Helmet. Please read this manual thoroughly before using your helmet to ensure maximum safety and performance. Retain this manual for future reference.

2. Información de seguridade

WARNING: No helmet can protect against all foreseeable impacts. Serious injury or death may occur. For maximum protection, the helmet must fit properly and all retention straps must be securely fastened.

• Always wear a helmet when skiing or snowboarding.
• Ensure the helmet fits snugly and comfortably, without obstructing vision or hearing.
• Nunca modifiques o teu casco. Calquera alteración pode comprometer as súas capacidades de protección.
• Replace your helmet immediately after any significant impact, even if visible damage is not apparent. The helmet's protective structure may be compromised.
• Avoid exposing the helmet to extreme heat, such as direct sunlight inside a car, as this can damage the materials.

3. Produto rematadoview & Características principais

The Uvex Wanted helmet is designed for comfort and protection during ski and snowboard activities. It incorporates several features to enhance your experience.

• Impact-Resistant Construction: Features a robust outer shell and an EPS inner shell for effective impact resistance and shock absorption.
• Adjustable IAS System: Allows for precise adaptation to the circumference of your head, ensuring a secure and comfortable fit.
• Functional Head Padding: Designed for increased wearing comfort and efficient climate management within the helmet.
• Closable Ventilation System: Provides adjustable airflow for optimal climate regulation, preventing overheating or excessive cold.
• Neck Padding: Enhances wearing comfort and improves the seal with your jacket collar, offering additional warmth and protection.

4. Setup & Fit Adjustment

4.1. Fitting the Helmet (IAS System)

The IAS (Individual Adapting System) allows for a personalized fit to your head circumference.

1. Place the helmet on your head, ensuring it sits level and covers your forehead without obstructing your vision.
2. Locate the adjustment dial at the back of the helmet.
3. Turn the dial clockwise to tighten the fit until the helmet feels snug and secure, but not uncomfortably tight.
4. Turn the dial counter-clockwise to loosen the fit.
5. The helmet should not move excessively when you shake your head.

4.2. Axuste da correa do queixo

The chin strap ensures the helmet remains in place during activity.

1. Fasten the chin strap buckle.
2. Adjust the strap length so that it is snug under your chin, allowing only one or two fingers to fit between the strap and your chin.
3. Ensure the strap does not chafe or cause discomfort.
4. The helmet should not be able to roll forward or backward off your head when the strap is fastened.

4.3. Goggle Strap Attachment

The helmet includes an elastic cord with a hook at the back to secure goggle straps, preventing them from slipping.

5. Operating the Ventilation System

The Uvex Wanted helmet features a closable ventilation system to manage your head temperature.

1. Locate the slide switch on the top of the helmet.
2. Slide the switch forward to open the vents, allowing cool air to circulate and release excess heat.
3. Slide the switch backward to close the vents, retaining warmth in colder conditions.

6. Coidados e mantemento

6.1. Limpeza

• Carcasa exterior: Clean the outer shell with a soft cloth, mild soap, and water. Avoid abrasive cleaners or solvents, as these can damage the helmet material.
• Inner Padding: The inner liner is removable and washable. Hand wash with mild soap and water, then air dry completely before reinserting into the helmet.

6.2. Almacenamento

• Garda o casco nun lugar fresco e seco lonxe da luz solar directa e de temperaturas extremas.
• Avoid placing heavy objects on the helmet, which could deform its shape or compromise its integrity.

6.3. Inspección

• Regularly inspect your helmet for any signs of damage, such as cracks, dents, or frayed straps.
• If any damage is found, replace the helmet immediately.

7 Solución de problemas

If you encounter issues with your Uvex Wanted helmet, consider the following:

• Mal axuste: Re-adjust the IAS system and chin strap according to the instructions in Section 4. A helmet that is too loose or too tight will not provide adequate protection.
• Molestias: Ensure all padding is correctly positioned. If discomfort persists, verify the helmet size is appropriate for your head circumference.
• Ventilation Issues: Check that the ventilation slider is fully open or closed as desired. Clear any obstructions from the vents.
• Danos visibles: Any visible damage to the shell, liner, or straps indicates the helmet's protective capacity may be compromised. Replace the helmet immediately.

8. Especificacións técnicas

9. Garantía e atención ao cliente

For warranty information, product support, or any questions not covered in this manual, please contact Uvex customer service through their official website or the retailer where the helmet was purchased. Keep your proof of purchase for warranty claims.

For more information, visit the official Uvex websitio: www.uvex-sports.com